Abstract:Maintenance of roadside ditches is important to avoid localized flooding and premature failure of pavements. Scheduling effective preventative maintenance requires mapping of the ditch profile to identify areas requiring excavation of long-term sediment accumulation. High-resolution, high-quality point clouds collected by mobile LiDAR mapping systems (MLMS) provide an opportunity for effective monitoring of roadside ditches and performing hydrological analyses. This study evaluated the applicability of mobile LiDAR for mapping roadside ditches for slope and drainage analyses. The performance of alternative MLMS units was performed. These MLMS included an unmanned ground vehicle, an unmanned aerial vehicle, a portable backpack system along with its vehicle-mounted version, a medium-grade wheel-based system, and a high-grade wheel-based system. Point cloud from all the MLMS units were in agreement in the vertical direction within the ±3 cm range for solid surfaces, such as paved roads, and ±7 cm range for surfaces with vegetation. The portable backpack system that could be carried by a surveyor or mounted on a vehicle and was the most flexible MLMS. The report concludes that due to flexibility and cost effectiveness of the portable backpack system, it is the preferred platform for mapping roadside ditches, followed by the medium-grade wheel-based system. Furthermore, a framework for ditch line characterization is proposed and tested using datasets acquired by the medium-grade wheel-based and vehicle-mounted portable systems over a state highway. An existing ground filtering approach is modified to handle variations in point density of mobile LiDAR data. Hydrological analyses, including flow direction and flow accumulation, are applied to extract the drainage network from the digital terrain model (DTM). Cross-sectional/longitudinal profiles of the ditch are automatically extracted from LiDAR data and visualized in 3D point clouds and 2D images. The slope derived from the LiDAR data was found to be very close to highway cross slope design standards of 2% on driving lanes, 4% on shoulders, as well as 6-by-1 slope for ditch lines. Potential flooded regions are identified by detecting areas with no LiDAR return and a recall score of 54% and 92% was achieved by the medium-grade wheel-based and vehicle-mounted portable systems, respectively. Furthermore, a framework for ditch line characterization is proposed and tested using datasets acquired by the medium-grade wheel-based and vehicle-mounted portable systems over a state highway. An existing ground filtering approach is modified to handle variations in point density of mobile LiDAR data. Hydrological analyses, including flow direction and flow accumulation, are applied to extract the drainage network from the digital terrain model (DTM). Cross-sectional/longitudinal profiles of the ditch are automatically extracted from LiDAR data, and visualized in 3D point clouds and 2D images. The slope derived from the LiDAR data was found to be very close to highway cross slope design standards of 2% on driving lanes, 4% on shoulder, as well as 6-by-1 slope for ditch lines. Potential flooded regions are identified by detecting areas with no LiDAR return and a recall score of 54% and 92% was achieved by the medium-grade wheel-based and vehicle-mounted portable systems, respectively.

Evaluation of Remote Sensing Technologies for Collecting Roadside Feature Data to Support Highway Safety Manual Implementation

Evaluation of Geo-Tagged Photo and Video Logging Methods to Collect Geospatial Highway Inventory Data

Highway Asset and Pavement Condition Management using Mobile Photogrammetry

Leveraging Connected Vehicle Data for Near-Crash Detection and Analysis in Urban Environments

Implementation of A Multi-Modal Mobile Sensor System for Surface and Subsurface Assessment of Roadways

Towards application of light detection and ranging sensor to traffic detection: an investigation of its built-in features and installation techniques

A Pre-study on Data Processing Pipelines for Roadside Object Detection Systems Towards Safer Road Infrastructure

Rapid Geometric Evaluation of Transportation Infrastructure Based on a Proposed Low-Cost Portable Mobile Laser Scanning System

Automatic Background Construction and Object Detection Based on Roadside LiDAR

Pavement Distress and Debris Detection using a Mobile Mapping System with 2D Profiler LiDAR

SmartRoad

Smartphone Sensing of Road Surface Condition and Defect Detection

Status, Challenges, and Trends of International Research on Roadside Safety

Real-Time Road Detection Using Lidar Data

A Roadside Precision Monocular Measurement Technology for Vehicle-to-Everything (V2X)

Image-Aided LiDAR Extraction, Classification, and Characterization of Lane Markings from Mobile Mapping Data

Evaluating Roadside Perception for Autonomous Vehicles: Insights from Field Testing

Acquiring Data for Highway Maintenance Using Fixed Terrestrial 3d Laser Scanning System

Highway Safety Metrics Implementation and Evaluation Using a Geographic Information System–Based Screening Tool

Road Ditch Line Mapping with Mobile LiDAR

Verification and Employment of Crowd-Sourcing Data in Road Safety Assessment