Abstract:Safe autonomous vehicle (AV) operations depend on an accurate perception of the driving environment, which necessitates the use of a variety of sensors. Computational algorithms must then process all of this sensor data, which typically results in a high on-vehicle computational load. For example, existing lane markings are designed for human drivers, can fade over time, and can be contradictory in construction zones, which require specialized sensing and computational processing in an AV. But, this standard process can be avoided if the lane information is simply transmitted directly to the AV. High definition maps and road side units (RSUs) can be used for direct data transmission to the AV, but can be prohibitively expensive to establish and maintain. Additionally, to ensure robust and safe AV operations, more redundancy is beneficial. A cost-effective and passive solution is essential to address this need effectively. In this research, we propose a new infrastructure information source (IIS), chip-enabled raised pavement markers (CERPMs), which provide environmental data to the AV while also decreasing the AV compute load and the associated increase in vehicle energy use. CERPMs are installed in place of traditional ubiquitous raised pavement markers along road lane lines to transmit geospatial information along with the speed limit using long range wide area network (LoRaWAN) protocol directly to nearby vehicles. This information is then compared to the Mobileye commercial off-the-shelf traditional system that uses computer vision processing of lane markings. Our perception subsystem processes the raw data from both CEPRMs and Mobileye to generate a viable path required for a lane centering (LC) application. To evaluate the detection performance of both systems, we consider three test routes with varying conditions. Our results show that the Mobileye system failed to detect lane markings when the road curvature exceeded ±0.016 m−1. For the steep curvature test scenario, it could only detect lane markings on both sides of the road for just 6.7% of the given test route. On the other hand, the CERPMs transmit the programmed geospatial information to the perception subsystem on the vehicle to generate a reference trajectory required for vehicle control. The CERPMs successfully generated the reference trajectory for vehicle control in all test scenarios. Moreover, the CERPMs can be detected up to 340 m from the vehicle's position. Our overall conclusion is that CERPM technology is viable and that it has the potential to address the operational robustness and energy efficiency concerns plaguing the current generation of AVs.

Challenges in Partially-Automated Roadway Feature Mapping Using Mobile Laser Scanning and Vehicle Trajectory Data

THE IMPLEMENTATION OF SEMI-AUTOMATED ROAD SURFACE MARKINGS EXTRACTION SCHEMES UTILIZING MOBILE LASER SCANNED POINT CLOUDS FOR HD MAPS PRODUCTION

3D Road Boundary Extraction Based on Machine Learning Strategy Using LiDAR and Image-Derived MMS Point Clouds

Automatic Extraction of Structural and Non-Structural Road Edges from Mobile Laser Scanning Data

Updating a digital geographic database using vehicle-borne laser scanners and line cameras

Image-Aided LiDAR Extraction, Classification, and Characterization of Lane Markings from Mobile Mapping Data

Rapid Geometric Evaluation of Transportation Infrastructure Based on a Proposed Low-Cost Portable Mobile Laser Scanning System

Automatic Road Marking Extraction and Vectorization from Vehicle-Borne Laser Scanning Data

An End-to-End System for Crowdsourced 3d Maps for Autonomous Vehicles: The Mapping Component

Urban Three-dimensional (3-D) Road Surface Reconstruction Based on a Data Assimilation Algorithm Using a Mobile Laser Scanning (MLS) System

Pavement Distress and Debris Detection using a Mobile Mapping System with 2D Profiler LiDAR

Automated Lane Centering: An Off-the-Shelf Computer Vision Product vs. Infrastructure-Based Chip-Enabled Raised Pavement Markers

Acquiring Data for Highway Maintenance Using Fixed Terrestrial 3d Laser Scanning System

Enhanced Perception for Autonomous Vehicles at Obstructed Intersections: An Implementation of Vehicle to Infrastructure (V2I) Collaboration

Road Boundary Detection Using Multi-channel LiDAR Based on Disassemble-reassemble-merge Algorithm for Autonomous Driving

INS-AIDED 3D LIDAR SEAMLESS MAPPING IN CHALLENGING ENVIRONMENT FOR FUTURE HIGH DEFINITION MAP

Automatic Extraction of Relevant Road Infrastructure using Connected vehicle data and Deep Learning Model

Roadside LiDAR Assisted Cooperative Localization for Connected Autonomous Vehicles

GPS trajectory-based segmentation and multi-filter-based extraction of expressway curbs and markings from mobile laser scanning data

Highway Asset and Pavement Condition Management using Mobile Photogrammetry

Evaluation of Remote Sensing Technologies for Collecting Roadside Feature Data to Support Highway Safety Manual Implementation