Abstract:A common method for reducing waste and environmental problems brought on by landfills is to reuse waste, especially heavy metals such as iron. Automotive industrial waste containing Fe-rich metal is successfully transformed into a highly pure structure of Fe 2 O 3 using an etching method with HNO 3 acid. This resulting structure serves as a precursor for synthesizing LaNi 1-x Fe x O 3±δ perovskite conducting materials. The desired perovskite conductive phase can be produced by substituting Fe 2 O 3 -treated waste at the B-site (Ni position) before calcination at 1200 °C. However, LaNiO 3±δ and LaNi 0.6 Fe 0.4 O 3±δ could not be synthesized under ideal conditions, as indicated by XRD analysis using TOPAS software, which revealed the presence of undesirable phases. Both compounds, LaNiO 3±δ and LaNi 0.6 Fe 0.4 O 3±δ demonstrated electrical conductivity with values of 362 S/cm and 42 S/cm at 550 °C, respectively. Nonetheless, electrical conductivity of both compounds decreased due to unintended phase contamination during the synthesis process. The Fe 2 O 3 -substituted compounds at the Ni position, in an exact amount of 1 mol, exhibited minimal electrical conductivity. Although the synthesis conditions to produce a single phase of LaFeO 3±δ were identified, LaFeO 3±δ , despite its low electrical conductivity, is frequently used in electrical devices as a gas detection sensor. The thermal expansion coefficient of all synthesized waste samples is represented in the range of 12–13 × 10 −6 °C −1 , which is comparable to IT-SOFC electrolyte materials. Furthermore, microstructural investigation revealed that the introduction of Fe into LaNiO 3±δ reduced particle size and porosity, ultimately resulting in higher densities. These findings were confirmed through synchrotron radiation x-ray tomographic microscopy (SR-XTM) analysis. The research suggests that converting Fe-waste into a pure phase of Fe 2 O 3 using a strong acid etching technique can serve as a viable precursor for synthesizing conductive materials. This approach enhances the value of industrial waste while also reducing its volume.

Automotive industrial waste-based pigment synthesis for application in ceramic glaze systems

Synthesis and characterization of black ceramic pigments by recycling of two hazardous wastes

An overview of using solid wastes for pigment industry

Surface Modification of Pyrolytic Carbon Black from Waste Tires and Its Use As Pigment for Offset Printing Ink

Synthesis of black ceramic pigments from secondary raw materials

Waste Conversion into High-Value Ceramics: Carbothermal Nitridation Synthesis of Titanium Nitride Nanoparticles Using Automotive Shredder Waste.

Synthesis of zircon pigments from rice husk ash and their performance in ceramic glaze

Recycling of chromium wastes from the tanning industry to produce ceramic nanopigments

The effect of granulated lead–zinc slag on aesthetic and microstructural properties of single-fired wall tile glazes

Twin-screw extrusion synthesis of low-cost cobalt ferrite ceramic pigments using natural mixed-dimensional palygorskite clay

Sustainable Ceramic Glaze Development from Coal Power Plant Water Treatment Sludge: A Customer-Oriented Approach Using Delphi Method, QFD, and Mixture Design

Heat-Resistant Ceramic Pigments on the Base of Waste Vanadium Catalyst and Alumina

Synthesis and Characterization of Red Pigment from Acid Regeneration Plant (ARP) By-product Via Rod Milling Process

Application of Nanotechnology in Water-based Colorant

Sustainable reutilization of ion-adsorbed rare earth tailings: Preparation of low-cost functionalized pigments

Utilizing acid-etched Fe-waste for sustainable synthesis of conductive perovskite-type materials from automotive industrial residue

CaCO3-assisted mechanochemical synthesis of low-cost and high-chroma cobalt blue composite pigments using kaolin tailing sand for ceramic coloring

Designing of technological scheme for conversion of Cr-rich electroplating sludge into the black ceramic pigments of consistent composition, following the principles of circular economy

Synthesis of high-performance copper barium silicate composite pigment from waste iron ore tailings

Production of brown and black pigments by using flotation waste from copper slag

Studies of the Morphology of Hematite Synthesized from Waste Iron Sulfate