Abstract:During filtration in reverse osmosis membranes (ROM), the system performance is dramatically affected by membrane fouling which causes a significant decrease in permeate flux as well as an increase in the energy input required to operate the system. In this work, we develop a model, able to dynamically capture foulant evolution, that couples the transient Navier–Stokes and the advection–diffusion equations, with an adsorption–desorption equation for the foulant accumulation. The model is validated against unsteady measurements of permeate flux as well as steady-state spatial fouling patterns. For a straight channel, we derive a universal scaling relationship between the Sherwood and Bejan numbers, i.e. the dimensionless permeate flux through the membrane and the pressure drop along the channel, respectively, and generalize this result to membranes subject to morphological and/or topological modifications, i.e. whose shape (wiggliness) or surface roughness is altered from the rectangular and flat reference case. We demonstrate that a universal scaling can be identified through the definition of a modified Reynolds number, $Re^{\star }$ , that accounts for the additional length scales introduced by the membrane modifications, and a membrane performance index, $\unicode[STIX]{x1D709}$ , an aggregate efficiency measure with respect to both clean permeate flux and energy input required to operate the system. Our numerical simulations demonstrate that ‘wiggly’ membranes outperform ‘rough’ membranes for smaller values of $Re^{\star }$ , while the trend is reversed at higher $Re^{\star }$ . The proposed approach is able to quantitatively investigate, optimize and guide the design of both morphologically and topologically altered membranes under the same framework, while providing insights into the physical mechanisms controlling the overall system performance.

Membrane filtration with multiple fouling mechanisms

Microscopic Mechanism Of Membrane Fouling In Micro-Filtration

A Simple Method to Identify the Dominant Fouling Mechanisms during Membrane Filtration Based on Piecewise Multiple Linear Regression

Flow and fouling in membrane filters: effects of membrane morphology

Flow and fouling in elastic membrane filters with hierarchical branching pore morphology

Modeling of the Variations of Permeate Flux, Concentration Polarization, and Solute Rejection in Nanofiltration System

Modeling and design optimization for pleated membrane filters

An Evaluation of the Relationship between Membrane Properties and the Fouling Mechanism Based on a Blocking Filtration Model

An Extended Standard Blocking Filtration Law for Exploring Membrane Pore Internal Fouling Due to Rate-Determining Adsorption

Evaluation of Organic and Inorganic Foulant Interaction Using Modified Fouling Models in Constant Flux Dead-End Operation with Microfiltration Membranes

A review of CFD simulation in pressure driven membrane with fouling model and anti-fouling strategy

Flow and fouling in a pleated membrane filter

Modeling of NF/RO membrane fouling and flux decline using real-time observations

Review of membrane fouling stages and mathematical models for hollow fiber membrane

Modeling and simulation-assisted strategies for effective membrane-fouling mitigation during membrane bioreactor operation

A combined model for describing the trans-membrane pressure (P) variation in constant flux dead-end microfiltration (MF) process

Dynamic Monte Carlo Simulation of Protein-Membrane Interaction and Its Implication on Micro-Filtration Process

A Comprehensive Review on Membrane Fouling: Mathematical Modelling, Prediction, Diagnosis, and Mitigation

Rough or wiggly? Membrane topology and morphology for fouling control