Synthesis and characterization of black ceramic pigments by recycling of two hazardous wastes

Minxing Du,Yi Du,Zhongtao Chen,Zhongfu Li,Kai Yang,Xingjie Lv,Yibing Feng
DOI: https://doi.org/10.1007/s00339-017-1181-1
2017-08-09
Applied Physics A
Abstract:In this study, two different industrial wastes, namely vanadium tailing and leather sludge, were used as less expensive alternative raw materials for the synthesis of black ceramic pigments to be used in commercial glazes. The pigments were based on hematite structure (FexCr1-x)2O3 and prepared by the common solid-state reaction method, under optimal formulation and processing conditions. The synthesized pigments were characterized in typical ceramic glazes and ceramic tile bodies. Optimal color development was achieved when the Fe/Cr mole ratios were 2.0 with 40 wt% content of vanadium tailing at 1200 °C. The coloring properties were similar to those imparted by a commercial black pigment.
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to synthesize black ceramic pigments by recycling two industrial hazardous wastes - vanadium tailings and chromium - containing leather sludge, in order to achieve an environmentally - friendly and low - cost pigment preparation method. Specifically: 1. **Environmental problems**: If these two industrial wastes, vanadium tailings and chromium - containing leather sludge, are not properly disposed of, they will cause serious pollution to the environment and occupy a large amount of land resources. In particular, hexavalent chromium (Cr(VI)) is highly toxic and extremely harmful to human health. 2. **Waste of resources**: These industrial wastes contain a large number of useful components such as iron and chromium. Directly discarding them will cause a waste of resources. 3. **Cost problems of traditional pigments**: Traditional black ceramic pigments usually rely on high - priced cobalt - based materials, while the method proposed in this paper can use cheap industrial wastes as raw materials, thereby reducing production costs. Therefore, this research aims to develop a new method that can not only effectively treat the above two industrial wastes but also produce black ceramic pigments with excellent performance. In this way, it not only solves the environmental pollution problem but also realizes the reuse of resources and reduces the production cost. ### Key point summary: - **Raw material sources**: Vanadium tailings (rich in iron) and chromium - containing leather sludge (rich in chromium). - **Target product**: Black ceramic pigments based on the hematite structure (\((\text{Fe}_{x}\text{Cr}_{1 - x})_2\text{O}_3\)). - **Synthesis method**: Solid - phase reaction method. - **Optimization conditions**: The optimal Fe/Cr molar ratio is 2.0, the vanadium tailings content is 40 wt%, and the sintering temperature is 1200 °C. This new method not only contributes to environmental protection but also can produce new pigments with performance comparable to that of commercial black pigments.