Abstract:Filters that act by adsorbing contaminant onto their pore walls will experience a decrease in porosity over time, and may eventually block. As adsorption will generally be larger towards the entrance of a filter, where the concentration of contaminant particles is higher, these effects can also result in a spatially varying porosity. We investigate this dynamic process using an extension of homogenization theory that accounts for a macroscale variation in microstructure. We formulate and homogenize the coupled problems of flow through a filter with a near-periodic time-dependent microstructure, solute transport due to advection, diffusion, and filter adsorption, and filter structure evolution due to the adsorption of contaminant. We use the homogenized equations to investigate how the contaminant removal and filter lifespan depend on the initial porosity distribution for a unidirectional flow. We confirm a conjecture made in Dalwadi et al. (2015) that filters with an initially negative porosity gradient have a longer lifespan and remove more contaminant than filters with an initially constant porosity, or worse, an initially positive porosity gradient. Additionally, we determine which initial porosity distributions result in a filter that will block everywhere at once by exploiting an asymptotic reduction of the homogenized equations. We show that these filters remove more contaminant than other filters with the same initial average porosity, but that filters which block everywhere at once are limited by how large their initial average porosity can be.

Flow through pore-size graded membrane pore network

Flow through Pore-Size Graded Membrane Pore Networks

A Graphical Representation of Membrane Filtration

Flow and fouling in membrane filters: effects of membrane morphology

Flow and fouling in a pleated membrane filter

Network-based membrane filters: Influence of network and pore size variability on filtration performance

Flow and fouling in elastic membrane filters with hierarchical branching pore morphology

Flow and transport in a pleated filter

Nanostructured micrometric-pore membranes for nanofiltration: Micrometric geometry may optimize performance, energy efficiency and operational lifetime

Modeling and design optimization for pleated membrane filters

Microscopic Mechanism Of Membrane Fouling In Micro-Filtration

The role of fouling in optimizing direct-flow filtration module design

A multiscale method to calculate filter blockage

Optimizing the operation of a direct-flow filtration device

Effect of inner diameter, filter length, and pore size on hollow fiber filter fouling during perfusion cell culture

Effect of Membrane Pore Morphology on Microfiltration Organic Fouling: PTFE/PVDF Blend Membranes Compared with PVDF Membranes

Critical flux of surface-patterned ultrafiltration membranes during cross-flow filtration of colloidal particles

Interfacial co-assembly strategy towards gradient mesoporous hollow sheet for molecule filtration