Abstract:Tensegrity structures have been widely utilized as lightweight structures due to their high stiffness-to-mass and strength-to-mass ratios. Minimal mass design of tensegrity structures subject to external loads and specific constraints (e.g., member yielding and buckling) has been intensively studied. However, all the existing studies focus on passive tensegrity structures, i.e., the structural members cannot change their lengths actively and the structure has to passively resist external loads. An active tensegrity structure equipped with actuators can actively adapt its internal forces and nodal positions and thus can actively resist external loads. Therefore, it is expected that active tensegrity structures use less material compared to passive tensegrity structures thus leading to a smaller mass. Due to the integration of the active control system, the design of active tensegrity structures is different from passive tensegrity structures. This study proposes a general approach for the design of minimal mass active tensegrity structures based on a mixed integer programming scheme, in which the member crosssectional areas, prestress, actuator layout and control strategies (i.e., actuator length changes) are designed simultaneously. The member cross-sectional areas, prestress level, and actuator control strategies are treated as continuous variables and the actuator layout is treated as a binary variable. The equilibrium condition, member yielding, cable slackness, strut buckling, and the limitations on the nodal displacements as well as other practical requirements are formulated as constraints. Three typical active tensegrity structures are designed through the proposed approach and the results are benchmarked with the equivalent minimal mass passive designs. It is illustrated that the active designs can significantly decrease the material consumption compared with the equivalent passive designs thus leading to more lightweight tensegrity structures.

A Multimodal Self‐Propelling Tensegrity Structure

Multi-Stable Tensegrity Structures

Research on Innovative Fluid-Driven Pipe-Strut Tensegrity Structure

Study and application of tensegrity torus

Automatic Assembly of Tensegrity Chain Structures along Axes Based on NURBS Curves

Minimal Mass Design of Active Tensegrity Structures

Automatic construction of tensegrity structures with complex surfaces based on circle packing

Rolling Gaits of a Strut-Actuated Six-Strut Spherical Tensegrity

Research on a New Class of Planar Tensegrity Trusses Consisting of Repetitive Units

A New Tensegrity Module — “Torus”

Optimal displacement control of tensegrity structures based on linear programming

A Novel Two-Step Tensegrity Topology-Finding Method Based on Mixed Integer Programming and Nonlinear Programming

Self-Equilibrium, Mechanism Stiffness, and Self-Stress Design of General Tensegrity with Rigid Bodies or Supports: A Unified Analysis Approach

A unified framework for mechanical modeling and control of tensegrity robots

Tensegrity Robotics

Motion Behavior of a 30-Strut Locomotive Tensegrity Robot

Design of a Variable Stiffness Quasi-Direct Drive Cable-Actuated Tensegrity Robot

HEDRA: A Bio-Inspired Modular Tensegrity Soft Robot With Polyhedral Parallel Modules

Geometric Static Modeling Framework for Piecewise-Continuous Curved-Link Multi Point-of-Contact Tensegrity Robots

A Symmetric Three Degree of Freedom Tensegrity Mechanism with Dual Operation Modes for Robot Actuation

A tensegrity-based morphing module for assembling various deployable structures