Abstract:Portable measurement systems using inertial sensors enable motion capture outside the lab, facilitating longitudinal and large-scale studies in natural environments. However, estimating 3D kinematics and kinetics from inertial data for a comprehensive biomechanical movement analysis is still challenging. Machine learning models or stepwise approaches performing Kalman filtering, inverse kinematics, and inverse dynamics can lead to inconsistencies between kinematics and kinetics. We investigated the reconstruction of 3D kinematics and kinetics of arbitrary running motions from inertial sensor data using optimal control simulations of full-body musculoskeletal models. To evaluate the feasibility of the proposed method, we used marker tracking simulations created from optical motion capture data as a reference and for computing virtual inertial data such that the desired solution was known exactly. We generated the inertial tracking simulations by formulating optimal control problems that tracked virtual acceleration and angular velocity while minimizing effort without requiring a task constraint or an initial state. To evaluate the proposed approach, we reconstructed three trials each of straight running, curved running, and a v-cut of 10 participants. We compared the estimated inertial signals and biomechanical variables of the marker and inertial tracking simulations. The inertial data was tracked closely, resulting in low mean root mean squared deviations for pelvis translation (≤20.2 mm), angles (≤1.8 deg), ground reaction forces (≤1.1 BW%), joint moments (≤0.1 BWBH%), and muscle forces (≤5.4 BW%) and high mean coefficients of multiple correlation for all biomechanical variables (≥0.99) . Accordingly, our results showed that optimal control simulations tracking 3D inertial data could reconstruct the kinematics and kinetics of individual trials of all running motions. The simulations led to mutually and dynamically consistent kinematics and kinetics, which allows researching causal chains, for example, to analyze anterior cruciate ligament injury prevention. Our work proved the feasibility of the approach using virtual inertial data. When using the approach in the future with measured data, the sensor location and alignment on the segment must be estimated, and soft-tissue artifacts are potential error sources. Nevertheless, we demonstrated that optimal control simulation tracking inertial data is highly promising for estimating 3D kinematics and kinetics for a comprehensive biomechanical analysis.

Real-time inertial lower body kinematics and ground contact estimation at anatomical foot points for agile human locomotion

Real-Time Foot-Ground Contact Detection for Inertial Motion Capture Based on an Adaptive Weighted Naive Bayes Model

Measuring highly accurate foot position and angle trajectories with foot-mounted IMUs in clinical practice

The Lower Limbs Kinematics Analysis by Wearable Sensor Shoes

Impact-Aware Foot Motion Reconstruction and Ramp/Stair Detection Using One Foot-Mounted Inertial Measurement Unit

IMU-Based Joint Angle Measurement for Gait Analysis

Lower-Body Walking Motion Estimation Using Only Two Shank-Mounted Inertial Measurement Units (IMUs)

Performance Evaluation Of Lower Limb Ambulatory Measurement Using Reduced Inertial Measurement Units And 3r Gait Model

Smoother-Based 3-D Foot Trajectory Estimation Using Inertial Sensors.

OpenSense: An open-source toolbox for inertial-measurement-unit-based measurement of lower extremity kinematics over long durations

Estimation of minimum foot clearance using a single foot-mounted inertial sensor and personalized foot geometry scan

Fast Tool to Evaluate 3D Movements of the Foot-Ankle Complex Using Multi-View Depth Sensors

Estimating Lower Limb Kinematics Using a Reduced Wearable Sensor Count

A Practical Gait Feedback Method Based on Wearable Inertial Sensors for a Drop Foot Assistance Device

Accurate Foot Clearance Estimation During Level and Uneven Ground Walking Using Inertial Sensors

Estimating 3D kinematics and kinetics from virtual inertial sensor data through musculoskeletal movement simulations

Adaptive Threshold based ZUPT for Single IMU enabled Wearable Pedestrian Localization

Development of a Low-Cost Markerless Optical Motion Capture System for Gait Analysis and Anthropometric Parameter Quantification

Development of a Non-Contacting Muscular Activity Measurement System for Evaluating Knee Extensors Training in Real-Time

Estimating Lower Extremity Running Gait Kinematics with a Single Accelerometer: A Deep Learning Approach

Probabilistic Contact State Estimation for Legged Robots using Inertial Information