Abstract:As a pathway to green hydrogen, the catalytic dehydrogenation of methane is an economical and CO x -free alternative to produce sufficient volumes of hydrogen to address energy sustainability. This work attempts to develop a catalyst to enhance conversion, stability, and favorable carbon nanostructures. Monometallic Fe catalysts were synthesized on a mesoporous carbon template to identify the best catalyst synthesis methodology covering incipient wetness, hydrothermal, and wet impregnation methods. As a logical step to enhance the conversion, stability, and ease of separation of the catalyst from the product carbon, a bimetallic Fe–Mo was synthesized on the same mesoporous carbon template for the first time, using the hydrothermal method, by varying the Mo loading from 2.5 to 15%. The optimal catalyst design had a composition of 30%Fe–5%Mo with a specific surface area of 606.9 g/m2, offering the highest conversion and stability, at a temperature of 950 °C. The highest conversion corresponded to the lowest space velocity, highest reaction temperature, and highest CH4 concentration, with a maximum conversion of 90% and being stable until the end of 2 h of reaction time. X-ray diffraction analysis revealed the presence of Fe2O3 and mixed oxides, Fe2(MoO4)3 and FeMoO4 in the bimetallic catalyst. The initial H2 yield was ∼61%, and it decreased during the reaction, reaching 48% after 4 h of reaction. Various structural, textural, and morphological characterizations of the catalyst pre- and postreaction were performed using advanced analytical techniques. Graphitic carbon, an Fe–Mo alloy, and FeMoO4 phases were observed by XRD patterns of the spent catalyst. Carbon depositions with varying morphologies were observed under different reaction conditions ranging from carbon nanoparticles and carbon nanotubes to agglomerates of nanoparticles and nanoflowers. A well-defined network of carbon nanoflowers along with bamboo-shaped carbon nanotubes could be observed over the surface of the best catalyst under the optimized reaction conditions.

Catalytic Activity of CO2-Derived Transition Metal–Carbon Catalysts in Methane Pyrolysis

Engineering MOx/Ni Inverse Catalysts for Low-Temperature CO2 Activation with High Methane Yields

Thermo-catalytic methane decomposition over unsupported Fe–Al and Co–Al catalysts for hydrogen and carbon nanostructures production

Nonprecious Single Atom Catalyst for Methane Pyrolysis

Co-Ni on zirconia and titania catalysts for methane decomposition to hydrogen and carbon nanomaterials: The role of metal-support interactions

Oxidant-assisted methane pyrolysis

Synergetic effects of Al addition on the performance of CoFe 2 O 4 catalyst for hydrogen production and filamentous carbon formation from direct cracking of methane

Heterogeneous Catalysts for Carbon Dioxide Methanation: A View on Catalytic Performance

Methane Decomposition Over Modified Carbon Fibers as Effective Catalysts for Hydrogen Production

Cobalt-doped Ni-based catalysts for low-temperature CO 2 methanation

Mechanism on CMD reaction regulated by supports and promoters of Fe-based catalysts

Mechanism of activated carbon-catalyzed methane decomposition process for the production of hydrogen and high-value carbon

Theoretical Insights into Dual-Metal-Site Catalysts for the Nonoxidative Coupling of Methane

Cobalt-Based Non-Precious Metal Catalysts Derived from Metal-Organic Frameworks for High-Rate Hydrogenation of Carbon Dioxide.

Insight and comprehensive study of Ni-based catalysts supported on various metal oxides for CO2 methanation

Highly active Ni/CeO2 catalyst for CO2 methanation: Preparation and characterization

Preparation adjacent Ni-Co bimetallic nano catalyst for dry reforming of methane

Catalytic Dehydrogenation of Methane to Hydrogen and Carbon Nanostructures with Fe–Mo Bimetallic Catalysts

Highly active and stable cobalt catalysts with tungsten carbide-activated carbon support for dry reforming methane: Effect of the different promoters

Small Amounts of Rh-Promoted Ni Catalysts for Methane Reforming with CO 2

Dry Reforming of Methane over CeO2-supported Pt-Co Catalysts with Enhanced Activity