Abstract:All Solid State Lithium based Batteries (ASSLB) using a stable inorganic solid state electrolyte are envisaged as the most promising answer to solve the safety issues of Li-ion batteries using inflammable organic liquid electrolyte. Garnet Li 7 La 3 Zr 2 O 7 showing high ionic conductivity and high stability versus metallic lithium is currently the most appealing solid electrolyte to be used in oxide based ASSLB. However, its high reactivity with moisture and sensitivity to all energetic process lead to strong difficulties in obtaining stable fully dense pellets while mandatory to ensure its role as mechanical barrier to avoid the short-circuit caused by Li-dendrites [1-2]. In this work, Spark Plasma Sintering is used as both a characterization and a fast sintering techniques to determine the influence of side products and efficiency of applied processes to remove them in reaching dense pellets with high ionic conductivity. Commercial Ta-doped LLZO powder is fully characterized using conventional techniques to identify chemical and thermal stability. SPS experiments are conducted to determine the influence of the side products on the sintering. The efficiency of powder pretreatment designed to remove side products is determined based on data collected during SPS experiments. SPS parameters (applied pressure, temperature ramping, densification dwell ...) are then optimized allowing reaching in a reproducible way pellets with high density (>97 %) and high mechanical strength. Analysis using XPS, SEM and XRD of obtained pellets shows that decomposition occurs only at the surface while the core of the pellet is made of pure cubic phase Ta-doped LLZO. Impedance spectroscopy is used to evidence the influence of side products on the electrical properties and confirms high ionic conductivity (0.5 mS/cm) and very low electronic conductivity of optimized electrolyte. The sintering temperature and dwell time are then optimized by advanced sintering techniques (high pressure, Flash SPS) allowing to prevent the chemical instability usually observed between LLZO and active materials (LiCoO 2 or Li[Ni 1-x-y Co x Mn y ]O 2 (NCM)) and to obtain a cathodic half-cell (LLZO/positive electrode) in one step. References : [1] H. Yamada, T. Ito, R. Basappa, Electrochimica Acta 222 (2016) 648–656. [2] M. Kotobuki, M.Koishi, Journal of Alloys and Compounds 826 (2020) 15421.

Rapid Processing of Uniform, Thin, Robust, and Large‐Area Garnet Solid Electrolyte by Atmospheric Plasma Spraying

Rapid Processing of Uniform, Thin, Robust, and Large‐Area Garnet Solid Electrolyte by Atmospheric Plasma Spraying (adv. Energy Mater. 30/2023)

Ultrathin Garnet-Type Electrolytes

Rapid Li compensation toward highly conductive solid state electrolyte film

Preparation and Application of Garnet Electrolyte Thin Films: Promise and Challenges

Ta-LLZO Garnet Processed By Spark Plasma Sintering for All Solid State Batteries

Accelerating the Development of LLZO in Solid‐State Batteries Toward Commercialization: A Comprehensive Review

Li7La3Zr2O12 solid electrolyte sintered by the ultrafast high-temperature method

Ultrafast One‐Step Synthesis of Garnet‐Type Solid Electrolytes With Modified Surface and Microstructure for Solid‐State Lithium‐Metal Batteries

In‐Situ Construction of Electronically Insulating and Air‐Stable Ionic Conductor Layer on Electrolyte Surface and Grain Boundary to Enable High‐Performance Garnet‐Type Solid‐State Batteries

Recent Advances of Li7La3Zr2O12-based Solid-state Lithium Batteries Towards High Energy Density

Garnet Li7La3Zr2O12-Based Solid-State Lithium Batteries Achieved by In Situ Thermally Polymerized Gel Polymer Electrolyte

Ultrafast-sintered self-standing LLZO membranes for high energy density lithium-garnet solid-state batteries

Electrolyte melt infiltration for scalable manufacturing of inorganic all-solid-state lithium-ion batteries

A Large‐Scale Fabrication of Flexible, Ultrathin, and Robust solid Electrolyte for Solid‐State Lithium‐Sulfur Batteries

Ultrathin, Flexible Polymer Electrolyte for Cost‐Effective Fabrication of All‐Solid‐State Lithium Metal Batteries

Evaluation of Scalable Synthesis Methods for Aluminum-Substituted Li7La3Zr2O12 Solid Electrolytes

A facile path from fast synthesis of Li-argyrodite conductor to dry forming ultrathin electrolyte membrane for high-energy-density all-solid-state lithium batteries

High Ionic Conductive, Mechanical Robust Sulfide Solid Electrolyte Films and Interface Design for All‐Solid‐State Lithium Metal Batteries

Slurry Casted Ultrathin Li3Zr2Si2PO12 Electrolyte Film for Solid‐State Lithium Metal Batteries