Abstract:The removal of calcareous deposits from archaeological ceramics is a very normal conservation-restoration treatment. Among the products used, chelating agents are quite common, including ethylenediaminetetraacetic acid salts (EDTA) (Berducou in La Conservation en archéologie: méthodes et pratique de la conservation-restauration des vestiges archéologiques, Masson, Paris, 1990; Buys and Oakley The conservation and restoration of ceramics, Butterworth-Heinemann, Oxford, 1993; Crisci et al. in Appl Phys A Mater Sci Process, 2010. https://doi.org/10.1155/2009/893528). Nevertheless, some studies have proved that they can cause damages on the ceramic pieces, regarding changes in their composition, such as dissolution of calcareous components and metallic oxides leaching (Gibson in Stud Conserv, 1971. https://doi.org/10.1155/2009/893528; Fernández and Seva Sautuola in Rev del Inst Prehist y Arqueol 9:471–982, 2003). As a consequence, their artistic values might also change. In spite of that, these products are nowadays still in use, meaning that the treatments might be changing the information that archaeological ceramics carry. However, from the 80 s onwards a more secure alternative to direct application methods based on thickening agents was developed. With the aim of analysing the degradation mechanisms that may take place after the cleaning treatments' application, ceramic specimens with artificial calcareous deposits (Sáenz-Martínez et al. in Eur Phys J Plus 136:798, 2021) were treated with a low-concentrated solution of EDTA tetrasodium salt applied by immersion and thickened with xanthan gum powder (Vanzan® NF-C). Finally, the products from the cleaning treatments were neutralised, respectively, by immersion and by rinsing with deionized water. The composition of the ceramic samples was established before the growth of calcareous deposits and after the treatments, in order to determine their effectiveness and safety. According to the results, EDTA salt treatments, both by immersion and thickened, were effective regarding the removal of the calcareous deposits and did not modify the elemental and mineralogical original composition of the specimens (XRF, XRPD, TG-DSC). In addition, no gel residues were detected by FTIR-ATR.

THE APPLICATION OF A CHEMICAL STAINING TECHNIQUE TO A STUDY OF DEDOLOMITISATION

Characterisation of mineralised archaeological textile fibres through chemical staining

Chemical Staining Techniques for Drill Core Characterization

Reaction Rates in Chemically Heterogeneous Rock: Coupled Impact of Structure and Flow Properties Studied by X-ray Microtomography.

Red stains on heritage marbles: application of micro-scale analyses to assess the presence and distribution of lead compounds

Coupling X-ray Absorption and Raman Spectroscopies to Characterize Iron Species in a Karst Pedosedimentary Record

Multi-Technique Assessment of Chelators-Loaded PVA-Borax Gel-like Systems Performance in Cleaning of Stone Contaminated with Copper Corrosion Products

Formation of calcite in the presence of dissolved organic matter: Partitioning, fabrics and fluorescence

Testing of the siderophore deferoxamine amended in hydrogels for the cleaning of iron corrosion

The Combined Use of Ion Chromatography and Scanning Electron Microscopy to Assess Salt-affected Mineral Materials in Cultural Heritage

A new approach to assess the chemical composition of powder deposits damaging the stone surfaces of historical monuments

Alkali Carbonate Reaction (acr): Investigations on Alkali Ions Migration and Dedolomitization of Dolostone Aggregate

Chemical destaining and the delta correction for blue intensity measurements of stained lake subfossil trees

STED nanoscopy – A novel way to image the pore space of geological materials

Multicolor Histochemical Staining for Identification of Mineralized and Non-Mineralized Musculoskeletal Tissue: Immunohistochemical and Radiological Validation in Decalcified Bone Samples

Advanced mapping of inorganic treatments on porous carbonate stones by combined synchrotron radiation high lateral μXRPD and μXRF

Chelating agents for the removal of calcareous deposits from archaeological ceramic materials. Compositional evaluation after immersion and physical gel application methods

Study of corrosion in archaeological gilded irons by Raman imaging and a coupled scanning electron microscope-Raman system

Precise determination of dolomite content in marine sediments

Coumarin-based acid dye for fluorescent staining of calcium carbonate particles

Determination of Iron in Abandoned Mine Drainage by UV‐Vis Spectrophotometry and Flame Atomic Absorption Spectrophotometry