Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

A predictive model for sandstone permeability based on the Coulomb-Mohr criterion

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Predicting the Permeability Coefficient of Polydispersed Sand Via Coupled CFD–DEM Simulations

Analysis of Damage and Permeability Evolution of Sandstone under Compression Deformation

A new predrilling reservoir permeability prediction model and its application

Modeling study of sandstone permeability under true triaxial stress based on backpropagation neural network, genetic programming, and multiple regression analysis

A Modified Model for Predicting the Strength of Drying-Wetting Cycled Sandstone Based on the P-Wave Velocity

Experimental and numerical modelling of the mechanical behaviour of low-permeability sandstone considering hydromechanics

New fractal-dimension-based relation model for estimating absolute permeability through capillary pressure curves

A Semi-analytical Model for Pressure-Dependent Permeability of Tight Sandstone Reservoirs

A New Model for Predicting Permeability of Chang 7 Tight Sandstone Based on Fractal Characteristics from High-Pressure Mercury Injection

Mechanical Behaviors of Low-Permeability Sandstone under the Coupled Elastoplastic Damage and Evolved Gas Permeability

Experimental and Numerical Investigation of Permeability Evolution with Damage of Sandstone under Triaxial Compression

Comparative study of models for predicting permeability from nuclear magnetic resonance (NMR) logs in two Chinese tight sandstone reservoirs

A Permeability Prediction Model of Single-Peak NMR T2 Distribution in Tight Sandstones: A Case Study on the Huangliu Formation, Yinggehai Basin, China

Permeability Prediction from Mercury Injection Capillary Pressure Curves by Partial Least Squares Regression Method in Tight Sandstone Reservoirs

Permeability prediction based on dual seismic pore structure factors

Competing impacts of internal pores dissolution and external compression on the permeability evolution during the infiltration of weakly acidic fluids

Investigating low-permeability sandstone based on physical experiments and predictive modeling

Experimental and Numerical Validation of an Effective Stress-Sensitive Permeability Model Under Hydromechanical Interactions

Experimental Study on the Dilatancy Characteristics and Permeability Evolution of Sandstone under Different Confining Pressures