An Evaluation of the Relationship between Membrane Properties and the Fouling Mechanism Based on a Blocking Filtration Model

Nobuyuki Katagiri,Takehiro Uchida,Hironori Takahashi,Eiji Iritani

DOI: https://doi.org/10.3390/separations11030070

2024-02-24

Separations

Abstract:Microfiltration plays an increasingly important role in various fields. Consequently, elucidating the mechanism of membrane fouling has emerged as a pivotal issue that needs to be resolved. In this study, a blocking filtration model was employed to evaluate the effects of membrane properties on the fouling mechanism during the microfiltration of representative polysaccharides, namely sodium alginate, pectin, and xanthan gum. Microfiltration membranes composed of hydrophilic and hydrophobic PVDF, mixed cellulose ester, as well as hydrophilic and hydrophobic PTFE were used as filter media. The flux decline behavior was significantly affected by the membrane properties, with hydrophilic membranes exhibiting a slower decrease in filtration rate. The model analysis revealed a correlation between the blocking characteristic values and the membrane properties. Although the blocking index n showed membrane material dependence, the values of this parameter remained consistent across various filtration conditions, including the wettability of the membrane surface, solute concentration, and pressure (pectin: n = 1.86, 1.85, 1.50, and 1.50 for hydrophilic PVDF, hydrophobic PVDF, hydrophilic PTFE, and hydrophobic PTFE, respectively). The resistance coefficient k was influenced by the characteristics of the membrane surface; the k values of the hydrophobic membranes were higher than those of the hydrophilic ones (pectin: k = 0.00084, 0.00725, 0.00714, and 0.0384 s1−n/cm2−n for hydrophilic PVDF, hydrophobic PVDF, hydrophilic PTFE, and hydrophobic PTFE, respectively). The model calculations, based on the values of n and k, demonstrated a relatively good agreement with the experimental data.

chemistry, analytical

What problem does this paper attempt to address?

The problem that this paper attempts to solve is:

Microfiltration technology is increasingly widely used in fields such as wastewater treatment, drinking water production, and the food and pharmaceutical industries. However, the sharp increase in filtration resistance caused by membrane fouling remains an important challenge to be addressed. Membrane fouling is due to the adhesion and deposition of solutes and particulate matter on the membrane surface, resulting in pore blockage and cake formation. Therefore, clarifying the membrane fouling mechanism and developing a method to estimate the increase in filtration resistance during the filtration process are of great significance for achieving stable microfiltration operations.

For this purpose, this study used the blocking filtration model to evaluate the influence of the hydrophilicity and hydrophobicity of different membrane materials (polyvinylidene fluoride (PVDF), mixed cellulose ester (MCE), and polytetrafluoroethylene (PTFE)) on the fouling mechanisms during the microfiltration process of three representative polysaccharides (sodium alginate, pectin, and xanthan gum). By analyzing the relationship between the membrane blocking characteristic values and the membrane properties, the study aims to provide an in - depth understanding of the membrane fouling mechanism, which will help develop efficient membrane filtration operation methods and the preparation of anti - fouling membranes.