Abstract:Aluminosilicate glass holds significant importance across various applications including display screens, medical devices, and the aerospace industry, owing to its excellent optical properties, superior strength, and chemical resistance. Compared with frequently used high-temperature fusion bonding, low-temperature direct glass bonding, with its potential for reliable, non-damaging fabrication of glass-based devices, is highly promising. However, achieving aluminosilicate glass bonding at a low temperature has remained a challenge due to its inherent chemical stability. This paper proposes a novel low-temperature fusion bonding method using a standard cleaning recipe assistant with intermediate water, resulting in bonding strength exceeding 10 MPa and optical transmittance surpassing 90 % at a moderate annealing temperature of 200 degrees C. Through surface and interface characterization, the role of water intermedia and bonding mechanism is analyzed and declared. The water trapped in the bonding interface reacts with the glass and lowers the glass transition temperature (T-g), softening the glass and filling the nanoscale gaps to further increase the bonding area in the low-temperature annealing process. Consequently, a continuous bonding interface is established, contributing to robust bonding strength and avoiding optical loss. Finally, this method is further demonstrated through the successful bonding of the glass with grating structures showing great optical properties. Notably, in contrast to traditional fusion bonding, this low-temperature fusion bonding method will not destroy the microstructures in the devices. This bonding strategy paves the way for the applications of aluminosilicate glass.

Obtaining transparent silica glass from nano-silica hydrosol

A High-Efficiency and Energy-Saving Method for Purifying Industrial Silicon for Silicone Use

Sol–gel preparation of Ge nanocrystals embedded in SiO2 glasses

High-Light-Transmittance and Low-Haze Antifog MFI Zeolite Films Fabricated by Solvothermal Secondary Growth

Evolution from transparent SiO2 glass to ceramics enabled by cold sintering with a transient chemistry: H2SiO3

Realizing Translucency in Aluminosilicate Glass at Ultralow Temperature Via Cold Sintering Process

A novel low temperature vapor phase hydrolysis method for the production of nano-structured silica materials using silicon tetrachloride

Crystallization kinetics, structural and mechanical properties of transparent lithium aluminosilicate glass-ceramics

Achieving fabrication of highly transparent Y 2 O 3 ceramics via air pre‐sintering by deionization treatment of suspension

Ultra-low temperature preparation of mullite glass-ceramics with high transparency sintered from EMT-type zeolite

Room‐Temperature Molding of Complex‐Shaped Transparent Fused Silica Lenses

Critical role of water in fused silica glass by silica nanopowder sintering: Nanoparticle dispersion

Low-temperature Fusion Bonding of Aluminosilicate Glass Via Intermediate Water

Recovery of Chlorosilane Residual Liquid to Prepare Nano-Silica via the Reverse Micro-Emulsion Process

Fabrication of an optically transparent super-hydrophobic surface via embedding nano-silica

Low-cost fabrication of multicomponent silicate microspheres with tailored crystallization and morphology

Pressureless Crystallization of Glass for Transparent Nanoceramics

Synthesis of Nanosized NaY Molecular Sieve under Dynamic Hydrothermal Crystallization

Fabrication of Transparent LaAlO3/t-ZrO2 Nanoceramics Through Controlled Amorphous Crystallization

Transparent Silica Aerogels: Optical and Chemical Design, Controlled Synthesis, and Emerging Applications

Fabrication of the Monolithic Materials Via Novel Monocomponent Sol-Gel Process