Abstract:In order to improve the thermal conductivity of W composites as plasma-facing materials, the interface bonding and interfacial thermal resistance of the composites are the key issues to be solved. Based on our previous study, although Si coating on diamond surface can improve the interface bonding and thermal conductivity of the composite, there still existed the interfacial reaction between W and diamond, which produced more low thermal conductivity compounds (WC/W 2 C) and added the interfacial thermal resistance of the composites. To further improve the interface bonding and increased the thermal conductivity of diamond/W composites, the Si-coated diamonds were used to prepare the Si-SiC dual layer on diamond via vacuum heat treatment and then to fabricate diamond/W composites (HT-coated diamond/W composite). The effects of temperature and holding time of the heat treatment on coating and its interface bonding with the composites were investigated by scanning electron microscopy, X-ray diffraction and transmission electron microscopy. The results showed that a stable and dense Si-SiC-diamond structure was formed after heat treatment at 1200 °C for 1 h, and the thickness of SiC transition layer was about 20 nm. Thermodynamic analysis demonstrated the reaction rate of SiC increased gradually first and then sharply from 1000 °C to 1400 °C. The integrity of the coating on the diamond surface was strongly impacted by residual compressive stress of the SiC layer, and its value increased with the SiC thickness. The Si-SiC dual layer evidently improved the interface bonding and thermal conductivity of diamond/W composite under the combined influence of reaction diffusion at SiC-W interface, inter-diffusion at W-Si interface, and the orientation relationship at diamond-SiC interface. Theoretical thermal analysis proved that HT-coated diamond/W composite possessing lower interface thermal resistance than that of Si-coated diamond/W composite and raw diamond/W composite achieved higher thermal conductivity of 205 W m −1 K −1 .

The improvement in heat transfer performance of single crystal silicon carbide with diamond film

Growth of 2-inch diamond films on 4H–SiC substrate by microwave plasma CVD for enhanced thermal performance

Synthesizing SiC layer on diamond by heat treatment and its effects on density and thermal conductivity of diamond/W composite

Preparation and Interfacial Microstructure of High Thermal Conductivity Diamond/sic Composites

PREPARATION OF SiC-B4C COMPOSITE FILM AND ITS MECHANICAL AND THERMOELECTRIC PROPERTIES

Microstructure evolution and thermal conductivity of diamond/SiC composites after heat treatment

Effect of Si-coated diamond on the relative density and thermal conductivity of diamond/W composites prepared by SPS

Thermal Boundary Conductance Enhancement of the Si/Diamond Interface via Atomic Transition Strategy

Structural and thermal analysis of polycrystalline diamond thin film grown on GaN-on-SiC with an interlayer of 20 nm PECVD-SiN

Fabrication and characterization of highly thermal conductive Si3N4/diamond composite materials

Preparation of bimodal-diamond/SiC composite with high thermal conductivity

Interfacial Reaction Boosts Thermal Conductance of Room‐Temperature Integrated Semiconductor Interfaces Stable up to 1100 °C

MPCVD diamond-SiC composite stacks for enhanced thermal performance: a concise review

Interfacial reaction boosts thermal conductance of room-temperature integrated semiconductor interfaces stable up to 1100 C

A numerical study of the effect of interfacial thermal resistance on thermal conductivity of Cu-B/diamond composites

Interfacial Characterization and Thermal Conductivity of Diamond/Cu Composites Prepared by Liquid-Solid Separation Technique

Realizing ultrahigh thermal conductivity in bimodal-diamond/Al composites via interface engineering

Quantitative control of interfacial structure and thermal conductivity between diamond and copper via thermal diffusion of alloying element

Research on maximizing the diamond content of diamond/SiC composite

Effects of Diamond on the Mechanical Properties and Thermal Conductivity of Si3N4 Composites Fabricated Using Spark Plasma Sintering

Improved Bending Strength and Thermal Conductivity of Diamond/Al Composites with Ti Coating Fabricated by Liquid–Solid Separation Method