Abstract:New thermoplastic polyether- and polycarbonate-based segmented polyurethanes were synthesized by a catalyzed one-step melt polyaddition from diphenyl sulfide-derivative diol, i.e., 2,2′-[sulfanediylbis(benzene-1,4-diyloxy)]diethanol as a nonconventional chain extender, 1,1′-methanediylbis(4-isocyanatocyclohexane), and 40, 50, and 60 mol% poly(hexane-1,6-diyl carbonate) diol (PHCD) of M¯n=860g/mol$$\overline{M}_{\text{n}} = 8 60 \;{\text{g}}/{\text{mol}}$$ or poly(oxytetramethylene) diol (PTMO) of M¯n=1000g/mol$$\overline{M}_{\text{n}} = 1000 {\text{g}}/{\text{mol}}$$ as soft segments. The structures and thermal properties of the polymers were examined by FTIR, elemental analysis, differential scanning calorimetry, thermogravimetry (TG), and TG-FTIR. Moreover, their Shore A/D hardness, tensile, physicochemical, adhesive, and optical properties were determined. The obtained colorless, transparent, amorphous materials exhibited elastomeric or plastic properties. The PTMO-based polymers showed lower glass-transition temperatures than those based on PHCD (from −29 to 5 °C vs. from 11 to 43 °C) as well as a higher degree of microphase separation. On the other hand, the polymers with the polycarbonate soft segments revealed better transparency (transmittance at 800 nm: 84–89% vs. 75–82%), higher tensile strength (up to 48.6 MPa vs. up to 28.3 MPa), and hardness in comparison with those with the polyether soft segments. The polymers decomposed in two (in helium) or three (in air) stages and possessed a relatively good thermal stability. Their temperatures of 1% mass loss were contained within the range of 255–274 °C. In inert atmosphere, the values shown by polymers from PTMO were higher than those from PHCD, whereas in oxidative atmosphere, the situation was reversed. The newly synthesized sulfur-containing polymers showed a higher refractive index and adhesive strength to copper than analogous polymers based on butane-1,4-diol as a chain extender.

Polycarbonate-based thermoplastic polyurethane elastomers modified by DMPA

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

The Structure and Dynamic Properties of Thermoplastic Polyurethane Elastomer/Hindered Phenol Hybrids

Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

Mechanical properties of thermoplastic polyurethanes containing aliphatic polycarbonate soft segments with different chemical structures

Poly(ethylene 2,5-Furandicarboxylate-mb-poly(tetramethylene Glycol)) Multiblock Copolymers: from High Tough Thermoplastics to Elastomers

Copolymerization approach of soft segment towards the adhesion improvement of polycarbonate-based thermoplastic polyurethane

Transparent sulfur-containing thermoplastic polyurethanes with polyether and polycarbonate soft segments

Regulating the structure of thermoplastic polyurethane elastomers with a diol chain extender to strength performance

Influence of the Type of Soft Segment on the Selected Properties of Polyurethane Materials for Biomedical Applications

Enhanced polyurethanes based on different polycarbonatediols

Thermoplastic polyurethanes derived from petrochemical or renewable resources: A comprehensive review

Synthesis and Characterization of Crystallizable Aliphatic Thermoplastic Poly(ester Urethane) Elastomers Through a Non-Isocyanate Route

Structural and Viscoelastic Properties of Thermoplastic Polyurethanes Containing Mixed Soft Segments with Potential Application as Pressure Sensitive Adhesives

Study on Properties and Preparation of Thermoplastic Polyurethane Hot-Melt Adhesive

Tuning the Properties of Bio-based Thermoplastic Polyurethane Derived from Polylactic Acid by Varying Chain Extenders and Hard Segment Contents

Synthesis and properties of high performance thermoplastic polycarbonate polyurethane elastomers through a non-isocyanate route

Thermoplastic polyurethane with good mechanical and processing performances via blocking and deblocking of isocyanates

Self-Healable, Strong, and Tough Polyurethane Elastomer Enabled by Carbamate-Containing Chain Extenders Derived from Ethyl Carbonate

Thermoplastic polyurethane pressure sensitive adhesives made with mixtures of polypropylene glycols of different molecular weights

Synthesis of novel polycarbonate‐based thermoplastic polyurethane elastomers compatibilizers with octadecyl side chains and their application in PC / PP blends