Abstract:Nuclear magnetic resonance (NMR) provides a new method for quantitative characterization of pore structure of tight sandstone with high accuracy, fast and non-destructive measurement of micro-nano-scale pores.Based on NMR T2 spectrum method scaled by mercury injection data, aiming at inaccurate measurement caused by the mercury injection saturation less than 100% in tight sandstone, the mercury injection curve and T2 spectrum are accumulated from largest pore on the right boundary to small pore on the left side;it is suggested to select the pore-throat radius range of mercury injection measurement in the rightward accumulated curve as the comparative interval of NMR pore-throat radius.In addition, the longitudinal interpolation and the least squares method are adopted to construct the pore-throat radius distribution curve transformed by T2 spectrum.The Carboniferous-Permian tight sandstone gas reservoir in eastern Linqing depression is chosen as research object to quantitatively study the pore structure characteristics using the NMR T2 spectrum, pore-throat radius conversion coefficient and distribution obtained by improved method.Based on rock thin-section and SEM observations, the difference genesis of pore structure and reservoir effectiveness of tight sandstone are also discussed.The results show that the NMR pore-throat radius curve obtained by the improved method is highly consistent with the mercury injection curve, significantly increasing the accuracy of NMR test in tight sandstone.In the Carboniferous-Permian tight sandstone of the study area, pore-throat radius is mainly distributed in the range of 0.002-2μm, generally corresponding to submicron-nano pores.However, the pore-throat radius distribution varies obviously with different sandstone types.Lithic quartz sandstone is rich in silicon, lacking plastic debris and matrix, generally dominated by submicron pore throat, including micron pore throat.Lithic feldspar sandstone and feldspar lithic sandstone (rich in quartz) has high content of quartz, and low contents of plastic debris and matrix, generally classified as submicron-nano pore throat (dominated by nanos).Feldspar lithic sandstone (rich in lithic fragments) and lithic sandstone are poor in quartz while rich in plastic debris and matrix, mainly classified as nano pore-throat with radius less than 0.05μm.Microscopic petrographic components are key factors controlling pore structure variability and reservoir effectiveness.On the macroscopic level, reservoir quality may be controlled by sedimentary microfacies.The coarse-and fine-grained micofacies lithic quartz sandstones stranded in the point bar or river bed are the most favorable reservoirs.Fine-grained micofacies lithic feldspar sandstones at the point bar and feldspar lithic sandstones (quartz-rich) in diversion channels or at barrier dams can be considered as relatively effective reservoirs, while the feldspar lithic sandstones (rich in lithic fragments) and lithic sandstones of tide-flat facies are always invalid reservoirs with extremely poor reserving capability and permeability.

A Permeability Prediction Model of Single-Peak NMR T2 Distribution in Tight Sandstones: A Case Study on the Huangliu Formation, Yinggehai Basin, China

Nuclear Magnetic Resonance T 2 Distribution-Based Gas–Water Relative Permeability Prediction in Tight Sandstone Reservoirs: A Case Study on Central Sichuan Basin, China

EAEstimation Model of Permeability for Tight Sandstone Reservoirs Based on Nuclear Magetic Resonance T2 Centralized Distribution Method*

Comparative study of models for predicting permeability from nuclear magnetic resonance (NMR) logs in two Chinese tight sandstone reservoirs

Nuclear Magnetic Resonance Logging-Based Permeability Classification Modeling for Tight Sandstone Reservoirs

A New Model for Predicting Permeability of Chang 7 Tight Sandstone Based on Fractal Characteristics from High-Pressure Mercury Injection

A Semi-analytical Model for Pressure-Dependent Permeability of Tight Sandstone Reservoirs

Permeability evaluation of tight sandstone based on dual T-2 cutoff values measured by NMR

Investigating NMR-based Absolute and Relative Permeability Models of Sandstone Using Digital Rock Techniques

Petrophysical Parameter Prediction by NMR Measurement in Tight Sandstone

A novel fractal model for estimating permeability in low-permeable sandstone reservoirs

A new predrilling reservoir permeability prediction model and its application

Experimental Investigation of Pore Characteristics and Permeability in Coal-Measure Sandstones in Jixi Basin, China

Estimation of Permeability by Integrating Nuclear Magnetic Resonance (NMR) Logs with Mercury Injection Capillary Pressure (MICP) Data in Tight Gas Sands

Quantitative characterization of pore structure of tight gas sandstone reservoirs by NMR T2 spectrum technology:a case study of Carboniferous-Permian tight sandstone reservoir in Linqing depression

Determination of permeability in tight sandstone reservoirs using Gaussian process regression and high-pressure porosimetry:A case study of the Member-7 of Yanchang Formation in the Jiyuan area of the Ordos Basin

A New Method for Predicting Capillary Pressure Curves Based on NMR Logging in Tight Sandstone Reservoirs

A Novel Method to Predict the Permeability of Heterogeneous Sandstones Using Multiple Echo Spacing NMR Measurements

Fractal Analysis of Tight Sandstone Petrophysical Properties in Unconventional Oil Reservoirs with NMR and Rate-Controlled Porosimetry

Permeability Estimation of Tight Sandstone Based on Dual T2 Cutoff Value Model and Fluid Substitution

Permeability Prediction from Mercury Injection Capillary Pressure Curves by Partial Least Squares Regression Method in Tight Sandstone Reservoirs