Preparation of mercurous sulfate reference electrode and its analytical application on penicillins

Liu Wei
Abstract:OBJECTIVE To design and make the mercurous sulfate electrode and measure the related parameters of the electrode,and to study its application on analysis of the penicillins.METHOD With the reagent of mercurous sulfate and the pure mercury,the electrode was made by using polypropylene plastic as the electrode body.The feasibility of the electrode on analysis of the penicillins was validated through determining Piperacillin and Mezlocillin by the mercury nitrate titration.RESULTS It was found that the electrode potential of the electrode had Nernst response with Hg 2+,and Nernst equation was obeyed over the range 2.0×10 -6~5.3×10 -5mol·L -1 of Hg 2+.The detection limit was 8.97×10 -7 mol·L -1.The average response slope was 37.0,and the applicable pH range was 2.8~9.0. The temperature coefficient measured was -1.39,and the absolute value of the electrode potential presented a direct ratio with temperature.The response time was less than 18 sec. 0.05 ml of 0.02 mol· L -1 of mercury nitrate could caused the potential change over 55 mV.The end point of petentiometry related to Hg 2+ was easy judged.The standard electrode potential of the electrode measured was consisted with reported.It was also observed that the term of validity was over 5 years.The samples of Benzylpenicillin , Phenoxymethylpenicillin, Oxacillin, Amoxicillin, Ampicillin, Procaine Benzylpenicillin, Piperacillin, Cloxacillin and Mezlocillin were determined by the potentiometric titration. It was found that the results of the determinations by the titration had no significant difference (P0.05) with the original methods,but the result of the determination for Piperacillin was higher than that of the HPLC.CONCLUSION The mercurous sulfate electrode showed a perfect response with Hg 2+ and obey Nernst equation can over a wide range of pH.It can be used as the reference electrode on analysis of the penicillins by the mercury nitrate titration potentiometrically.
Chemistry,Medicine
What problem does this paper attempt to address?