Abstract:The study investigated the effects of construction waste powders exposed to elevated temperatures on the properties of cement mortar. The waste powders were obtained from demolished granite and clay blocks after more than 15 years of their service life. The exposure temperatures were 200 °C, 400 °C, 600 °C, and 800 °C. The heat-treated and untreated waste powders replaced cement in mortars at 10% and 20% by weight. The use of untreated recycled granite and clay powders adversely affected the mechanical strength and transport properties of the cementitious mixtures. On the other hand, the effects of thermal exposure varied for the two powder materials. As the exposure temperature increased, the performance of mixtures containing granite powder gradually deteriorated, while mixtures containing clay powder improved. The efficiency was both worst and best at 800 °C. For instance, a mixture containing 10% clay powder treated at 800 °C exhibited compressive strength equivalent to the reference mortar with no waste material. In contrast, under the same conditions, the compressive strength of the mixture containing granite powder was 33% lower. These results indicate that identifying the type and characteristics of recycled materials is essential for their utilization and application of enhancement methodsThe study investigated the effects of construction waste powders exposed to elevated temperatures on the properties of cement mortar. The waste powders were obtained from demolished granite and clay blocks after more than 15 years of their service life. The exposure temperatures were 200 °C, 400 °C, 600 °C, and 800 °C. The heat-treated and untreated waste powders replaced cement in mortars at 10% and 20% by weight. The use of untreated recycled granite and clay powders adversely affected the mechanical strength and transport properties of the cementitious mixtures. On the other hand, the effects of thermal exposure varied for the two powder materials. As the exposure temperature increased, the performance of mixtures containing granite powder gradually deteriorated, while mixtures containing clay powder improved. The efficiency was both worst and best at 800 °C. For instance, a mixture containing 10% clay powder treated at 800 °C exhibited compressive strength equivalent to the reference mortar with no waste material. In contrast, under the same conditions, the compressive strength of the mixture containing granite powder was 33% lower. These results indicate that identifying the type and characteristics of recycled materials is essential for their utilization and application of enhancement methods.

Evaluating the high‐temperature resistance of self‐compacting mortar incorporating waste andesite powder as a mineral admixture

Effect of curing conditions on cement based self-compacting mortar produced with mortar waste aggregate

Influence of elevated temperature on waste concrete powder and its application in alkali activated materials

Efficient Utilization of Waste Marine Clay for Fine Aggregate to Develop Sustainable and Cost-Effective Strain-Hardening Cement-Based Composites

Insulating and fire‐resistant performance of slag and brick powder based one‐part alkali‐activated lightweight mortars

Effect of White-Portland cement containing micro and nano silica on the mechanical and freeze-thaw properties of self compacting mortars

Reusing Ceramic Waste as a Fine Aggregate and Supplemental Cementitious Material in the Manufacture of Sustainable Concrete

Investigating the effect of elevated temperatures on the utilization of demolished paving block powders as supplementary cementitious materials

From waste to circular economy: Exploring the sustainable potential and engineering properties of self-compacting mortars

Mechanical properties and durability evaluation of self-compacting mortars containing glass and brick powders

Mechanical properties and microscopic characterization of waste perlite powder as supplementary cementitious material

Evaluation of mechanical properties and leaching tests results of mortars containing waste bottom ash as replacement of cement

Effect of Waste Ceramic Powder on the Properties of Alkali–Activated Slag and Fly Ash Pastes Exposed to High Temperature

Influence of waste glass powder as a supplementary cementitious material (SCM) on physical and mechanical properties of cement paste under high temperatures

Effect of Substituting White Cement with Ceramic Waste Powders (CWP) on the Performance of a Mortar Based on Crushed Sand

Mechanical and Durability Properties of Mortars Incorporating Red Mud, Ground Granulated Blast Furnace Slag, and Electric Arc Furnace Dust

Feasibility of Waste Foundry Sand in High-Strength Self-Compacting Concrete and the Effects of Elevated Temperatures

Utilization of Recycled Brick Powder as Supplementary Cementitious Materials—A Comprehensive Review

Reusing Waste Concrete Recycled Powder in Mortar: Paste Substitution versus Cement Substitution

Effect of four-component binder on characteristics of self-compacting and fibre-reinforced self-compacting mortars

Properties and activation modification of eco-friendly cementitious materials incorporating high-volume hydrated cement powder from construction waste