Abstract:Si anodes suffer from poor cycling efficiency because of the pulverization induced by volume expansion, lithium trapping in Li–Si alloys, and unfavorable interfacial side reactions with the electrolyte; the comprehensive consideration of the Si anode design is required for their practical deployment. In this article, we develop a cabbage-inspired graphite scaffold to accommodate the volume expansion of silicon particles in interplanar spacing. With further interfacial modification and prelithiation processing, the /C anode with an areal capacity of 4.4 mA h cm–2 delivers highly reversible cycling at 0.5 C (Coulombic efficiency of 99.9%) and a mitigated volume expansion of 23%. Furthermore, we scale up the synthetic strategy by producing 10 kg of the /C composite in the pilot line and pair this anode with a LiNi0.8Co0.1Mn0.1O2 cathode in a 1 A h pouch-type cell. The full-cell prototype realizes a robust cyclability over 500 cycles (88% capacity retention) and an energy density of 301.3 W h kg–1 at 0.5 C. Considering the scalable fabrication protocol, holistic electrode formulation design, and harmony integration of key metrics evaluated both in half-cell and full-cell tests, the reversible cycling of the prelithiated silicon species in the graphite scaffold of the composite could enable feasible use of the composite anode in high-energy density lithium batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12873?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12873</a>.FESEM image, AFM image, cross-sectional image, XRD patterns, TGA profiles, N2 adsorption–desorption isotherms and corresponding pore-size distribution curve and Raman spectra information of the composites, XPS spectrum, EIS, FESEM images of /C and Si/G/C electrodes before and after cycles, and electrochemical performance of the NCM cathode (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12873/suppl_file/am0c12873_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Over-lithiated NCM through Li5FeO4 for high energy silicon-based lithium-ion batteries

Elevating the Comprehensive Performance of Carbon-Based Hybrid Electrode Materials by Incorporating Nickel Silicate for Lithium-Ion Capacitors

Litchi-structural Core–shell Si@C for High-Performance Lithium–ion Battery Anodes

Facilitating prelithiation of silicon carbon anode by localized high‐concentration electrolyte for high‐rate and long‐cycle lithium storage

SiOx/C anodes with high initial coulombic efficiency through the synergy effect of pre-lithiation and fluoroethylene carbonate for lithium-ion batteries

The preparation of mass producible, highly-cycling stable Si/C anode materials with nano-sized silicon crystals embedded in highly amorphous silicon matrix

Improved Lithium Storage Capability of Si Anode by Ball-Milling Produced Graphitic Carbon Sheet and Fe3O4 Nanoparticles

High-performance Self-Organized Si Nanocomposite Anode for Lithium-Ion Batteries

Facile preparation of silicon/carbon composite with porous architecture for advanced lithium-ion battery anode

Encasing Prelithiated Silicon Species in the Graphite Scaffold: An Enabling Anode Design for the Highly Reversible, Energy-Dense Cell Model

Electrolyte Design Enabling a High‐Safety and High‐Performance Si Anode with a Tailored Electrode–Electrolyte Interphase

Synergistic Protecting-Etching Synthesis of Carbon Nanoboxes@Silicon for High-Capacity Lithium-Ion Battery.

Prelithiating Si-Based Anodes using Li-Excess Layered Positive Electrode Materials

Toward Promising Turnkey Solution for Next-Generation Lithium Ion Batteries: Scale Preparation, Fading Analysis, and Enhanced Performance of Microsized Si/C Composites

Addressing the initial lithium loss of lithium ion batteries by introducing pre-lithiation reagent Li5FeO4/C in the cathode side

Micro-porous carbon coated Si@FeCO 3 nanoflowers for high-performance lithium-ion batteries

Enhanced reversibility and cyclic stability of biomass-derived silicon/carbon anode material for lithium-ion battery

Preparation and Capacity-Fading Investigation of Polymer-Derived Silicon Carbonitride Anode for Lithium-Ion Battery

Industrial Silicon-Wafer-Wastage-Derived Carbon-Enfolded Si/Si-C/C Nanocomposite Anode Material through Plasma-Assisted Discharge Process for Rechargeable Li-Ion Storage

Controlled Prelithiation of Silicon Monoxide for High Performance Lithium-Ion Rechargeable Full Cells

N‐Containing Carbon‐Coated β‐Si3N4 Enhances Si Anodes for High‐Performance Li‐Ion Batteries