Abstract:Purpose Various iron loss models can be used for the simulation of electrical machines. In particular, the effect of rotating magnetic flux density at certain geometric locations in a machine is often neglected by conventional iron loss models. The purpose of this paper is to compare the adapted IEM loss model for rotational magnetization that is developed within the context of this work with other existing models in the framework of a finite element simulation of an exemplary induction machine. Design/methodology/approach In this paper, an adapted IEM loss model for rotational magnetization, developed within the context of the paper, is implemented in a finite element method simulation and used to calculate the iron losses of an exemplary induction machine. The resulting iron losses are compared with the iron losses simulated using three other already existing iron loss models that do not consider the effects of rotational flux densities. The used iron loss models are the modified Bertotti model, the IEM-5 parameter model and a dynamic core loss model. For the analysis, different operating points and different locations within the machine are examined, leading to the analysis of different shapes and amplitudes of the flux density curves. Findings The modified Bertotti model, the IEM-5 parameter model and the dynamic core loss model underestimate the hysteresis and excess losses in locations of rotational magnetizations and low-flux densities, while they overestimate the losses for rotational magnetization and high-flux densities. The error is reduced by the adapted IEM loss model for rotational magnetization. Furthermore, it is shown that the dynamic core loss model results in significant higher hysteresis losses for magnetizations with a high amount of harmonics. Originality/value The simulation results show that the adapted IEM loss model for rotational magnetization provides very similar results to existing iron loss models in the case of unidirectional magnetization. Furthermore, it is able to reproduce the effects of rotational flux densities on iron losses within a machine simulation.

Influence of Iron Losses on Switching Dynamics of an Electromagnet from Experiment and Simulation

Influence of Rotor Configuration on Iron and Magnet Losses of Fractional-Slot IPM Machines

Analytical Model for Predicting Magnet Loss of Surface-Mounted Permanent Magnet Machines Accounting for Slotting Effect and Load

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

Iron-Loss and Magnetic Hysteresis Under Arbitrary Waveforms in NO Electrical Steel: A Comparative Study of Hysteresis Models

Study on Influence of Processing Methods on Loss Coefficients of Iron Loss Model

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Simulation of iron losses in induction machines using an iron loss model for rotating magnetization loci in no electrical steel

Predicting Iron Losses in Laminated Steel with Given Non-Sinusoidal Waveforms of Flux Density

Generalized Dynamic Hysteresis Model for Improved Iron Loss Estimation of Complex Flux Waveforms

Study on Iron Loss in Two Kinds of Moving-magnet Linear Motors

Iron-Loss Model With Consideration of Minor Loops Applied to FE-Simulations of Electrical Machines

Iron Loss Separation in High Frequency Using Numerical Techniques

Importance of Iron-Loss Modeling in Simulation of Wound-Field Synchronous Machines

Dynamic Reluctance Mesh Modeling and Losses Evaluation of Permanent Magnet Traction Motor

Soft magnetic material degradation due to manufacturing process: A comparison of measurements and numerical simulations

Hysteresis Loss in NdFeB Permanent Magnets in a Permanent Magnet Synchronous Machine

Optimum Identification of Iron Loss Models in NGO Electrical Steel for Power Electronics

Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation

Fast Iron Loss and Thermal Prediction Method for Power Density and Efficiency Improvement in Switched Reluctance Machines