Abstract:In the conventional metal extraction process, copper-nickel sulfide ores are generally treated by pyrometallurgical processes, including smelting and converting operation. The purpose of the smelting process is to eliminate most of the iron and to concentrate the valuable metals, such as nickel, copper and platinum group metals, into a low-nickel matte. Then, the remaining iron is oxidized and fluxed for removal as silicate slag in the converting process, and the low-nickel matte is converted into a high-nickel matte. However, a substantial portion of cobalt is also oxidized and converted into the slag phase. Additionally, the subsequent treatment of the high-nickel matte after the grinding and flotation processes is complicated, and leads to the dispersion of noble metals. Usually, the loss of noble metals is about 10% ~ 20%. Direct treatment of low-nickel matte by hydrometallurgical methods instead of the converting process may be a good choice, which will prevent the loss of associated elements, such as cobalt and noble metals. Since copper has a very strong affinity for sulfur, the sulfides of iron, cobalt and nickel may dissolve into the liquid phase (leach liquor) under controlled the acidity of the solution, whereas the cuprous sulfide should remain in the residue. The inert noble metals should concentrate in the cuprous sulfide. However, a large amount of toxic hydrogen sulfide will be released in the leaching process, which can be converted to elemental sulfur by the Claus process. Based on the above considerations, it is possible to develop a method for extracting valuable metals from low-nickel matte and recovering the associated cobalt and noble metals. In this study, the kinetics of the acid leaching process of low-nickel matte under atmospheric pressure was studied. In addition, the effects of the stirring speed, initial sulfuric acid concentration, reaction temperature and particle size on the leaching of nickel were investigated. The kinetic analysis of the leaching data for various experimental conditions indicated that the reaction was controlled by diffusion through an inert porous layer. It was determined that the reaction order was 0.54 with respect to sulfuric acid with an activation energy of 58.3 kJ mol−1.

Ignition and combustion of synthetic nickel mattes in simulated flash smelting conditions

Reduction of nickel-copper matte/oxysulfide/slag

Ash Aerosol Formation from Oxy-Coal Combustion and Its Relation to Ash Deposit Chemistry

Artificial Slags with Modulated Properties for Controlled Nickel Dissolution in Smelting Process

Modeling of Exchange Interactions in Melts Formed During Joint Smelting of Oxidized Nickel Ores and Pyrrhotite Concentrates

Efficient nickel extraction from nickel matte by combined atmospheric-oxygen pressure acid leaching: Thermodynamic analysis and sulfur conversion mechanism

Structure and adaptability of FexO-SiO2-MgO-15 wt% CaO-0.026 wt% NiO slag with the Fe/SiO2 mass ratio of 1.2 in flash matte smelting

Optimization of converting process for matte of oxidized nickel ores and sulfide copper ores joint smelting based on thermodynamic simulation

Ignition and kinetic-limited oxidation analysis of single iron microparticles in hot laminar flows

Thermal Oxidation Characteristics for Smoke Particles from an Abused Prismatic Li(Ni0.6Co0.2Mn0.2)O2 Battery

Fe/SiO2 Ratio on the Properties, Microstructure and Fe-Containing Phases of Nickel Matte Smelting Slag

Structural and compositional analysis of nickel phases at anode/ electrolyte interface using propane/air-oriented syngas

Kinetics of nickel leaching from low-nickel matte in sulfuric acid solution under atmospheric pressure

The Effect of the Nickel Content and Mechanical Activation on Combustion in the 5Ti + 3Si + xNi System

Combustion synthesis and characterization of NiCuZn ferrite powders

Intensifying the Selective Sulfidation of Nickel in Saprolitic Laterites by Sodium Salts

Reduction-Sulfurization Smelting Process of Waste Hydrogenation Catalysts, Automotive Exhaust Purifier Waste Catalysts, and Laterite Nickel Ore

Numerical simulation of the effect of sulfide concentrate particle size on pollutant emission from flash smelting furnace

Reductive behavior of nickel and iron metallization in magnesian siliceous nickel laterite ores under the action of sulfur-bearing natural gas

Experimental Study on the Phase Equilibrium of Copper Matte and Silica-Saturated FeO X -Sio 2 -Based Slags in Pyrometallurgical WEEE Processing

Frictional ignition of dispersion-strengthened Ni-Cr alloys