Abstract:Safe autonomous vehicle (AV) operations depend on an accurate perception of the driving environment, which necessitates the use of a variety of sensors. Computational algorithms must then process all of this sensor data, which typically results in a high on-vehicle computational load. For example, existing lane markings are designed for human drivers, can fade over time, and can be contradictory in construction zones, which require specialized sensing and computational processing in an AV. But, this standard process can be avoided if the lane information is simply transmitted directly to the AV. High definition maps and road side units (RSUs) can be used for direct data transmission to the AV, but can be prohibitively expensive to establish and maintain. Additionally, to ensure robust and safe AV operations, more redundancy is beneficial. A cost-effective and passive solution is essential to address this need effectively. In this research, we propose a new infrastructure information source (IIS), chip-enabled raised pavement markers (CERPMs), which provide environmental data to the AV while also decreasing the AV compute load and the associated increase in vehicle energy use. CERPMs are installed in place of traditional ubiquitous raised pavement markers along road lane lines to transmit geospatial information along with the speed limit using long range wide area network (LoRaWAN) protocol directly to nearby vehicles. This information is then compared to the Mobileye commercial off-the-shelf traditional system that uses computer vision processing of lane markings. Our perception subsystem processes the raw data from both CEPRMs and Mobileye to generate a viable path required for a lane centering (LC) application. To evaluate the detection performance of both systems, we consider three test routes with varying conditions. Our results show that the Mobileye system failed to detect lane markings when the road curvature exceeded ±0.016 m−1. For the steep curvature test scenario, it could only detect lane markings on both sides of the road for just 6.7% of the given test route. On the other hand, the CERPMs transmit the programmed geospatial information to the perception subsystem on the vehicle to generate a reference trajectory required for vehicle control. The CERPMs successfully generated the reference trajectory for vehicle control in all test scenarios. Moreover, the CERPMs can be detected up to 340 m from the vehicle's position. Our overall conclusion is that CERPM technology is viable and that it has the potential to address the operational robustness and energy efficiency concerns plaguing the current generation of AVs.

Enhanced Perception for Autonomous Vehicles at Obstructed Intersections: An Implementation of Vehicle to Infrastructure (V2I) Collaboration

A Multiple Vehicle Sensing Approach for Collision Avoidance in Progressively Deployed Vehicle Networks.

ISAC-Assisted Collision Avoidance Mechanism for Vehicle-to-Infrastructure Systems

Infrastructure-Assisted Collaborative Perception in Automated Valet Parking: A Safety Perspective

Augmented Intelligence in Smart Intersections: Local Digital Twins-Assisted Hybrid Autonomous Driving

Vehicle-to-Everything (V2X) Communication: A Roadside Unit for Adaptive Intersection Control of Autonomous Electric Vehicles

Enhanced Cooperative Perception for Autonomous Vehicles Using Imperfect Communication

V2I based environment perception for autonomous vehicles at intersections

Performance and Scaling of Collaborative Sensing and Networking for Automated Driving Applications

Design, Implementation, and Evaluation of a Roadside Cooperative Perception System

V2X-Communication-Aided Autonomous Driving: System Design and Experimental Validation

LiDAR Based Cooperative Sensing in Vehicular Edge Computing

Optimal Placement of Roadside Infrastructure Sensors towards Safer Autonomous Vehicle Deployments

Demonstrations of Cooperative Perception: Safety and Robustness in Connected and Automated Vehicle Operations

Traffic Safety Assessment with Integrated Communication System of Connected and Automated Vehicles at Signalized Intersections

LiDAR-Enhanced Connected Infrastructures Sensing and Broadcasting High-Resolution Traffic Information Serving Smart Cities

Enhancing Transportation Safety with Infrastructure Cooperative Autonomous Driving System

Roadside LiDAR Assisted Cooperative Localization for Connected Autonomous Vehicles

V2X-Lead: LiDAR-based End-to-End Autonomous Driving with Vehicle-to-Everything Communication Integration

Automated Lane Centering: An Off-the-Shelf Computer Vision Product vs. Infrastructure-Based Chip-Enabled Raised Pavement Markers

MSight: An Edge-Cloud Infrastructure-based Perception System for Connected Automated Vehicles