Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

Experimental and numerical modelling of the mechanical behaviour of low-permeability sandstone considering hydromechanics

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Analysis of Damage and Permeability Evolution of Sandstone under Compression Deformation

Investigating low-permeability sandstone based on physical experiments and predictive modeling

Experimental and Numerical Validation of an Effective Stress-Sensitive Permeability Model Under Hydromechanical Interactions

Experimental study on the mechanical properties, acoustic emission characteristics, and permeability evolution of sandstone under triaxial hydromechanical coupling

Mechanical Properties and Permeability Evolution of Red Sandstone Subjected to Hydro-mechanical Coupling: Experiment and Discrete Element Modelling

Experimental and Numerical Investigation of Permeability Evolution with Damage of Sandstone under Triaxial Compression

Mechanical Behaviors of Low-Permeability Sandstone under the Coupled Elastoplastic Damage and Evolved Gas Permeability

Effects of Confining Pressure on Permeability in a Single Fracture Based on the Deformation of Hydraulic Aperture at Low Fluid Velocities

Permeability of Argillaceous Sandstone Modeled with Tortuous Capillary Tubes Using Fractal Geometry

Coupling between the statistical damage model and permeability variation in reservoir sandstone: Theoretical analysis and verification

Experimental Study on the Dilatancy Characteristics and Permeability Evolution of Sandstone under Different Confining Pressures

Influence of pore structures on the mechanical behavior of low-permeability sandstones: numerical reconstruction and analysis

Study on Hydro-Mechanical Coupling Failure and Permeability Enhancement Mechanisms for Sandstone with T-Shaped Fractures

Numerical Simulation of Hydraulic Fracturing in Low-/High-Permeability, Quasi-Brittle and Heterogeneous Rocks

Modeling Investigation of Coupling Between Damage and Permeability for Sandstone

Experimental and model investigation on hydro-mechanical behaviour of sandy mudstone

Experimental and Numerical Studies of Water–Sand Flow in Fractured Porous Media

A Semi-analytical Model for Pressure-Dependent Permeability of Tight Sandstone Reservoirs

A novel fractal model for estimating permeability in low-permeable sandstone reservoirs