Abstract:Proton exchange membrane fuel cells, PEMFCs, are one of the most promising means of obtaining electrical energy in the rapidly developing hydrogen energy industry. Maintaining the high specific energy characteristics of PEMFCs requires effective control and diagnostic systems with the ability to detect malfunctions and suboptimal operating modes at the early stages of development. Methods that allow in-process diagnostics, such as impedance, relaxation, and fluctuation-noise characteristic analysis, are best suited for this purpose. The application of such methods implies the use of small-signal electrical models, of which the Ershler–Randles equivalent circuit is the most widely used. The most challenging aspect of modeling and identification based on the experimental data of this circuit is diffusion impedance. The present work addresses the issue of approximating Warburg impedance using Cauer circuits and minimizing their parametric description, thereby facilitating the effective determination of the diffusion impedance parameters during identification based on experimental data. The work demonstrates that it is feasible to delineate short-circuited Warburg impedance in a wide range of the frequency spectrum through the utilization of Cauer networks of the second to fifth order, characterized by only two intrinsic parameters: the time constant and resistance. In this case, the RMS approximation errors do not exceed 0.5%. It is proposed that the second- and third-order models be employed, as the first-order model lacks the requisite accuracy, and the use of models of higher orders results in an increase in the complexity of the computational procedures. Furthermore, the error is predominantly attributable to the high-frequency range. In practical applications, its impact will diminish, as the total impedance of the PEMFC within this range is dependent upon the other elements of the equivalent circuit. The proposed approaches to the description of small-signal electrical models will facilitate the enhancement of signal-processing procedures for diagnostics and modeling of the operational modes of PEMFC and other electrochemical sources of electric energy, thereby increasing their efficiency.

A Simple Method for a Digital Readout of Randles Impedances

Impedance Spectroscopy Based on Linear System Identification

An LC Resonant Method for the Accurate Extraction of Small Parasitic Resistance

Design, Development and Comparison of two Different Measurements Devices for Time-Resolved Determination of Phase Shifts of Bioimpedances

A Simple Digital Readout Circuit for Differential Resistive or Capacitive Sensors

Achieving Reliable and Repeatable Electrochemical Impedance Spectroscopy of Rechargeable Batteries at Extra-Low Frequencies

Perturbation Amplitudes Design Method Based on Confidence Interval Evaluation for Impedance Measurement

Digital Impedance Emulator for Battery Measurement System Calibration

Design Method of Multisine Signal for Broadband Impedance Measurement

An Electronic Measurement Instrumentation of the Impedance of a Loaded Fuel Cell or Battery

Robust and Fast Estimation of Equivalent Circuit Model from Noisy Electrochemical Impedance Spectra

Robust Approach to Battery Equivalent-Circuit-Model Parameter Extraction Using Electrochemical Impedance Spectroscopy

Accuracy Bottlenecks in Impedance Spectroscopy due to Transient Effects

A Noise Interference Suppression Method with Optimized Frequency Adjustment for Impedance Measurement

A Novel Multi-sinusoidal PWM Excitation for Online Battery Impedance Spectroscopy Identification and Implementation by Reconfigurable Battery Systems

On the Use of Cramer-Rao Lower Bound for Least-Variance Circuit Parameters Identification of Li-ion Cells

High Precision, Low Complexity, and Fast Calculation Based on Hybrid Recursive DFT and FFT Algorithms for Electrochemical Impedance Spectroscopy System

Small-Signal Electrical Model of PEM Fuel Cell

Internal Parameter Estimation of Lithium-Ion Battery Using AC Ripple With DC Offset Wave in Low and High Frequencies

Identifiability of generalised Randles circuit models

Uncertainty Characterization of a Practical System for Broadband Measurement of Battery EIS