Abstract:Wet-processable and highly conductive polymers are promising candidates for key materials in organic electronics. Poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS), commercially available as a water dispersion of colloidal particles, has potential applications to organic electronics because of its high electrical conductivity, transparency and thermal stability 1) . However, the PEDOT:PSS has some technical issues owing to the PSS: The ultra-thin layers thinner than the colloidal particle size is difficult; The PEDOT:PSS colloids aggregate and precipitate when stored for an extended period; The pristine PEDOT:PSS exhibits poor electrical conductivity without secondary dopants such as ethylene glycol and DMSO. Recently, we have developed a novel fully soluble self-doped PEDOT (S-PEDOT) by chemical oxidative polymerization having a high conductivity without secondary dopants 2) . This presentation deals with the first study on synthesis of the S-PEDOT by a facile electrochemical polymerization and characterization by means of cyclic voltammetry (CV), reflection spectroscopy, X-ray diffraction analysis (XRD), and the four-point technique. The S-PEDOT was electrochemically synthesized at different current densities ranging from 0.5 to 5 mA/cm 2 . It was found that the electrical conductivity increased with increasing current density and attained as high as 427 S/cm at 5 mA/cm 2 which was one order of magnitude higher than those so far reported in the literature. Further investigation has been made to clarify the role and effect of current density on molecular weight, crystallinity, and carrier transport properties in more detail. For the application to biosensors, flexible organic electronic circuits consisting of working, counter, and reference electrodes were fabricated by line-patterning 3) the S-PEDOT water solution as a conductive ink on a Kapton film as a flexible substrate. The flexible glucose sensor was then fabricated by coating the bioink containing glucose oxidase, ferrocene, and chitosan on the working electrode. It was found that the flexible biosensor successfully worked where the electric current during the CV measurement increased with increasing the glucose concentration. 1) H. Okuzaki ed., PEDOT: Materials Properties and Device Applications, S&T (2012). 2) H. Yano, K. Kudo, K. Marumo, H. Okuzaki, Sci. Adv., 5, eaav9492 (2019). 3) D. Hohnholz, H. Okuzaki, and A. G. MacDiarmid, Adv. Funct. Mater., 15, 51 (2005).

Flexible Multifunctional Sensors Using 3-D-Printed PEDOT:PSS Composites

Flexible Pressure Sensor with Micro-Structure Arrays Based on PDMS and PEDOT:PSS/PUD&CNTs Composite Film with 3D Printing

PEDOT:PSS: From conductive polymers to sensors

Electrochemical Synthesis of Self-Doped Poly(3,4-ethylenedioxythiophene) and Application to Flexible Biosensors

A stretchable and printable PEDOT:PSS/PDMS composite conductors and its application to wearable strain sensor

2D/3D-printed PEDOT/PSS conductive hydrogel for biomedical sensors

High-Performance Flexible Piezoresistive Pressure Sensor Printed with 3D Microstructures

Coagulation Bath‐Assisted 3D Printing of PEDOT:PSS with High Resolution and Strong Substrate Adhesion for Bioelectronic Devices

3D-printed stretchable sensor based on double network PHI/PEDOT:PSS hydrogel annealed with cosolvent of H 2 O and DMSO

Fabrication of high sensitivity and stable strain sensors based on composite folded structures via embedded 3D printing

A stretchable flexible strain sensor with high sensitivity and fast response fabricated by embedded 3D printing of the hybrid polydimethylsiloxane/conductive carbon paste composites

3D-Printable Carbon Nanotubes-Based Composite for Flexible Piezoresistive Sensors

A flexible piezoresistive pressure sensor comprising a microstructure printed with poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) copolymers@graphene hybrid ink

All Digital Light Processing‐3D Printing of Flexible Sensor

Application of PEDOT:PSS and Its Composites in Electrochemical and Electronic Chemosensors

Low viscosity and highly flexible stereolithographic 3D printing resins for flexible sensors

Characterization of PEDOT:PSS Nanofilms Printed via Electrically Assisted Direct Ink Deposition with Ultrasonic Vibrations

Deep Eutectic Solvent Induced Porous Conductive Composite for Fully Printed Piezoresistive Pressure Sensor

Highly conductive film of PEDOT:PSS treated with cosolvent of formamide and methanol for flexible piezoresistive sensor applications

A flexible pressure sensor based on PEDOT coated polyester nonwoven fabric for low-pressure range

Lightweight, Elastic and Conductive Pure PEDOT:PSS Foam for Dual-Mode Sensing