Abstract:At present, the prediction of wear failure is often based on temperature, friction coefficient, vibration, and other single or a few macroscopic parameters to judge the contact condition of the friction pairs. However, there are still deviations between the measured results and the actual situation. In the digital twin system for studying friction and wear phenomena, in-situ measurement and characterization of topography of friction pairs is a challenge problem which does not exist in other procedural twin systems. This paper investigates the relationship between in-situ measured macroscopic parameters and topographical parameters. First, the dynamic relationship between friction coefficient and fractal parameters is derived from the view of a microscopic contact, and the wear periods are determined based on the dynamic changes of fractal parameters. The derived friction-fractal formula is based on mechanical deformation and the Majumdar and Bhushan rough surface contact model, avoiding the assumptions based on specific wear mechanisms, then having the universal property. Second, the experimental verification is carried on which demonstrates good correspondence between the obtained topographical parameters based on the friction-fractal formula with the experimental results. The obtained friction-fractal formula provides a theoretical basis for predicting and analyzing the wear status of friction pairs in the critical equipment and supports the real-time contact state characterization of the friction pairs in the digital twin system.

Study on surface wear of gate bottom pivot based on multi-notch measurement

An Efficient Numerical Model for Predicting the Torsional Fretting Wear Considering Real Rough Surface

The Quantitative Analysis of Surface Roughness in the Dry Friction

Topography Characterization of Friction Pairs During the Real-Time Wear Process in Dry Condition

Modification methodology of fretting wear in involute spline

Wear Characterization under Sliding–rolling Contact Using Friction-Induced Vibration Features

Optical interferential method for wear measurement

Discrimination of Wear Performance Based on Surface Roughness Parameters arithmetic mean height ( Sa ) and Skewness ( Ssk )

Simulation and experimental investigation on low wear rate surface contour of piston/cylinder pair in an axial piston pump

A Multiscale Accuracy Degradation Prediction Method of Planetary Roller Screw Mechanism Based on Fractal Theory Considering Thread Surface Roughness

In-situ Characterization of Three Dimensional Worn Surface under Sliding-Rolling Contact

Combined Effect of Boundary Layer Formation and Surface Smoothing on Friction and Wear Rate of Lubricated Point Contacts During Normal Running-in Processes

Assessment of Surface Wear Properties with Initial Macro Crack Defects Using On-Line Visual Ferrography and Sem Methods

Improving applied roughness measurement of involute helical gears

Experimental characterization of roughness parameters for fretting wear in spline couplings

Friction and Wear On-Line Monitoring and Wear Mechanism Analysis under Dynamic Loading Manners

Evaluation of fretting wear based on the frictional work and cyclic saturation concepts

Research Status of Wear Prediction of Spherical Friction Pair

Quantitative characterization of rubber three-body abrasion wear: multi-scale testing and analysis methods based on defect detection

Finite Element Simulation of Fretting Wear Behaviors under the Ball-on-flat Contact Configuration

Study of the surface generation mechanism and roughness distribution in internal spline shaping in consideration of tool wear