Abstract:CO2 sequestration via mineralization of steel slag has received widespread attention due to its ability to achieve in-situ CO2 sequestration in steel industries and high-value utilization of steel slag. The final CO2 sequestration capacity of steel slag is closely related to the reaction parameters (i.e., reaction duration, reaction temperature, CO2vol concentration, and liquid-solid ratios) of mineralization. The reaction parameters may have synergistic effects on the ability of steel slag to sequestrate CO2. Therefore, the single-factor (one-factor-at-a-time) experimental strategy can't obtain optimal process parameters. Herein, response surface methodology and the Box-Behnken Design were employed in determining optimal conditions. It is found that the combined effects of CO2 concentration in combination with reaction temperature and liquid-solid ratio significantly influence the sequestration process (P = 0.0082 and P < 0.0001, respectively). Conversely, the combined effects of reaction duration with liquid-solid ratio and CO2 concentration were found to be less significant (P = 0.6905 and P = 0.6114, respectively). The reasons behind this observation can be ascribed to the focus of this research on the later stages of the reaction, during which it proceeds smoothly. Additionally, alterations in temperature, liquid-solid ratio, and CO2 concentration not only affect the initial pH, CO2 dissolution rate and quantity, and reaction kinetics but also alter the patterns of their collective impact on CO2 sequestration. The CO2 capture could reach 179.1 g-CO2/kg-steel slag at the optimal condition (i.e., 56.14 °C reaction temperature, 6.66 ml/g liquid-solid ratio, 44.53 wt.% CO2 concentration, and 286.73 mins reaction time), compared to single-factor stepwise optimization, which improves by about 9.84 %. Implementing this optimized mineralization process could enable the Chinese steel industry to capture an estimated 27.4 million tons of CO2 annually, based on an annual production of 153 million tons of steel slag.

A Novel Approach for Comprehensive Utilization by Leaching Pyrite Cinder with Titanium Dioxide Waste Acid by Response Surface Methodology

Evaluation of electro-oxidation of biologically treated landfill leachate using response surface methodology

Hydrothermal preparation of high purity TiO2 from industrial metatitanic acid by response surface methodology

Landfill Leachate Pretreatment by Coagulation–flocculation Process Using Iron-Based Coagulants: Optimization by Response Surface Methodology

Efficient recovery of Ti, Fe and Mn based on the synergistic effect of acidic titanium dioxide wastewater and pyrolusite

Leaching of Heavy Metals from MSWI Fly Ash: Experiments Vs. Simulation

Modeling and response surface methodology optimization of reaction parameters for aqueous mineral carbonation by steel slag

Optimization of fenton and electro-fenton oxidation of biologically treated coking wastewater using response surface methodology

A Novel Surface Passivation Method of Pyrite within Rocks in Underwater Environments to Mitigate Acid Mine Drainage at Its Source

Optimization of two-step bioleaching of spent petroleum refinery catalyst by Acidithiobacillus thiooxidans using response surface methodology

Optimize the Preparation of Novel Pyrite Tailings Based Non-sintered Ceramsite by Plackett-Burman Design Combined With Response Surface Method for Phosphorus Removal

Ti/RuO2-IrO2 anodic electrochemical oxidation composting leachate biochemical effluent: Response surface optimization and failure mechanism

A Novel Approach for Separation and Recovery of Titanium, Scandium, Iron from Acidic Wastewater and Red Gypsum Utilization

Optimization of Spent Radioactive Resins Degradation by Fenton‐like Oxidation Using Response Surface Methodology

A Stepwise Processing Strategy for Treating Highly Acidic Wastewater and Comprehensive Utilization of the Products Derived from Different Treating Steps.

Mechanism and kinetics study on waste acid leaching from copper smelting dust

Optimization of wet air oxidation of cationic red X-GRL wastewater by response surface methodology

Comprehensive Resource Treatment of Titanium White Waste Acid by Chlorination Method Based on Mechanical Separation Method

Transforming Mining Waste to Wealth: A Novel Process for the Sustainable Recovery and Utilization of Iron Tailings through HCl Leaching and MOFs Absorption

Removal of SO2 from Smelting Flue Gas by Using Copper Tailings with MnSO4: Factors Optimization by Response Surface Methodology

Pre-treatment of landfill leachate via coagulation-flocculation: Optimization of process parameters using response surface methodology (RSM)