Abstract:High consumption of acids and reductants is usually required when spent lithium-ion batteries are recycled using a hydrometallurgy route. The overstoichiometric chemicals end up as pollutants that have to be further treated. Low chemical and energy consumption have attracted considerable attention to achieve sustainability of a recycling process. In this research, LiFePO4 was used as a reductant and induced crystallization was performed for the removal of Fe and P. More importantly, we demonstrate that it is possible to achieve additional reductant-free and near-to-stoichiometric acidic recovery of spent ternary lithium-ion batteries (NCMs) by introducing FePO4·2H2O seed crystals and using waste LiFePO4. High efficiencies (>96%) of critical metals including Ni, Co, Mn, and Li are achieved, while iron phosphate remains as a solid product. Then, the leaching solution can be further used for the Ni–Co–Mn hydroxide precursor and lithium carbonate preparation. In addition, the mechanisms were subsequently investigated by combining thermodynamics analysis and systematic characterizations. This entire recycling process can be a highly economic, closed-loop alternative for recovering valuable metals from spent lithium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c08163?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c08163</a>.Detailed results of different parameters on synergistic leaching; reuse of leaching residues as seed crystals; leaching efficiencies of different types of NCM cathode wastes; SEM micrographs of the Ni–Co–Mn hydroxide precursor and leaching residues at different times (0.5–4 h); mass fraction of Li2CO3 precipitation and FePO4·2(H2O) residues; and thermodynamic data and equilibrium equations relative to the E–pH diagram of the Li–Fe–P–H2O system (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c08163/suppl_file/sc0c08163_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Recovery of metal ions in lithium iron phosphate powder and lithium nickel-cobalt-manganate powder by electrochemical oxidation

Recovery of lithium iron phosphate batteries through electrochemical oxidation in Na2CO3 solutions

All-element recovery and regeneration of mixed LiNixCoyMn1- x- yO2/LiFePO4 cathode materials by synergistic redox processes

A Facile Route for the Efficient Leaching, Recovery, and Regeneration of Lithium and Iron from Waste Lithium Iron Phosphate Cathode Materials

Study on selective recovery of lithium ions from lithium iron phosphate powder by electrochemical method

Hydrometallurgical recovery of lithium carbonate and iron phosphate from blended cathode materials of spent lithium-ion battery

A Sustainable Closed-Loop Process of Oxidation Leaching and Regeneration for Lithium Iron Phosphate Materials from Spent Batteries

Selective leaching process for efficient and rapid recycling of spent lithium iron phosphate batteries

Innovative Electrochemical Strategy to Recovery of Cathode and Efficient Lithium Leaching from Spent Lithium-Ion Batteries

A sustainable closed-loop method of selective oxidation leaching and regeneration for lithium iron phosphate cathode materials from spent batteries

All-Component Recycling and Reuse Process for Spent LiFePO4 Cathodes

A Green and Effective Room-Temperature Recycling Process of LiFePO4 Cathode Materials for Lithium-Ion Batteries.

Lithium recycling and cathode material regeneration from acid leach liquor of spent lithium-ion battery via facile co-extraction and co-precipitation processes

Study on Metal Recovery Process and Kinetics of Oxidative Leaching from Spent LiFePO4 Li-batteries

A Fe(III)-driven Strategy for Efficient Closed-Loop Recovery of Critical Metals from Spent LiNixCoyMnzO2 Powder

Near-to-Stoichiometric Acidic Recovery of Spent Lithium-Ion Batteries through Induced Crystallization

A mild closed-loop process for lithium–iron separation and cathode materials regeneration from spent LiFePO 4 batteries

A Clean and Sustainable Method for Recycling of Lithium from Spent Lithium Iron Phosphate Battery Powder by Using Formic Acid and Oxygen.

A Mild Closed-Loop Process for Lithium–iron Separation and Cathode Materials Regeneration from Spent LiFePO4 Batteries

Leaching Mechanisms of Recycling Valuable Metals from Spent Lithium-Ion Batteries by a Malonic Acid-Based Leaching System

Selective recovery of Li and FePO4 from spent LiFePO4 cathode scraps by organic acids and the properties of the regenerated LiFePO4