Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. Joints used in the automotive industry are widely manufactured by forging. A cold upsetting process can provide burr-free forging which reduces economic loss by preventing material waste. In this study, finite element simulations for the upsetting of a torque rod joint made of 41Cr4 steel are performed. The novelty of the present study lies in the fact that the upsetting performance is investigated through simulation having hardening model in order to replace the existing forging process. The performance of hardening models is studied for an accurate simulation and optimum parameters are determined. A combination of the bilinear isotropic hardening rule and Chaboche's nonlinear kinematic hardening rule is employed with the associated flow rule and Hill48 yield criterion to set up a plasticity model of the upsetting process for the first time. The parameters of the bilinear isotropic hardening rule are determined from monotonic tensile tests. The Chaboche's parameters are determined by using hysteresis loops obtained from strain-controlled low-cycle fatigue tests. The parameters of both rules are combined. Furthermore, they are calibrated using inverse analysis based on the optimization method. Genetic algorithm is used for optimization. The experimental diameter and height measurements of the joint are compared with those obtained from the optimized model. The results show that the application of the combined hardening rule provides better prediction performance of the upset dimensions with minimum dimensional tolerance. The calibrated parameters are presented for the upsetting process. The calibrated parameters of the combined hardening model for the upsetting are YS = 446.64 MPa, TM = 3363.05 MPa, C1 = 452.31 MPa, γ1 = 55.165, C2 = 212.13 MPa, γ2 = 12.24, C3 = 194.191 MPa, γ3 = 10.00 where [math] are hardening models' parameters. Absolute percent true error (APE) is 0.19%. The parameters are YS = 1.93 MPa, TM = 6.98 MPa, C1 = 580.79 MPa, γ1 = 1.08, C2 = 597.23 MPa, γ2 = 0.98, C3 = 565.05 MPa, γ3 = 2.87 in the case of cyclic load. APE is 1.66%. Also upsetting force requirement and material flow path are presented. The forging process can be replaced by the burr-free upsetting process with necessary changes in the die and press bench design. This replacement will save the 128-gr material per each one of the torque rod joint part.

Calibrating the combined hardening rule parameters for burr-free forging simulation of the torque rod joint

Parameter Calibration of a Novel Combined Hardening Model for a Wire Drawing Simulation of AA7075-T6

A novel combined hardening rule for the brass cartridge case using crimping simulation and optimization

Quantification of static softening process and its effects on work hardening characteristics of a typical high strength steel during multi-pass deformation

A Novel Method for Determining Friction in Cold Forging of Complex Parts Using a Steady Combined Forward and Backward Extrusion Test

A modified Johnson-Cook model to determine plastic flow behavior of Fe-30Mn-9Al-0.8 C low-density steel during warm multiaxial forging

Characterization of kinematic and distortional hardening by cyclic twin-bridge shear tests for sheet metal with inverse engineering approach

Billet Optimization for Steering Knuckle Using Taguchi Methodology

Deformation behavior of advanced high strength steel with different strain hardening exponents during tube hydroforging

Predictive Modeling and Optimization of Hot Forging Parameters for AISI 1045 Ball Joints Using Taguchi Methodology and Finite Element Analysis

Effect of shearing on production stability and die life in automatic multi-stage cold forging of an automobile wheel nut

Finite element simulation of isothermal forging of complex component using constitutive relationship of 7A04 alloy

Modeling and Numerical Simulation Research on Hollow Steel Ingot Forging Process of Heavy Cylinder Forging

Cylindrical Billet Size Optimization for Hot Closed-Die Forging of the Upper Ball Joint

Physical and Numerical Simulations of Closed Die Hot Forging and Heat Treatment of Forged Parts

A Case-Based Reasoning System Combining Expert Knowledge for Automated Design of Multi-Pass Hot Forging for Hub Bearings

Calibration of Chaboche Combined Hardening Model for Large Strain Range

Parameter optimization in hot precision forging process of synchronizer ring based on grey relational analysis and response surface method

Multi-objective optimization of concave radial forging process parameters based on response surface methodology and genetic algorithm

Numerical Modeling and Anvil Design of High-Speed Forging Process for Railway Axles

Numerical simulation of upset-bending forging for heavy crankshaft