Abstract:Wet-processable and highly conductive polymers are promising candidates for key materials in organic electronics. Poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS), commercially available as a water dispersion of colloidal particles, has potential applications to organic electronics because of its high electrical conductivity, transparency and thermal stability 1) . However, the PEDOT:PSS has some technical issues owing to the PSS: The ultra-thin layers thinner than the colloidal particle size is difficult; The PEDOT:PSS colloids aggregate and precipitate when stored for an extended period; The pristine PEDOT:PSS exhibits poor electrical conductivity without secondary dopants such as ethylene glycol and DMSO. Recently, we have developed a novel fully soluble self-doped PEDOT (S-PEDOT) by chemical oxidative polymerization having a high conductivity without secondary dopants 2) . This presentation deals with the first study on synthesis of the S-PEDOT by a facile electrochemical polymerization and characterization by means of cyclic voltammetry (CV), reflection spectroscopy, X-ray diffraction analysis (XRD), and the four-point technique. The S-PEDOT was electrochemically synthesized at different current densities ranging from 0.5 to 5 mA/cm 2 . It was found that the electrical conductivity increased with increasing current density and attained as high as 427 S/cm at 5 mA/cm 2 which was one order of magnitude higher than those so far reported in the literature. Further investigation has been made to clarify the role and effect of current density on molecular weight, crystallinity, and carrier transport properties in more detail. For the application to biosensors, flexible organic electronic circuits consisting of working, counter, and reference electrodes were fabricated by line-patterning 3) the S-PEDOT water solution as a conductive ink on a Kapton film as a flexible substrate. The flexible glucose sensor was then fabricated by coating the bioink containing glucose oxidase, ferrocene, and chitosan on the working electrode. It was found that the flexible biosensor successfully worked where the electric current during the CV measurement increased with increasing the glucose concentration. 1) H. Okuzaki ed., PEDOT: Materials Properties and Device Applications, S&T (2012). 2) H. Yano, K. Kudo, K. Marumo, H. Okuzaki, Sci. Adv., 5, eaav9492 (2019). 3) D. Hohnholz, H. Okuzaki, and A. G. MacDiarmid, Adv. Funct. Mater., 15, 51 (2005).

Lightweight, Elastic and Conductive Pure PEDOT:PSS Foam for Dual-Mode Sensing

Synergy of Organic/Inorganic and Inner/Outer Cooperative Conductive Networks in Polydimethylsiloxane-Based Porous Foam on High-Performance Flexible Sensors

PEDOT:PSS: From conductive polymers to sensors

Flexible PEDOT:PSS/polyimide aerogels with linearly responsive and stable properties for piezoresistive sensor applications

Electrochemical Synthesis of Self-Doped Poly(3,4-ethylenedioxythiophene) and Application to Flexible Biosensors

Flexible Multifunctional Sensors Using 3-D-Printed PEDOT:PSS Composites

Structurally tunable conductive wood sponge incorporated with PEDOT: PSS for enhanced piezoresistive sensor applications

Preparation of Highly Conductive Flexible Polyurethane Elastomers with Low PEDOT:PSS Content Based on a Novel Pore Collapse Strategy

Highly Stretchable and Aqueous Solution-Stable Poly(3,4-ethylenedioxythiophene) Doped with Elastomeric Sulfonated-SEBS

PSS with a Porous Structure

Highly Conductive PEDOT:PSS Aerogels

The Electrical and Mechanical Characteristics of Conductive PVA/PEDOT:PSS Hydrogel Foams for Soft Strain Sensors

A low-hysteresis, self-adhesive and conductive PAA / PEDOT: PSS hydrogel enabled body-conformable electronics

Breathing-effect Assisted Transferring Large-Area PEDOT:PSS to PDMS Substrate with Robust Adhesion for Stable Flexible Pressure Sensor

Highly Conductive, Ultrastrong, and Flexible Wet-Spun PEDOT:PSS/Ionic Liquid Fibers for Wearable Electronics

Integrated temperature and pressure dual-mode sensors based on elastic PDMS foams decorated with thermoelectric PEDOT:PSS and carbon nanotubes for human energy harvesting and electronic-skin

Ultrahigh-Conductivity Polymer Hydrogels with Arbitrary Structures.

Preparation of Flexible Highly Conductive Polyurethane Elastomers with Low PEDOT:PSS Content Based on Novel Feasible Pore Collapse Strategy for Flexible Conductor

Electrical Conductivity, Thermo-Mechanical Properties, and Cytotoxicity of Poly(3,4-Ethylenedioxythiophene):Poly(Styrene Sulfonate) (PEDOT:PSS)/Sulfonated Polyurethane Blends

Design of Highly Conductive, Intrinsically Stretchable, and 3D Printable PEDOT:PSS Hydrogels via PSS-Chain Engineering for Bioelectronics

A stretchable and printable PEDOT:PSS/PDMS composite conductors and its application to wearable strain sensor