Abstract:The production of hydrogen by water electrolysis has emerged as a promising pathway to achieve a 100% renewable and sustainable hydrogen economy. Up to now, alkaline water electrolysis has been highlighted as a truly alternative strategy for hydrogen production due to the usage of non-expensive electrocatalysts. Ni-based electrocatalysts already have a long century history because of high conductivity, stability, and earth abundancy. However, their strong hydrogen interaction energy slows the Hydrogen Evolution Reaction (HER) activity. Tuning the morphology of the catalyst by increasing the active surface area (e.g., production of nanosheets, nanowires, nanoparticles, etc.) and enhancing the intrinsic activity (e.g., doping, alloying, etc.) can improve the catalytic activity. Binary and ternary alloys based on nickel are a common route to boost their intrinsic activity and tune the morphology. Ternary alloys like CuAlNi, NiMoFe and NiMoW have been previously proposed, although the role of each element is still not fully investigated. Among the alloys, Ni-Fe mixtures have shown better catalytic activity towards HER, and the Mo incorporation has resulted in a reduced onset potential due to favorable hydrogen-metal interaction and development of active sites. The strategy for NiFeMo synthesis is mainly by hydrothermal method or electrodeposition which are limited by low material loading and production volume. Therefore, searching for a technique which is capable of producing trimetallic alloys with a scalable amount is of high interest for the development of hydrogen production. Here, we studied the preparation of FeNi 3 Mo x via a fast and straightforward solution precursor plasma spraying (SPPS) method. The liquid precursors containing metal salts of Ni, Fe, and Mo are used to produce trimetallic solid solutions. The non-stoichiometric nanostructured electrocatalysts are deposited onto stainless-steel mesh (SS-mesh), Ni foam, and carbon paper for the HER in alkaline. We found that tuning Mo content (~9 At%) in the solution precursor conducts to an improved overpotential of 112 mV (iR-corrected) at -10 mA cm -2 and a Tafel slope of 109 mV dec -1 in agreement with a Volmer-Heyrovsky HER route. Energy dispersive X-ray spectroscopy (XPS) has confirmed the reduction in the superficial Ni and Fe oxides with Mo insertion which is directly affecting the electron transport. In addition, to investigate the effect of Mo in more detail, we evaluated the work function using ultraviolet photoelectron spectroscopy (UPS) which shows that Mo incorporation changes linearly the electrocatalyst's work function and it is highly correlated to the hydrogen binding energy. Consequently, the change in the work function, resulting in a weaker hydrogen adsorption energy which leads to an improved hydrogen production. Theoretical catalytic activity maps from Density Functional Theory (DFT) studies have revealed the enhanced HER activity is the responsibility of the active sites near the superficial Mo atoms. Figure 1

Catalytic Dehydrogenation of Methane to Hydrogen and Carbon Nanostructures with Fe–Mo Bimetallic Catalysts

Synergetic effect of Ni‐CeO2 bimetallic catalyst for an effective decomposition of methane to hydrogen and filamentous nanocarbons

Fe Catalysts for Methane Decomposition to Produce Hydrogen and Carbon Nano Materials

Thermo-catalytic methane decomposition over unsupported Fe–Al and Co–Al catalysts for hydrogen and carbon nanostructures production

NiFe and CoFe nanocatalysts supported on highly dispersed alumina-silica: Structure, surface properties, and performance in CO2 methanation

Nonoxidative methane activation, coupling, and conversion to ethane, ethylene, and hydrogen over Fe/HZSM‐5, Mo/HZSM‐5, and Fe–Mo/HZSM‐5 catalysts in packed bed reactor

Hollow Hemispherical Carbon Microspheres with Mo2C Nanoparticles Synthesized by Precursor Design: Effective Noble Metal‐Free Catalysts for Dehydrogenation

Molybdenum Carbide/Ni Nanoparticles Embedded into Carbon Nanofibers as an Effective Non-Precious Catalyst for Green Hydrogen Production from Methanol Electrooxidation

Metal organic framework derived Ni/CeO2 catalyst with highly dispersed ultra-fine Ni nanoparticles: Impregnation synthesis and the application in CO2 methanation

Synergetic effects of Al addition on the performance of CoFe 2 O 4 catalyst for hydrogen production and filamentous carbon formation from direct cracking of methane

NiFe/Al2O3/Fe-frame catalyst for COx-free hydrogen evolution from catalytic decomposition of methane: Performance and kinetics

Iron promoted MOF-derived carbon encapsulated NiFe alloy nanoparticles core-shell catalyst for CO2 methanation

Stoichiometric‐Ratio‐Controlled Fe and Ni Non‐noble Metal Catalysts Supported on γ‐Al2O3 for Turquoise Hydrogen and Carbon Nanotubes Production

Reactive ball-milling synthesis of Co-Fe bimetallic catalyst for efficient hydrogenation of carbon dioxide to value-added hydrocarbons

Molybdenum-based Nanoparticles (mo2c, MoP and MoS2) Coupled Heteroatoms-Doped Carbon Nanosheets for Efficient Hydrogen Evolution Reaction

Glucose-Assisted Preparation of a Nickel–Molybdenum Carbide Bimetallic Catalyst for Chemoselective Hydrogenation of Nitroaromatics and Hydrodeoxygenation of M-Cresol

Mixed‐Metal MOF‐74 Templated Catalysts for Efficient Carbon Dioxide Capture and Methanation

Methane Decomposition Over ZrO2-Supported Fe and Fe-Ni Catalysts-Effects of Doping La2O3 and WO3

Tuning Mo Incorporation in Ni-Fe-Mo Solid Solutions: Towards an Improved Hydrogen Adsorption Energy

An Al2O3-supported NiFe bimetallic catalyst derived from hydrotalcite precursors for efficient CO2 methanation

Photothermal methane coupling into liquid fuels with hydrogen evolution over nanocatalysts based on layered double hydroxide (LDH)