Abstract:Efficient heat transfer in PHEs relies on optimizing flow distribution to minimize thermal dead zones. Existing studies have predominantly focused on single-phase fluids as working media and employed density-based methods for structural optimization of microchannel heat exchangers at small scales. In this study, the Brinkman term from the porous media flow model is introduced in an innovative manner, along with the utilization of a material density interpolation model, which builds upon the density-based approach. A novel two-phase fluid topology optimization method is proposed, specifically tailored for large-scale PHE operating conditions, resulting in the successful design of a new PHE topology. To compare the performance of the two heat exchangers, finite element simulation, visualization experiments, and thermodynamic performance testing are conducted. The simulation results reveal that the heat transfer capacity of the topological PHE is 810 W with pressure drops of 18.8 kPa, while the dimple PHE exhibits heat transfer capacity of 652 W with pressure drops of 25.9 kPa. Compared to the dimple PHE, the topological PHE demonstrates 24.2 % improvement in heat transfer performance and 27.8 % reduction in pressure drop. The dimensionless comprehensive heat transfer coefficient (j/f) indicates that the overall performance of the topological PHE significantly surpasses that of the traditional PHE. Furthermore, the visualization experiment results demonstrate that the complex texture structure of the topological PHE effectively induces fluid motion, compelling the fluid to flow along the texture direction. This significantly mitigates the issue of uneven flow within the PHE, thus enhancing heat transfer efficiency. Specifically, the topological PHE exhibits inlet-outlet temperature difference of 10.3 degrees C and pressure drops of 11.2 kPa, while the dimple PHE shows inlet-outlet temperature difference of 6 degrees C and pressure drops of 12.9 kPa. The findings of this study provide guidance for future research endeavors aimed at evaluating potential solutions to advance heat transfer in PHEs and facilitate the implementation of thermal management strategies.

Evaluation of plate heat exchangers comprising sections with different chevron angle arrangements

Segmented Design of Performance Enhancement for Large Plate Fin Heat Exchanger of Cryogenic Air Separation Unit

Thermal Design of Large Plate-Fin Heat Exchanger for Cryogenic Air Separation Unit Based on Multiple Dynamic Equilibriums

Study on the effect of three key geometric parameters of chevron corrugated brazed plate heat exchanger on the heat transfer performance

Flow Boiling in Dimpled Plate Heat Exchangers with Different Geometric Parameters: Analysis of Asymmetric Channels

A numerical and experimental study of chevron, corrugated-plate heat exchangers

Effect of Inlet Flow Maldistribution on the Passage Arrangement Design of Multi-Stream Plate-Fin Heat Exchanger

Investigation of heat transfer and pressure drop characteristics in metal-foam filled channels in a plate heat exchanger: A comparative experimental study

Numerical and experimental studies of flow and heat transfer characteristics in a plate heat exchanger with multi-chevron corrugate furrows

Flow and Heat Transfer Simulation Analysis of 3D Compact Heat Exchanger

Numerical Simulation and Thermodynamic Test Analysis of Plate Heat Exchanger Based on Topology Optimization

Experimental investigation of two-phase flow in Chevron-type compact plate heat exchangers: A Study on pressure drops and flow regimes visualization

Analysis Exploring The Uniformity Of Flow Distribution In Multi-Channels For The Application Of Printed Circuit Heat Exchangers

A simplified LMTD approach to assess the effectiveness of a chevron-type plate heat exchanger

Study on the Characteristics of Channel Flow in Plate Heat Exchanger

Analysis of Flow and Heat Transfer Performance of Primary Surface Heat Exchanger for Aeroengine

A PGSELU-DENN and CMDMO based heat transfer enhancement in Mylar plate heat exchanger

Augmentation of Plate-Fin Heat Exchanger Performance with Support of Various Types of Fin Configurations

Investigation on Flow Maldistribution and Thermo-Hydraulic Performance of PCHEs with Spoiler Perforated Boards

Analysis of Plate Heat Exchangers in Binary Flashing Cycle Using Low-Temperature Heat Source

Experimental Study of the Flow and Heat Transfer Performance of a PCHE with Rhombic Fin Channels