Abstract:Introduction Musculoskeletal modeling (MSKm) and simulation provide an ideal framework for estimating movement-related parameters such as joint contact forces which cannot be measured in vivo. However, these parameters are not well-documented in free-living situations as inertial measurement units (IMUs) have rarely been combined with MSKm workflows. Although IMU-based systems are valuable alternatives to camera-based systems to estimate kinematics, no robust and validated method exists to estimate ground reaction forces (GRF) thereby alleviating the need for force plates. The aim of this study was to implement and validate a workflow for GRF estimation using a combined IMU and MSKm workflow. The ability to estimate such information, when combined with MSKm would provide clinicians access to movement-related relevant to the onset/progression of musculoskeletal diseases in an ecological environment. Research question Can IMU-based kinematics combined with an MSKm-based simulation workflow be used to accurately estimate GRF during gait? Methods Two healthy subjects (1 man, 1 female; age: 27.5±2.2y) walked overground (self-selected speed). MotionCapture (100Hz) and InertialCapture (60Hz) systems were used to record 3D-marker trajectories and body segment orientations. GRF were recorded using force plates (1000Hz). MoCap and InCap kinematics were calculated using OpenSim [1] and sensors-to-segment calibration OpenIMUs [2], respectively. Musculoskeletal model [3] containing 35 DOFs, 49 muscles, and 5 foot contact spheres was used in both approaches. OpenSim Moco was used to track the IMU-based kinematics with two main goals: (i) minimize the error between input kinematics and simulated motion, (ii) minimize the sum of the absolute value of the muscle activations. MocoSolver was applied to compute the optimized motion and muscle activations. GRF were evaluated based on the generated forces of the foot contact spheres. Centre of pressure (COP) was estimated using a Zero Moment Point (ZMP) method [4]. Results RMSE of the joint angle between MoCap and InCap was less 5° for all joint angles. RMSE between InCap kinematics and Moco simulated kinematics were 1-6° for all joint angles with knee and ankle flexion/extension max error of 10°. RMSE of anterior/posterior, vertical, and medio/lateral GRF was 0.10±0.02 BW, 0.25±0.01 BW and 0.06±0.03 BW respectively, compared to measured force plate data (Fig. 1). RMSE of anterior/posterior, and medio/lateral COP was 6.7±0.9cm and 3.8±0.4cm respectively, compared to measured force plate data. Discussion The developed workflow for the estimation of GRF based on IMU-based kinematics and OpenSim Moco provided promising results. However, the contact sphere definition strongly affects the estimated GRF with a direct effect on the calculated COP and ultimately joint moments (not shown).

Estimation of Ground Reaction Forces during Sports Movements by Sensor Fusion from Inertial Measurement Units with 3D Forward Dynamics Model

IMU-based ground reaction force estimation using OpenSim Moco

Predicting kinetics using musculoskeletal modeling and inertial motion capture

An Exploration of Machine-Learning Estimation of Ground Reaction Force from Wearable Sensor Data

Multibody Model with Foot-Deformation Approach for Estimating Ground Reaction Forces and Moments and Joint Torques during Level Walking through Optical Motion Capture without Optimization Techniques

Estimating Ground Reaction Forces from Inertial Sensors

Estimating 3D kinematics and kinetics from virtual inertial sensor data through musculoskeletal movement simulations

Real-time inertial lower body kinematics and ground contact estimation at anatomical foot points for agile human locomotion

Learning to Estimate External Forces of Human Motion in Video

Estimation of Three-Dimensional Lower Limb Kinetics Data during Walking Using Machine Learning from a Single IMU Attached to the Sacrum

Extended Application of Inertial Measurement Units in Biomechanics: From Activity Recognition to Force Estimation

Musculoskeletal simulation of professional ski jumpers during take-off considering aerodynamic forces

An Inertial Measurement Unit Based Method to Estimate Hip and Knee Joint Kinematics in Team Sport Athletes on the Field

Combining Inertial Sensors and Machine Learning to Predict vGRF and Knee Biomechanics during a Double Limb Jump Landing Task

Influence of IMU position and orientation placement errors on ground reaction force estimation

Validity of muscle activation estimated with predicted ground reaction force in inverse dynamics based musculoskeletal simulation during gait

Motion Analysis of Football Kick Based on an IMU Sensor

AHRS-Assisted Dynamic Response Compensation of VGRF for Capacitive Force-Sensing Insoles

Estimation of anthropometrical and inertial body parameters using double integration of residual torques and forces during squat jump

Validation of a Biomechanical Injury and Disease Assessment Platform Applying an Inertial-Based Biosensor and Axis Vector Computation