Abstract:Conventional flighted rotary drums usually have flights parallel to the rotating axis, which cannot facilitate the axial motion of the materials in the drum. Here, a new type of horizontal rotary drum with inclined flights and beads was designed. Inclined flights are used to facilitate the axial movement of beads and material, while beads are used as fillers to increase the gas-liquid contact area and to crush the solid materials. We simulated the drum and studied the axial motion of fillers using the discrete element method (DEM). To improve the mass and heat transfer performance, we optimized the distribution of beads in the active phase. The effects of the rotational speed, joint angle, and inlet flow rate in the drum were investigated systematically. The individual effects were evaluated in terms of the mass of particles in the active phase (MAP) and passive phase (MPP), the percentage of the active phase occupied by the particles (OAR), and the axial speed (AS). The response surface methodology (RSM) was used to investigate the significant effects of the interaction between the parameters. The maximum MAP value can be obtained by the following parameters: a rotational speed of 37 rpm, joint angle of 139°, and inlet flow rate of 7.83 kg/s. The interaction between rotational speed and inlet flow rate is the most significant for MAP. The joint angle and inlet flow rate have a significant interactive effect on AS. Besides, the rotational speed, joint angle and inlet flow rate show an interactive effect on OAR and AS. Based on the optimization results, the effect of the inclined angle on the axial motion of beads was also evaluated. The axial motion of the beads occurs mainly in the active phase. Compared to the drum without inclined flights, the drum with inclined flights has an enhanced axial speed increased by 26%. This study will be helpful for the design and optimization of drums with inclined flights.

Research on separation performance of a rotary drum separator with consideration of sidewall capture

Numerical Study on the Flow Field and Separation Efficiency of a Rotary Drum Separator

Experimental Study and Numerical Simulation of the Characteristics of a Percussive Gas–solid Separator

Numerical and Experimental Study of Radial Segregation of Bi-Disperse Particles in a Quasi-Two-dimensional Horizontal Rotating Drum

Experimental investigation on separation characteristics of axial cyclone separator

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

Investigating the Flow of Rod-Like Particles in a Horizontal Rotating Drum Using DEM Simulation

Study of the performance and flow field of a new spiral-roof cyclone separator

DEM investigation of the axial dispersion behavior of a binary mixture in the rotating drum

Modelling of the Flow of Ellipsoidal Particles in a Horizontal Rotating Drum Based on DEM Simulation

DEM Simulation of a Rotary Drum with Inclined Flights Using the Response Surface Methodology

Numerical study on the effect of drum on the flow behavior of binary-size particles in rotating drums

Experimental Study of the Separation Performance of a Square Separator Assuming a Horizontal Heat Exchange Mode

Numerical study on the performance of swirl tube based on orthogonal design

Numerical Investigation on the Effect of Section Width on the Performance of Air Ejector with Rectangular Section

Separation mechanism and influential factor study on vane-type-associated petroleum gas separator

Experimental study on the separation performance of a novel gas–liquid separator

Optimization of Airflow Field for Pneumatic Drum Magnetic Separator to Improve the Separation Efficiency

Performance experiments and pressure drop prediction modelling of an energy-saving cyclone separator

Transition of Axial Segregation Patterns in A Long Rotating Drum

CFD Investigation on the Performance of Cyclone Separators with Divergent or Convergent Insertion Pipes