Abstract:Reinforcement mechanism of short carbon fibers in 3D‐printed short‐continuous carbon fiber reinforced thermoplastic composites. 3D printing of continuous carbon fiber reinforced thermoplastic (C‐CFRTP) composites is a promising fabricating process to achieve complex lightweight structures within a short time; nevertheless, low mechanical performance between printed layers is always a limitation. Adding short carbon fibers during C‐CFRTP fabrication could achieve short‐continuous carbon fiber reinforced thermoplastic (S/C‐CFRTP) composites with enhanced mechanical properties. However, the underlying reinforcement mechanism is not well understood, which hinders the optimization of 3D printing process for S/C‐CFRTP. This paper investigates reinforcing behavior of short carbon fibers and impregnation behavior of the matrix (short carbon fiber reinforced PA6) under various 3D printing conditions. The results indicate that promoting both reinforcing and impregnation behaviors during S/C‐CFRTP 3D printing can improve mechanical performance. As short carbon fiber content increases, the mechanical performance initially experiences enhancement caused by the reinforcing behavior of short fibers, followed by a decline attributed to the insufficient impregnation of the molten matrix. Higher nozzle temperatures facilitate the impregnation behavior of the molten matrix, resulting in superior mechanical performance. Moreover, by leveraging the reinforcement mechanism, the optimal parameter combination is proposed to improve tensile, flexural, and interlaminar shear strengths of the 3D‐printed S/C‐CFRTP to approximately 368.27, 319.80, and 20.09 MPa, respectively. Highlights Reinforcement mechanism is revealed by reinforcing and impregnation behaviors. Short carbon fiber content affects both reinforcing and impregnation behaviors. Beyond 15 wt%, short carbon fiber content shows adverse effects on performance. High nozzle temperature promotes impregnation behavior to improve performance. Optimal parameters raise 19.8% tensile, 39.9% flexural and 161.2% shear strength.

3D printing single‐stroke path planning, local reinforcement and performance testing of MBB beams and cantilever beams

Multiscale concurrent design and 3D printing of continuous fiber reinforced thermoplastic composites with optimized fiber trajectory and topological structure

3D printing of continuous carbon fibre reinforced polymer composites with optimised structural topology and fibre orientation

Evaluation of Carbon Fiber-Embedded 3D Printed Structures for Strengthening and Structural-Health Monitoring

Path Planning and Bending Behaviors of 3D Printed Continuous Carbon Fiber Reinforced Polymer Honeycomb Structures

Exceptional mechanical performance by spatial printing with continuous fiber: Curved slicing, toolpath generation and physical verification

Buckling performance-aware path planning for 3D printing of curved grid-stiffened fiber-reinforced polymer composite structures

Controllable Inter-Line Bonding Performance and Fracture Patterns of Continuous Fiber Reinforced Composites by Sinusoidal-Path 3D Printing

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

Bending performance and failure behavior of 3D printed continuous fiber reinforced composite corrugated sandwich structures with shape memory capability

3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance

Progressive concurrent topological optimization with variable fiber orientation and content for 3D printed continuous fiber reinforced polymer composites

3D printing of continuous fiber reinforced cellular structural composites for the study of bending performance

Topology design of 3D printing continuous fiber reinforced structure considering strength and non‐equidistant fiber

3D Printed Continuous Fibre Reinforced Composite Corrugated Structure

Study on short fiber reinforcement mechanism for mechanical performance improvement of 3D‐printed short‐continuous carbon fiber reinforced thermoplastic composites

Research on Mechanical Properties of a 3D Concrete Printing Component-Optimized Path by Multimodal Analysis

Improved Structural Efficiency in Composite Manufacturing via Hammered Printing for Large-Curvature Fiber Paths

Mechanical behavior of FRP sheets reinforced 3D elements printed with cementitious materials

Bending Properties and Failure Behavior of 3D Printed Fiber Reinforced Resin T‐beam

3D Printing Technology for Short-continuous Carbon Fiber Synchronous Reinforced Thermoplastic Composites: A Comparison between Towpreg Extrusion and In Situ Impregnation Processes