Abstract:Recently, there has been an increase in the use of antimony sulfide (Sb2S3) in Si-based tandem solar cells as a potential absorber material for top sub-cells. The choice of the material stems from the favoured properties such as appropriate bandgap, simple binary composition, nontoxic elements, and long-term stability. However, the physical properties and practical applicability of these materials depend largely on their synthesis conditions. In this work, we investigate the role of sulfurization on the structural, morphological, compositional, and optical properties of Sb2S3 thin films deposited on soda-lime glass via a thermal evaporation technique. Sulfurization was performed on the as-prepared thin films in a customized Chemical Vapor Deposition (CVD) chamber at five different temperatures. Analysis of the crystallinity of the film using the X-ray diffraction technique illustrates the transformation of the film from impure, poor crystalline phase to phase-pure, and highly crystalline orthorhombic structure due to sulfurization. Scanning electron microscopic investigations of the samples revealed better grains with nanorods on the surface at a temperature of 4000C. For the samples investigated here, the energy values estimated via density functional theory (DFT) calculations agreed well with the experimental data obtained from UV-visible absorption spectral studies. Additionally, it was observed that the desired near-stoichiometric Sb2S3 thin films could be achieved via sulfurization, and the presence of Sb2S3 in all samples was confirmed via Raman spectroscopic studies. Additionally, the defects and trap states of the prepared films were investigated using photoluminescence studies, and donor and acceptor defects were identified. Our study revealed that sulfur rich Sb2S3 films prepared at a sulfurization temperature of 400°C produced the desired structure, morphology, and optical qualities for future photovoltaic applications.

Antimony sulfide thin films prepared by laser assisted chemical bath deposition

Antimony sulfide (Sb2S3) thin films by pulse electrodeposition: Effect of thermal treatment on structural, optical and electrical properties

Two-step Synthesis of Antimony Sulfide Thin films: Enhancement in Physical Properties Through Sulfurization

Van der Waals Epitaxy of Pulsed Laser Deposited Antimony Thin Films on Lattice-matched and Amorphous Substrates

Preparation and characterization of Sb2Se3 thin films by electrodeposition and annealing treatment

Structural and optical properties of amorphous and crystalline antimony sulfide thin-films

Effect of selenisation on the properties of antimony selenide thin films

Antimony sulfide thin films in chemically deposited thin film photovoltaic cells

Fabrication and characterization of CuInS 2 films by chemical bath deposition in acid conditions

Antimony Thin Film as a Robust Broadband Saturable Absorber

Structure, Morphology, and Photoelectric Performances of Te-Sb 2 Se 3 Thin Film Prepared via Magnetron Sputtering.

Sb2S3 Thin Films Prepared by Vulcanizing Evaporated Metallic Precursors

Crystallization of antimony sulfide films on stainless steel substrates obtained by sequential chemical bath deposition

Preparation and characterization of spray deposited photoactive Sb2S3 and Sb2Se3 thin films using aqueous and non-aqueous media

Synthesis and characterization Bi2O2S thin film via chemical bath deposition at low pH

Improvement of the photoelectrical properties of chemical bath-deposited Sb2S3 thin films with low copper doping

Chemical bath deposition of Sb2S3 thin films using the mixing solution of SbCl3 and sodium citrate as a novel Sb source for assembling efficient solar cells

Thorough investigation of the optical, electrical and thermal properties of Cu3Se2 thin film deposited by chemical bath deposition

Microstructural and Optical Properties of Sb2S3 Film Thermally Evaporated from Antimony Pentasulfide and Efficient Planar Solar Cells

Efficient planar antimony sulfide thin film photovoltaics with large grain and preferential growth

Transport properties of indium sulfide thin films deposited by chemical bath deposition