Tensegrity metamaterials for soft robotics

Li Wen,Fei Pan,Xilun Ding

DOI: https://doi.org/10.1126/scirobotics.abd9158

IF: 25

2020-08-26

Science Robotics

Abstract:3D-printed flexible tensegrities with metamaterial properties enable customizable complex locomotion in soft robots.

robotics

What problem does this paper attempt to address?

Novel Dielectric Elastomer Structure of Soft Robot

Chi Li,Yuhan Xie,Xiaoqiang Huang,Junjie Liu,Yongbin Jin,Tiefeng Li

DOI: https://doi.org/10.1117/12.2084015

2015-01-01

Abstract:Inspired from the natural invertebrates like worms and starfish, we propose a novel elastomeric smart structure. The smart structure can function as a soft robot. The soft robot is made from a flexible elastomer as the body and driven by dielectric elastomer as the muscle. Finite element simulations based on nonlinear field theory are conducted to investigate the working condition of the structure, and guide the design of the smart structure. The effects of the pre-stretch, structural stiffness and voltage on the performance of the smart structure are investigated. This work can guide the design of soft robot.
Fabrication and Modeling of Dielectric Elastomer Soft Actuator with 3D Printed Thermoplastic Frame

Fanghao Zhou,Mingqi Zhang,Xunuo Cao,Zhen Zhang,Xiangping Chen,Youhua Xjao,Yiming Liang,Tuck-Whye Wong,Tiefeng Li,Zhongbin Xu

DOI: https://doi.org/10.1016/j.sna.2019.02.017

2019-01-01

Abstract:In this paper, we develop the novel approach to design and fabricate dielectric elastomer (DE) actuator integrating with 3D printed flexible structures, demonstrating large deformation and multi-functionalities. This technique facilitates the combination of complex soft structures fused on the DE membrane without any extra adhesive. Based on the DE actuator, a soft gripper has been fabricated and characterized in terms of bending angle and blocked force. Finite element method (FEM) simulations precisely predict the electromechanical behaviors, guiding the design of the soft actuator. With optimal design, the finger-like soft actuator can generate large actuation with the bending angle about of 128 degrees. This study can guide the fabrication and modeling of highly designable and customized DE actuators, which are promising in the applications of soft robotics, flexible electronics, and medical devices. (C) 2019 Elsevier B.V. All rights reserved.
Programming Soft Robots with Flexible Mechanical Metamaterials

Ahmad Rafsanjani,Katia Bertoldi,André R. Studart

DOI: https://doi.org/10.48550/arXiv.1906.00306

2019-06-01

Soft Condensed Matter

Abstract:The complex behavior of highly deformable mechanical metamaterials can substantially enhance the performance of soft robots.
Programmable soft bending actuators with auxetic metamaterials

Qi Pan,ShiTong Chen,FeiFei Chen,XiangYang Zhu

DOI: https://doi.org/10.1007/s11431-020-1741-2

2020-11-09

Science China Technological Sciences

Abstract:Soft robotics has been receiving increasing attention due to its flexibility and adaptability offered by embodied intelligence. A soft robot may undergo complex motions including stretching, contraction, bending, twisting, and their intricate combinations. Among these basic motions, bending plays a central role when a robot accomplishes tasks such as locomotion, grasping and manipulation. Although a rich repertoire of bending mechanisms has been reported, a systematic and rational design framework is still lack. In this paper, we provide a novel design strategy for soft bending actuators which allows integral modeling and design optimization. Nowadays, metamaterials are emerging as a new tool for soft robots, by encoding the desired complex motions directly within the material architectures, leading to conformable monolithic systems. We combine pneumatic actuators and flexible metamaterials to provide an alternative solution to soft bending actuators, with advantages of compact design, large bending motion, and convenient fabrication. A regular pneumatic chamber is embedded inside auxetic and non-auxetic metamaterials, and bending is generated when inflated. We carry out dimensionless analysis to identify the key design variables. To provide insight into design optimization, we develop a computation framework by modeling metamaterial structures with beam elements and the inner chamber with shell elements as an integral part, allowing efficient simulation of the coupled system. We systematically investigate how the bending angle varies with the key design variables and find the optimal design parameters. The experimental results are well in line with the simulation, and a remarkable bending motion of 0.437mm is achieved.

materials science, multidisciplinary,engineering
Tensegrity Robotics

Dylan S. Shah,Joran W. Booth,Robert L. Baines,Kun Wang,Massimo Vespignani,Kostas Bekris,Rebecca Kramer-Bottiglio

DOI: https://doi.org/10.1089/soro.2020.0170

IF: 7.784

2021-10-27

Soft Robotics

Abstract:Numerous recent advances in robotics have been inspired by the biological principle of tensile integrity-or "tensegrity"-to achieve remarkable feats of dexterity and resilience. Tensegrity robots contain compliant networks of rigid struts and soft cables, allowing them to change their shape by adjusting their internal tension. Local rigidity along the struts provides support to carry electronics and scientific payloads, while global compliance enabled by the flexible interconnections of struts and cables allows a tensegrity to distribute impacts and prevent damage. Numerous techniques have been proposed for designing and simulating tensegrity robots, giving rise to a wide range of locomotion modes, including rolling, vibrating, hopping, and crawling. In this study, we review progress in the burgeoning field of tensegrity robotics, highlighting several emerging challenges, including automated design, state sensing, and kinodynamic motion planning.

robotics
Bio-inspired Tensegrity Soft Modular Robots

D. Zappetti,S. Mintchev,J. Shintake,D. Floreano

DOI: https://doi.org/10.48550/arXiv.1703.10139

2017-08-23

Abstract:In this paper, we introduce a design principle to develop novel soft modular robots based on tensegrity structures and inspired by the cytoskeleton of living cells. We describe a novel strategy to realize tensegrity structures using planar manufacturing techniques, such as 3D printing. We use this strategy to develop icosahedron tensegrity structures with programmable variable stiffness that can deform in a three-dimensional space. We also describe a tendon-driven contraction mechanism to actively control the deformation of the tensegrity mod-ules. Finally, we validate the approach in a modular locomotory worm as a proof of concept.

Robotics
Advanced Artificial Muscle for Flexible Material-Based Reconfigurable Soft Robots.

Zhongdong Jiao,Chao Zhang,Wei Wang,Min Pan,Huayong Yang,Jun Zou

DOI: https://doi.org/10.1002/advs.201901371

2019-01-01

Abstract:Flexible material-based soft robots are widely used in various areas. In many situations, the suitable soft robots should be rapidly fabricated to complete the urgent tasks (such as rescue), so the facile fabricating methods of the multifunctional soft robots are still in urgent needs. In this work, the origami structure is employed to design vacuum-powered silicone rubber artificial muscles, which can perform multiple motions, including contraction, bending, twisting, and radial motions. Artificial muscles can be used for rapid reconfiguration of different soft robots, just like the "building bricks". Based on these artificial muscles, four soft robots with different functions, including an omnidirectional quadruped robot, a flexible gripper, a flexible wrist, and a pipe-climbing robot, are reconfigured to complete different tasks. The proposed origami artificial muscles offer a facile and rapid fabricating method of flexible material-based soft robots, and also greatly improve the utilization rate of flexible materials.
Programmable and Resilient Metamaterials with Anisotropic and Non-Linear Mechanical Responses Composed Exclusively of Stiff Constituents.

Hongyi Yao,Xiaoyu Zhao,Kaiwen Shi,Wei Sun,Shengli Mi

DOI: https://doi.org/10.1039/d4mh00628c

IF: 13.3

2024-01-01

Materials Horizons

Abstract:Recently, significant progress has been made in the field of flexible bulk metamaterials composed of soft and elastic materials, unlocking the potential for achieving programmable non-linear mechanical responses, such as shape morphing, energy absorption, and information processing. However, the majority of these metamaterials utilize expensive hyperelastic materials and require complex fabrication processes. Additionally, constructing eco-friendly stiff constituents for these metamaterials remains challenging due to their limited elastic limit strains (<0.1). Here, we propose a systematic design strategy by combining curved beams with chiral metastructures to generate a family of three-dimensional programmable resilient mechanical metamaterials without relying on flexible or hyperelastic constituents. These tiled metamaterials demonstrate robust, anisotropic and non-linear resilience under large elastic compression strains (>0.75), while exhibiting a programmable effective modulus reduction of nearly 6 orders of magnitude compared to the native stiff components. Furthermore, leveraging their stable resilience under high-frequency stimuli, we successfully developed a meter-scale soft robot capable of traversing complex narrow scenarios on demand without the need for flexible materials or sophisticated pipelines. We anticipate that these mechanical metamaterials could serve as a universal platform for programmable active dampers, modular flexible robots, and medical rehabilitation equipment at various scales.
Design and printing of proprioceptive three-dimensional architected robotic metamaterials

Huachen Cui,Desheng Yao,Ryan Hensleigh,Haotian Lu,Ariel Calderon,Zhenpeng Xu,Sheyda Davaria,Zhen Wang,Patrick Mercier,Pablo Tarazaga,Xiaoyu (Rayne) Zheng

DOI: https://doi.org/10.1126/science.abn0090

IF: 56.9

2022-06-17

Science

Abstract:Advances in additive manufacturing techniques have enabled the creation of stimuli-responsive materials with designed three-dimensional (3D) architectures. Unlike biological systems in which functions such as sensing, actuation, and control are closely integrated, few architected materials have comparable system complexity. We report a design and manufacturing route to create a class of robotic metamaterials capable of motion with multiple degrees of freedom, amplification of strain in a prescribed direction in response to an electric field (and vice versa), and thus, programmed motions with self-sensing and feedback control. These robotic metamaterials consist of networks of piezoelectric, conductive, and structural elements interwoven into a designed 3D lattice. The resulting architected materials function as proprioceptive microrobots that actively sense and move.

multidisciplinary sciences
Modeling and Design of Lattice-Reinforced Pneumatic Soft Robots

Dong Wang,Chengru Jiang,Guoying Gu

DOI: https://doi.org/10.1109/tro.2023.3334629

IF: 7.8

2023-12-20

IEEE Transactions on Robotics

Abstract:Lattice metamaterials exhibit diverse functions and complex spatial deformations by rational structural design. Here, lattice metamaterials are exploited to design pneumatic soft robots with programmable bending, twisting, and elongation deformations. The system comprises an elastomeric tube reinforced by lattice metamaterials. We develop an analytical framework to model the twisting, bending, and elongation finite deformation taking into account the geometric orthotropy and nonlinear elasticity. We experimentally validate our modeling approach and investigate the effects of geometric patterns and input loading on the soft actuators' deformation. Theoretical guided design of lateral-climbing soft robots and exploration soft manipulators are demonstrated. The soft actuator could exhibit a combined twisting–bending–elongation deformation by lattice superimposition. The proposed structural design method paves the way for designing soft robots with complex and dexterous deformations.

robotics
Superflexible Carbon Nanofibers for Multidimensional Complex Deformation Sensing in Soft Robots

Xiangqi Liu,Kunle Li,Dihu Chen,Aixiang Wei,Yu Zhao,Zhoujun Pang

DOI: https://doi.org/10.1021/acsami.4c13537

IF: 9.5

2024-11-02

ACS Applied Materials & Interfaces

Abstract:Soft robots can make complex motions or deformations due to their infinite freedom, which poses great challenges for monitoring their motion and position. While previous investigations of flexible sensing either focused on stretchable or compression deformations in one or two directions, the complex multidimensional deformations that occur on the surfaces of soft robots have been frequently overlooked. In this work, inspired by spider silk, superflexible carbon nanofibers with a bundled...

materials science, multidisciplinary,nanoscience & nanotechnology
Bioinspired Continuum Robots with Programmable Stiffness by Harnessing Phase Change Materials (Adv. Mater. Technol. 6/2023)

Jie Zhang,Bo Wang,Haohan Chen,Jianing Bai,Zhigang Wu,Ji Liu,Haijun Peng,Jianing Wu

DOI: https://doi.org/10.1002/admt.202370028

IF: 6.8

2023-03-26

Advanced Materials Technologies

Abstract:Bioinspired Continuum Robots In article number 2201616, Ji Liu, Haijun Peng, Jianing Wu, and co‐workers present a three‐segment continuum robot constructed by a class‐3 tensegrity structure, inspired by the mechanism of an elephant trunk for regulating local stiffness. It relies on a stiffness tunable material to achieve the robotic stiffness programmable characteristics. This study may provide a foundation for the potential application of continuum robots for interacting with unstructured environments.

materials science, multidisciplinary
Evolutionary Co-Design of Morphology and Control of Soft Tensegrity Modular Robots with Programmable Stiffness

Davide Zappetti,Jean Marc Bejjani,Dario Floreano

DOI: https://doi.org/10.48550/arXiv.2101.11772

2021-01-28

Abstract:Tensegrity structures are lightweight, can undergo large deformations, and have outstanding robustness capabilities. These unique properties inspired roboticists to investigate their use. However, the morphological design, control, assembly, and actuation of tensegrity robots are still difficult tasks. Moreover, the stiffness of tensegrity robots is still an underestimated design parameter. In this article, we propose to use easy to assemble, actuated tensegrity modules and body-brain co-evolution to design soft tensegrity modular robots. Moreover, we prove the importance of tensegrity robots stiffness showing how the evolution suggests a different morphology, control, and locomotion strategy according to the modules stiffness.

Robotics
HEDRA: A Bio-Inspired Modular Tensegrity Soft Robot With Polyhedral Parallel Modules

Vishal Ramadoss,Keerthi Sagar,Mohamed Sadiq Ikbal,Jesus Hiram Lugo Calles,Matteo Zoppi

DOI: https://doi.org/10.1109/RoboSoft54090.2022.9762130

2020-11-29

Abstract:There is a surge of research interest in the field of tensegrity robotics. Robots developed under this paradigm provide many advantages and have distinguishing features in terms of structural compliance, dexterity, safety, and weight reduction. This paper proposes a new robotic mechanism based on tensegrity ('tension-integrity') robots and reconfigurable modular robots. The specific actuation schemes for this tensegrity robot with multiple degrees of freedom are presented. This article describes an easy-to-assemble 350 mm tensegrity based robot prototype by stacking a series of rigid struts linked with tensegrity joints that have no direct rigid contact with each other. The functionality of the proposed robot is validated by the experimental results by integrating the polyhedral parallel structure as its skeleton and series of tensegrity joints. The proposed manipulator is capable of reaching bending angles up to 76 degrees. An adaptive cable driven underactuated robotic gripper is designed and attached to the tensegrity manipulator for grasping objects in different shapes, weights, and sizes.

Robotics
Bioinspired Continuum Robots with Programmable Stiffness by Harnessing Phase Change Materials

Jie Zhang,Bo Wang,Haohan Chen,Jianing Bai,Zhigang Wu,Ji Liu,Haijun Peng,Jianing Wu

DOI: https://doi.org/10.1002/admt.202201616

IF: 6.8

2023-02-04

Advanced Materials Technologies

Abstract:Inspired by the mechanism of an elephant trunk for regulating local stiffness, a three‐segment continuum robot constructed by a class‐3 tensegrity structure is proposed, which relies on a stiffness tunable material to achieve the robotic stiffness programmable characteristics. This study may provide a foundation for the potential application of continuum robots for interacting with unstructured environments. Continuum robots offer significant advantages over traditional ones in some specific scenarios, such as urban search and rescue, minimally invasive surgery, and inspection of cluttered environments. However, motions and/or operations of existing continuum robots always suffer from those limitations in varying curvature interaction scenarios because of the homogeneity and singleness of the structural stiffness. Herein, inspired by the mechanism of an elephant trunk for regulating local stiffness, a three‐segment continuum robot constructed by tensegrity structure, which relies on a stiffness tunable material, with its Young's modulus switchable between 1.79 and 271.62 MPa to achieve the robotic stiffness programmable characteristics, is proposed. For predicting the robotic configuration with varying stiffness distribution, a mechanical model based on the framework of the finite element method is derived. Theoretical predictions reveal that the curvature of each segment can be regulated by programming stiffness of the smart materials; therefore, the customizable design can offer an effective route for real‐time robotic interactions. By evaluating motion characteristics, stiffness performance, and conformal interaction capability, the experimental results demonstrate that the robot can freely regulate the configuration on‐demand, which may provide a foundation for the application of continuum robots with programmable stiffness for interacting with unstructured environments.

materials science, multidisciplinary
Bridging Hard and Soft: Mechanical Metamaterials Enable Rigid Torque Transmission in Soft Robots

Molly Carton,Jakub F. Kowalewski,Jiani Guo,Jacob F. Alpert,Aman Garg,Daniel Revier,Jeffrey Ian Lipton

2024-12-04

Abstract:Torque and continuous rotation are fundamental methods of actuation and manipulation in rigid robots. Soft robot arms use soft materials and structures to mimic the passive compliance of biological arms that bend and extend. This use of compliance prevents soft arms from continuously transmitting and exerting torques to interact with their environment. Here, we show how relying on patterning structures instead of inherent material properties allows soft robotic arms to remain compliant while continuously transmitting torque to their environment. We demonstrate a soft robotic arm made from a pair of mechanical metamaterials that act as compliant constant-velocity joints. The joints are up to 52 times stiffer in torsion than bending and can bend up to 45°. This robot arm can continuously transmit torque while deforming in all other directions. The arm's mechanical design achieves high motion repeatability (0.4 mm and 0.1°) when tracking trajectories. We then trained a neural network to learn the inverse kinematics, enabling us to program the arm to complete tasks that are challenging for existing soft robots such as installing light bulbs, fastening bolts, and turning valves. The arm's passive compliance makes it safe around humans and provides a source of mechanical intelligence, enabling it to adapt to misalignment when manipulating objects. This work will bridge the gap between hard and soft robotics with applications in human assistance, warehouse automation, and extreme environments.

Robotics
Soft Adaptive Mechanical Metamaterials

Romik Khajehtourian,Dennis M. Kochmann

DOI: https://doi.org/10.3389/frobt.2021.673478

2021-05-03

Frontiers in Robotics and AI

Abstract:Soft materials are inherently flexible and make suitable candidates for soft robots intended for specific tasks that would otherwise not be achievable (e.g., smart grips capable of picking up objects without prior knowledge of their stiffness). Moreover, soft robots exploit the mechanics of their fundamental building blocks and aim to provide targeted functionality without the use of electronics or wiring. Despite recent progress, locomotion in soft robotics applications has remained a relatively young field with open challenges yet to overcome. Justly, harnessing structural instabilities and utilizing bistable actuators have gained importance as a solution. This report focuses on substrate-free reconfigurable structures composed of multistable unit cells with a nonconvex strain energy potential, which can exhibit structural transitions and produce strongly nonlinear transition waves. The energy released during the transition, if sufficient, balances the dissipation and kinetic energy of the system and forms a wave front that travels through the structure to effect its permanent or reversible reconfiguration. We exploit a triangular unit cell’s design space and provide general guidelines for unit cell selection. Using a continuum description, we predict and map the resulting structure’s behavior for various geometric and material properties. The structural motion created by these strongly nonlinear metamaterials has potential applications in propulsion in soft robotics, morphing surfaces, reconfigurable devices, mechanical logic, and controlled energy absorption.
A Multimodal Self‐Propelling Tensegrity Structure

Changyue Liu,Kai Li,Xinzi Yu,Jiping Yang,Zhijian Wang

DOI: https://doi.org/10.1002/adma.202314093

IF: 29.4

2024-04-03

Advanced Materials

Abstract:Tensegrity structure is composed of tensile cables and compressive rods, offering high stiffness‐to‐mass ratio, deploy ability and excellent energy damping capability. The active and dynamic tensegrity designs demonstrate great potential for soft robots. In previous designs, the movement relied on carefully controlled input power or manually controlled light irradiation, limiting their potential applications. In this work, a hybrid tensegrity structure (HTS) is constructed by integrating thermally responsive cables, non‐responsive cables and stiff rods. The HTS can self‐propel continuously on a hot surface due to its unique geometry. The HTS allows for the easy achievement of multimodal self‐propelled locomotive modes, which has been challenging for previously demonstrated self‐propelling structures. Additionally, using Velcro tapes to adhere the rods and cables together, a modulable and re‐assemblable HTS is created. The HTS introduced in this study presents a new strategy and offers a large design space for constructing self‐propelling and modulable robots. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Design and locomotion control of soft robot using friction manipulation and motor-tendon actuation

Vishesh Vikas,Eliad Cohen,Rob Grassi,Canberk Sozer,Barry Trimmer

DOI: https://doi.org/10.48550/arXiv.1509.06693

2016-05-13

Abstract:Robots built from soft materials can alter their shape and size in a particular profile. This shape-changing ability could be extremely helpful for rescue robots and those operating in unknown terrains and environments. In changing shape, soft materials also store and release elastic energy, a feature that can be exploited for effective robot movement. However, design and control of these moving soft robots are non-trivial. The research presents design methodology for a 3D-printed, motor-tendon actuated soft robot capable of locomotion. In addition to shape change, the robot uses friction manipulation mechanisms to effect locomotion. The motor-tendon actuators comprise of nylon tendons embedded inside the soft body structure along a given path with one end fixed on the body and the other attached to a motor. These actuators directly control the deformation of the soft body which influences the robot locomotion behavior. Static stress analysis is used as a tool for designing the shape of the paths of these tendons embedded inside the body. The research also presents a novel model-free learning-based control approach for soft robots which interact with the environment at discrete contact points. This approach involves discretization of factors dominating robot-environment interactions as states, learning of the results as robot transitions between these robot states and evaluation of desired periodic state control sequences optimizing a cost function corresponding to a locomotion task (rotation or translation). The clever discretization allows the framework to exist in robot's task space, hence, facilitating calculation of control sequences without modeling the actuator, body material or details of the friction mechanisms. The flexibility of the framework is experimentally explored by applying it to robots with different friction mechanisms and different shapes of tendon paths.

Robotics
Novel 4D-printed multi-stable metamaterials: programmability of force-displacement behaviour and deformation sequence

Mengqi Wan,Keqin Yu,Hao Zeng,Akbar A Khatibi,Meigui Yin,Huiyu Sun

DOI: https://doi.org/10.1098/rsta.2023.0366

2024-09-09

Abstract:The unique properties of metamaterials are determined by the configuration and spatial arrangement of artificially designed unit structures. However, the configuration and mechanical properties of conventional metamaterials are challenging to reverse and adjust. Based on curved beams, two types of novel three-dimensional (3D) multi-stable metamaterials with reconfigurable deformation and tunable mechanical properties are designed and fabricated using a four-dimensional (4D) printing method. The effects of temperature and curved-beam thickness on the force-displacement curves and multi-stable snapping sequence of the 3D multi-stable metamaterials are investigated by finite-element analysis (FEA) and experiments. In addition, based on the designed four-branch multi-stable metamaterials, three- and six-branched multi-stable structures are designed by changing the number of curved-beam branches. It is shown that, owing to shape memory effects, the 3D multi-stable metamaterials can realize mechanical programmability, and the multi-stable deformation sequence can be precisely regulated by varying the temperature and curved-beam thickness. These 4D-printed multi-stable metamaterials provide valuable contributions to the design of programmable multi-stable metamaterials and their applications in soft robots and intelligent structures. This article is part of the theme issue 'Current developments in elastic and acoustic metamaterials science (Part 1)'.

Tensegrity metamaterials for soft robotics

Novel Dielectric Elastomer Structure of Soft Robot

Fabrication and Modeling of Dielectric Elastomer Soft Actuator with 3D Printed Thermoplastic Frame

Programming Soft Robots with Flexible Mechanical Metamaterials

Programmable soft bending actuators with auxetic metamaterials

Tensegrity Robotics

Bio-inspired Tensegrity Soft Modular Robots

Advanced Artificial Muscle for Flexible Material-Based Reconfigurable Soft Robots.

Programmable and Resilient Metamaterials with Anisotropic and Non-Linear Mechanical Responses Composed Exclusively of Stiff Constituents.

Design and printing of proprioceptive three-dimensional architected robotic metamaterials

Modeling and Design of Lattice-Reinforced Pneumatic Soft Robots

Superflexible Carbon Nanofibers for Multidimensional Complex Deformation Sensing in Soft Robots

Bioinspired Continuum Robots with Programmable Stiffness by Harnessing Phase Change Materials (Adv. Mater. Technol. 6/2023)

Evolutionary Co-Design of Morphology and Control of Soft Tensegrity Modular Robots with Programmable Stiffness

HEDRA: A Bio-Inspired Modular Tensegrity Soft Robot With Polyhedral Parallel Modules

Bioinspired Continuum Robots with Programmable Stiffness by Harnessing Phase Change Materials

Bridging Hard and Soft: Mechanical Metamaterials Enable Rigid Torque Transmission in Soft Robots

Soft Adaptive Mechanical Metamaterials

A Multimodal Self‐Propelling Tensegrity Structure

Design and locomotion control of soft robot using friction manipulation and motor-tendon actuation

Novel 4D-printed multi-stable metamaterials: programmability of force-displacement behaviour and deformation sequence