Abstract:Cylindrical metal fiber filters have the advantages of high-temperature resistance, radiation resistance, and large filtration area. They have been widely used in the filtration and emission systems of nuclear power plants and are mainly used to remove radioactive aerosols in the containment under severe accidents. To optimize the filter structure, this research uses the numerical calculation method to verify the flat metal fiber's flow resistance and filtration efficiency. Based on the verification results, the performance of pleated cylindrical filter element is calculated (including pressure distribution, velocity distribution and efficiency distribution, etc.), the flow resistance and filtration efficiency of the cylindrical structure are analyzed, and the performance of the cylindrical filter is compared with that of the flat filter. The comparison found that due to the uneven flow distribution in the vertical direction of the cylindrical structure, the filtration efficiency will be lost after the flat filter is processed into a filter cartridge. Based on the research results, the flow resistance and filtration efficiency of filters of different sizes are also calculated, and the structural size of the cylindrical filter element is optimized. The results show that increasing the outer diameter of the filter element and reducing the height of the filter element can reduce the resistance, improve the filtration efficiency, and flatten the distribution of velocity and efficiency. For a filter element with a height of 500 mm, it is recommended to set the outer diameter to 175 mm. The research results can provide a design reference for engineering filter elements processing and manufacturing.

Modeling and design optimization for pleated membrane filters

Modeling and design optimization for pleated membrane filters

Optimization of Pleated Filter Designs Using a Finite-Element Numerical Model

Flow and fouling in a pleated membrane filter

Modeling of the Effects of Pleat Packing Density and Cartridge Geometry on the Performance of Pleated Membrane Filters

Pressure drop and optimization meta-models for arbitrary low-height pleated filter shapes and flowrates

Membrane filtration with multiple fouling mechanisms

A macroscale model for simulating pressure drop and collection efficiency of pleated filters over time

A simple semi-numerical model for designing pleated air filters under dust loading

Flow and fouling in membrane filters: effects of membrane morphology

Influence of pleated geometry on the pressure drop of filters during dust loading process: experimental and modelling study

Flow and transport in a pleated filter

Flow and fouling in elastic membrane filters with hierarchical branching pore morphology

Optimization on the performance of fibrous filter through computational fluid dynamic simulation coupled with response surface methodology

Impact of Pleating on the Filtration Performance of Fibrous Air Filters

Filter Pleating Design for Cabin Air Filtration

Flow through pore-size graded membrane pore network

Three-dimensional numerical simulation and structural optimization of filtration performance of pleated cylindrical metal fiber filter