Abstract:Solid solutions of ceramic pigments of red shade have been synthesized based on YAlO3 perovskite structure doped with chromium by means of conventional synthesis; that is, the “ceramic route”. To optimize this synthesis, an emphasis has been made on the study of stoichiometry, calcination conditions and mineralizer incorporation. Various studies have demonstrated the high stability of perovskite structures, which ensures stable coloration at high temperatures. This is a highly important factor in the ceramic sector, given the scarcity of red glazes functional at temperatures close to those required of porcelain stoneware and their environmental constraints. Such a limitation makes it impossible in the European community to manufacture using toxic materials such as Se and Cd (cadmium sulfoselenide) that offer interesting colors at low temperatures. Pigments have been synthesized within the Y1−xCrxAlO3, YCrxAl1−xO3 and Y1−xAl1−yCrx+yO3 chromium-doped systems in molar ratios between n = 0.01 molar and n = 0.10 molar. The pigments obtained have been characterized by X-ray diffraction to identify the crystalline phases responsible for the shade; that is, the formation of the perovskite crystalline structure YAlO3 responsible for the red shade, together with lateral phases of garnet Y3Al5O12 of lower intensity. Visible ultraviolet spectrophotometry shows absorption bands corresponding to Cr(III) in octahedral position and the appearance of Cr(IV) in both octahedral and tetrahedral positions. The morphology of the samples was studied using a scanning electron microscope, obtaining information from the secondary and back scattered electrons. The viability of its use in ceramic glazes was verified after applying them mixed at 4% by weight in a glaze to an industrial porous single-firing cycle, collecting the L*a*b* chromatic coordinates using a visible ultraviolet spectrophotometer based on the CIE L*a*b* system, giving rise to red colorations.

Development of a yellow ceramic pigment based on silver nanoparticles

Au–Ag nanoparticles as red pigment in ceramic inks for digital decoration

Development of Red Ceramic Pigments with Perovskite Structure Prepared through a Traditional Route

Environmentally friendly YIn0.9Fe0.1O3-ZnO yellow pigment displaying near infra red (NIR) reflectance and photocatalytic activity

Synthesis of black ceramic pigments from secondary raw materials

Nano-silver induced ceramic coloring via control of glaze interface and phase separation

Acid Leaching-Based Synthesis of CdS Yellow Ceramic Pigment with Discarded Ni-Cd Batteries

Ceramic application of mica titania pearlescent pigments

Advances and challenges of ceramic pigments for inkjet printing

RESEARCH PROGRESS IN YELLOW PIGMENTS OF RARE EARTH

High near-infrared reflectance Bi<sub>2</sub>O<sub>3</sub>-ZnO-CaO yellow pigment system

Effective Synthesis of Green Nano‐sized Ceramic Pigments by Co‐doping Zn2+, Cr3+ and Sm3+ into the Cobalt‐aluminate

Green ceramic pigment based on chromium recovered from a plating waste

High Near-Infrared Reflectance Zn1-xMnxO Yellow Pigment Prepared and Properties by Co-Precipitation Method

Waste-Based Pigments for Application in Ceramic Glazes and Stoneware Bodies

Synthesis and characterization of black ceramic pigments by recycling of two hazardous wastes

Preparation of a Novel Yellow Ceramic Coating on Ti Alloys by Plasma Electrolytic Oxidation

Synthesis and Characterization of Zn1-xMnxO Yellow Pigment with High Near-Infrared Reflectance

Synthesis and characterization of novel yellow-green Al-doped Y3Fe5O12 nano-pigments with high NIR reflectance

A multi-size study of gold nanoparticle degradation and reformation in ceramic glazes

Twin-screw extrusion synthesis of low-cost cobalt ferrite ceramic pigments using natural mixed-dimensional palygorskite clay