Abstract:<p>The chemical, mineralogical and textural investigation of drill cores demands objective and repeatable information unaffected by the human bias to be able to correlate significant features across drillcores. Imaging Laser induced Breakdown Spektroscopy (LIBS) can be applied to large scales at high spatial resolution in relatively short times to obtain detailed chemical, mineralogical and textural information with a minimum of sample preparation. The application of the Spectral Angle Mapper (SAM) algorithm for supervised classification of the LIBS hyperspectral data cubes provides a relatively fast, but easy to handle tool to visualize and quantify variations in the chemical, mineralogical composition of complex ores from the sub-millimetre to the metre scale. The information derived offers novel and barely investigated interpretation opportunities in a very detailed manner which directly can be used for exploration purposes. The investigated Merensky Reef is about 1 m thick. It consists of pegmatoidal pyroxenite framed by the lower and upper thin chromitite seams. The Merensky Reef is one major ore body out of three for platinum-group elements (PGE) within the Bushveld Igneous Complex which is the world&#8217;s largest known layered intrusion and largest PGE resource on Earth&#160;&#160; Detailed LIBS-based imaging measurements with 200&#181;m spotsize were accompanied by space-resolved reference measurements based on SEM/MLA (4&#181;m) and &#181;-EDXRF (20&#181;m), as well as bulk chemical analyses for multiple core slices. The SAM algorithm was applied for classification of hyperspectral LIBS images as being sensitive for differences in mineral chemistry. Focus was put on the pre-processing of LIBS spectra prior to SAM classification, on the development of the spectral library, and on the validation of the classified data. The SAM classification algorithm, which is solely based on ratios between spectral intensities, was found insensitive to normal shot-to-shot plasma variations and to chemically induced matrix effects. However, the algorithm may become inaccurate at low signal to noise ratios, at the border between different mineral grains (mixed spectra), or when classifying chemically similar phases such as pyrite and pyrrhotite. The extent of mixed spectra depends both on the size of the mineral grains as well as on the spot size of the LIBS laser. The SAM algorithm was successfully applied for classification of several base metal sulphides, rock-forming minerals, accessory minerals, as well as several mixed phases representing the main borders between different mineral grains. The obtained classified LIBS image images the spatial distribution of the different phases, which corresponds very well to the reference measurements based on highly space-resolved&#160; EDXRF and SEM/MLA mineral distribution maps. The investigated core piece highlights the extremely heterogeneous distribution of e.g. the sulphide phases. The LIBS-SAM classification image was used to estimate metal concentrations based on point counting. The applicability has been explored for Cu, Ni, S, and Cr. This approach, when applied on sufficiently large surfaces, enables quantification of well-defined mineral phases, as well as the possible detection of trace elements (e.g. Pt, Pd) that occur in very small nuggets.</p>

Chemical Staining Techniques for Drill Core Characterization

Drill-Core Mineral Abundance Estimation Using Hyperspectral and High-Resolution Mineralogical Data

STED nanoscopy – A novel way to image the pore space of geological materials

A Machine Learning Approach for Material Type Logging and Chemical Assaying from Autonomous Measure-While-Drilling (MWD) Data

Novel approach to locate micro-scale mineral regions of interest in real ores

Combined X-Ray Computed Tomography and X-Ray Fluorescence Drill Core Scanning for 3-D Rock and Ore Characterization: Implications for the Lovisa Stratiform Zn-Pb Deposit and Its Structural Setting, Bergslagen, Sweden

Improved imaging and analysis of chlorite in reservoirs and modern day analogues: new insights for reservoir quality and provenance

Postprocessing Workflow for Laboratory Diffraction Contrast Tomography: A Case Study on Chromite Geomaterials

Tracking element-mineral associations with unsupervised learning and dimensionality reduction in chemical and optical image stacks of thin sections

Review of developments in trace‐element fingerprinting of geodynamic settings and their implications for mineral exploration

Methods of laser-based stable isotope measurement applied to diagenetic cements and hydrocarbon reservoir quality

Quantitative mineralogy of chromite ore based on imaging Laser Induced Breakdown Spectroscopy and Spectral Angle Mapper Classification Algorithm

Advanced mapping of inorganic treatments on porous carbonate stones by combined synchrotron radiation high lateral μXRPD and μXRF

Current and emerging analytical techniques for geochemical and geochronological studies

Crystal Identification with the Polarizing Microscope

Applied Mineralogy for Complex and Profound Mineral Processing

Lithology and mineralogy recognition from geochemical logging tool data using multivariate statistical analysis

Automations in Chemostratigraphy: Toward Robust Chemical Data Analysis and Interpretation

Application of the Method of Statistical Comparison of XRD-and XRF-Data for Identification of the Most Representative Rock Samples: A Case Study of an Extensive Collection of Carbonatites and Aluminosilicate Rocks of the Kontozero Alkaline Complex (Kola Peninsula, NW Russia)

Detection and visualization of micron-scale U-Ca phosphates as a key to redox and acid-base conditions in ores: Sandstone-hosted uranium deposit

2D geochemical imaging of biogenic marine carbonates using LA-TOF-ICP-MS at 1 and 2 μm pixel resolution