Abstract:Diagram of hydrogen bond interactions between Pebax® 1657 and SSMMP‐20%‐[bmim][Tf2N] filler. Mixed matrix membranes (MMMs) have been proposed as a solution to surmount Robeson's trade‐off curves and have demonstrated efficacy in gas separation processes, particularly for CO2 capture. In this study, MMMs based on Pebax®1657 were obtained utilizing synthetic silico‐metallic mineral particles (SSMMP) functionalized with ionic liquids (ILs). The objective was to attain enhanced CO2 separation performance, thereby showcasing the potential to mitigate the environmental repercussions of industrial processes that entail greenhouse gas emissions. For membrane production, an ethanol/water mixture was used as solvent, with the SSMMP/IL content varying from 0.5 to 20% by weight of the polymer. The primary aim of this study was to assess the effect of filler addition on permeability and selectivity for CO2, CH4, and N2. Comprehensive analyses, including SEM, FTIR, TGA, DSC, and DMA were conducted to evaluate the properties of the produced membranes. Gas permeability and ideal selectivity were measured at 25°C and different pressures, ranging from 1 to 7 bar. Characterization results demonstrate that the glass transition temperature (Tg) of MMMs increased compared to pure Pebax®1657, indicating that the addition of SSMMP/IL reduces the flexibility of the PEO chains, forming a rigid interface at the polymer/filler, which may enhance selectivity. This effect, corroborated by gas permeation, was observed for both CO2/N2 and CO2/CH4. For CO2/N2, the highest selectivity was achieved at lower filler concentrations, gradually decreasing as the filler load increased. MMM‐0.5 wt% achieved the highest selectivity of 91.96. The membrane CO2 permeability rose with an elevated filler content, rising from 84.21 for pure Pebax®1657 to 192.17 Barrer for MMM‐20 wt% at 4 bar. The permeability results were influenced by the gas diffusion coefficients of the MMMs, which increased with increasing SSMMP/IL content. The effect of feed pressure on MMM‐5 wt% was also assessed, revealing that CO2 permeability increased with increasing pressure, from 126.72 Barrer at 1 bar to 165.56 Barrer at 7 bar. This work showcased the viability of MMMs incorporating SSMMP/IL for industrial use, as they displayed separation capabilities that exceeded the 2008 Robeson upper bound. Highlights Mixed matrix membranes based on Pebax®1657 and SSMMP‐20%‐[bmim][Tf2N] were prepared. CO2 permeability of the MMMs was increased by 128% and CO2/N2 selectivity by 83%. Higher CO2 pressures increase MMMs permeability. The obtained MMMs have separation performances above the Robeson upper Bound.

Improving the CO 2 permeability and selectivity of Pebax mixed-matrix membranes by constructing an "expressway" using pyrazine-based nitrogen-doped porous carbon with nitrogen-containing groups and meso-microporous structure

Pebax-based mixed matrix membranes derived from microporous carbon nanospheres for permeable and selective CO<sub>2</sub> separation

Pebax-derived Ultra-Microporous Carbon Molecular Sieve Composite Membrane Assisted by Organic Interlayer for Gas Separation

Pebax‐based Mixed Matrix Membranes Loaded with Graphene Oxide/core Shell ZIF‐8@ZIF‐67 Nanocomposites Improved CO2 Permeability and Selectivity

Preparation of Pebax 1657/MAF-7 Mixed Matrix Membranes with Enhanced CO2/N2 Separation by Active Site of Triazole Ligand

Enhancing CO2/N2 and CO2/CH4 separation in mixed matrix membrane: A comprehensive study on Pebax®1657 with SSMMP/IL for improved efficiency

Increasing the Permeability of Carbon Dioxide and Nitrogen Gases Through a Polymer Membrane Consisting of a Modified Polyether Block Amide and Experimental Design

Pebax/Peg Grafted Cnt Hybrid Membranes For Enhanced Co2/N-2 Separation

Building high-speed facilitated transport channels in Pebax membranes with montmorillonite for efficient CO2/N2 separation

ZIF-8 nanoparticles with tunable size for enhanced CO2 capture of Pebax based MMMs

Enhanced CO2 Selectivity of Mixed Matrix Membranes with Carbonized Zn/Co Zeolitic Imidazolate Frameworks

Advanced mixed matrix membranes of Pebax embedded with amino acid ionic liquids@PIM core-shell composite nanoparticles for CO2 separation

Pebax/two-dimensional MFI nanosheets mixed-matrix membranes for enhanced CO2 separation

Boosting CO2 Transport of Poly (ethylene Oxide) Membranes by Hollow Rubik-like “expressway” Channels with Anion Pillared Hybrid Ultramicroporous Materials

Pebax/NC-PCL membrane containing well-distributed PCL grafted biodegradable nano-chitosan particles for CO 2 separation

Vesicles-Shaped Mof-Based Mixed Matrix Membranes With Intensified Interfacial Affinity And Co2 Transport Freeway

PEO-based mixed matrix membranes containing N-doped microporous carbon microparticles for enhanced CO2/N2 separation

Enhanced gas separation performance of Pebax mixed matrix membranes by incorporating ZIF-8 in situ inserted by multiwalled carbon nanotubes

Mixed Matrix Membranes (mmms) with Amine-Functionalized ZIF-L for Enhanced CO2 Separation Performance

Improved CO2/N2 separation performance of Pebax composite membrane containing polyethyleneimine functionalized ZIF-8

Constructing multi-dimensional transport pathways by mixed-dimensional fillers in membranes for efficient CO 2 separation