Abstract:In this study, the finite element and smoothed-particle hydrodynamics adaptive method was used to reproduce experiments on honeycomb sandwich shields impacted by spherical projectiles at hypervelocities, which can provide phenomena that are difficult to observe experimentally. The simulation results clearly reproduced the formation, development, and stabilization processes of the debris cloud as well as the damage and response processes of the honeycomb sandwich shield. The petal-shaped multicellular internal structure of the debris cloud was proposed by combining the formation and development of the debris cloud with its experimentally observed morphology. The damage and response processes of the honeycomb sandwich shield can be divided into two stages, namely, the crushing and inertial motion stages, to elaborate the varying failure modes of the honeycomb sandwich shield in different stages. The crushing stage represents the response of the material, whose failure modes include penetration, bending, buckling, tensile fracture, and compression failure. The inertial motion stage represents the structural response (bending and buckling of foils), which, at different positions, leads to folding and compaction of the honeycomb core layer by layer along the radial direction. The factors influencing the channeling effect were investigated, and the influences of the projectile diameter and impact position on the channeling effect and protection performance of the honeycomb sandwich shield were analyzed. The envelope analysis method for damage areas, which can predict the damage to the honeycomb core and rear plate at any impact position using an envelope diagram, was proposed. It was shown that the foil at different positions works by blocking or partitioning, which seriously affects the channeling effect. This study provides new ideas for optimizing the design of Whipple shields.

A Review of Whipple Shield Ballistic Limit Equations

Mechanisms of failure of aluminium-based Whipple shields under hypervelocity impact: insights from continuum simulations

Numerical Study on the Perforation of Steel Plates by Multiple Projectiles

Advances in the Whipple Shield Design and Development:

Analyzing Micrometeoroid and Orbital Debris Shield Performance for Sample Return Spacecraft

Analysis of Electromagnetic Scattering Characteristics for a HTV-2 Type Flight Vehicle Ablation Flows

Research and development on hypervelocity impact protection using Whipple shield: An overview

Analysis of Weakly Ionized Ablation Plasma Flows for a Hypersonic Vehicle

Numerical Simulation of Weakly Ionized Dynamic Plasma for Reentry Vehicles

Numerical Analyses of Electromagnetic Forces on the ITER Blanket Module Shield Block During Major Disruptions

Lethality assessment of multiple electromagnetically projectile radiators under oblique incidences

Design and evaluation of additively manufactured polyetherimide orbital debris shielding for spacecraft

Numerical study on debris cloud and channeling effect of honeycomb sandwich shields under hypervelocity impact

Influence of the impedance gradient on the debris cloud produced by hypervelocity impact

Integrated Deflector Shield Technology for Spacecraft

Assessment of M/OD Failure Risk for Manned Spacecraft and Its Shield Design

Hypervelocity Heat Protection- A Review of Laboratory Experiments

Flow Mechanics in Ablative Thermal Protection Systems

Characteristics of ejecta resulting from hypervelocity impact on Al/Mg explosive welding clad materials

A Material Point Method Model and Ballistic Limit Equation for Hyper Velocity Impact of Multi-Layer Fabric Coated Aluminum Plate

Numerical simulation of high-speed penetration-perforation dynamics in layered armor shields