Abstract:In this study, the finite element and smoothed-particle hydrodynamics adaptive method was used to reproduce experiments on honeycomb sandwich shields impacted by spherical projectiles at hypervelocities, which can provide phenomena that are difficult to observe experimentally. The simulation results clearly reproduced the formation, development, and stabilization processes of the debris cloud as well as the damage and response processes of the honeycomb sandwich shield. The petal-shaped multicellular internal structure of the debris cloud was proposed by combining the formation and development of the debris cloud with its experimentally observed morphology. The damage and response processes of the honeycomb sandwich shield can be divided into two stages, namely, the crushing and inertial motion stages, to elaborate the varying failure modes of the honeycomb sandwich shield in different stages. The crushing stage represents the response of the material, whose failure modes include penetration, bending, buckling, tensile fracture, and compression failure. The inertial motion stage represents the structural response (bending and buckling of foils), which, at different positions, leads to folding and compaction of the honeycomb core layer by layer along the radial direction. The factors influencing the channeling effect were investigated, and the influences of the projectile diameter and impact position on the channeling effect and protection performance of the honeycomb sandwich shield were analyzed. The envelope analysis method for damage areas, which can predict the damage to the honeycomb core and rear plate at any impact position using an envelope diagram, was proposed. It was shown that the foil at different positions works by blocking or partitioning, which seriously affects the channeling effect. This study provides new ideas for optimizing the design of Whipple shields.

Influence of the impedance gradient on the debris cloud produced by hypervelocity impact

Numerical Study on the Perforation of Steel Plates by Multiple Projectiles

Damage Characteristics of Aluminum Nanorod under Hypervelocity Impact

Research and development on hypervelocity impact protection using Whipple shield: An overview

Analysis on the fragmentation pattern of sphere hypervelocity impacting on thin plate

Penetration of Disk Fragments Following Impact on Thin Plate

Numerical simulation of the disk fragment impacting resistance of plate target

Numerical study on debris cloud and channeling effect of honeycomb sandwich shields under hypervelocity impact

Analysis of the stress wave and rarefaction wave produced by hypervelocity impact of sphere onto thin plate

Mechanisms of failure of aluminium-based Whipple shields under hypervelocity impact: insights from continuum simulations

Study on damage mechanism and damage distribution of the rear plate under impact of debris cloud

Protection performance of aluminum matrix ceramic ball composite materials plate for hypervelocity impact based on FE-SPH adaptive method

Failure evolution in hypervelocity impact of Al spheres onto thin Al plates

Three-dimensional Characterization of Debris Clouds under Hypervelocity Impact with Pulsed Digital Inline Holography.

Characteristics of ejecta resulting from hypervelocity impact on Al/Mg explosive welding clad materials

Numerical study on the phase-transition characteristics of debris cloud under hypervelocity impacts

Review on hypervelocity impact of advanced space debris protection shields

Numerical simulation of the process of Zr58Nb3Cu12Ni12Al15 bulk glasses fragment penetrating into two separated plates and forming debris cloud

Predicting the Damage on a Target Plate Produced by Hypervelocity Impact Using a Decoupled Finite Particle Method

Numerical Simulation Study on Impact Initiation on Shielded Charge Using Hypervelocity Composite-Structure Reactive Fragments

Experimental, numerical and analytical study on the shock wave propagation through impedance-graded multi-metallic systems