Abstract:Digital Light Processing (DLP) is a 3D printing technology that enables the fabrication of complex, high-resolutionstructures; however, the mechanical properties of DLP-printed objects are often limited by the resins used. This study focuses on developing and characterizing bio-based polyester UV-curable resins with tunable mechanical properties optimized for DLP 3D printing. Bio-based polyester resins were synthesized by direct esterification polycondensation reaction of itaconic and/or succinic acids with 1,2-propane-, 1,4-butane-, and/or 1,8-octanediols followed by blending with triethylene glycol dimethacrylate. The bio-renewable nature of the resin components provides several advantages over traditional petroleum-derived resins. The diacid and diol monomers come from renewable feedstocks such as corn, soybean, and vegetable oils rather than finite fossil fuel reserves. Furthermore, bio-renewable materials lower dependence on petrochemicals and increase the sustainability of 3D printing. The effects of diacid structure and diol chain length on resin properties were systematically investigated. Chemical characteristics were investigated by NMR and FTIR and suggested successful synthesis of the desired bio-based polyesters. By varying the molecular design, diacid, and diol building blocks, the molecular weight, crosslink density, and mechanical performance were tailored. The liquid resins were characterized by gel permeation chromatography and rheological measurements, and solid and printed objects were characterized by static and dynamic tensile testing. Rheological studies confirmed all resin formulations displayed shear-thinning behavior ideal for SLA printing. Mechanical testing revealed that varying diacid and diol components could modulate tensile elastic modulus and elongation at break from 0.1-1.0 GPa and 3.5-8.5%, respectively. Printability was assessed by printing a resolution test structure on a DLP 3D printer equipped with a 405 nm UV source. This ability to tailor the properties of bio-based polyester resins by molecular design provides an avenue for fabricating high-performance SLA-printed objects targeted for specific applications ranging from prototypes to end-use products.

Biocompatible PVAc- g -PLLA Acrylate Polymers for DLP 3D Printing with Tunable Mechanical Properties

Development of Mechanically Enhanced Polycaprolactone Composites by a Functionalized Titanate Nanofiller for Melt Electrowriting in 3D Printing.

Mechanically tunable resins based on acrylate-based resin for digital light processing (DLP) 3D printing

Tailoring Mechanical Properties for Additive Manufacturing: Strategic Molecular Design of UV-Curable Bio-based Oligomeric Polyester Resins via Diacid and Diol Exploration

Digital Light 3D Printing of Double Thermoplastics with Customizable Mechanical Properties and Versatile Reprocessability

Tailoring Mechanical Properties for Additive Manufacturing: Strategic Molecular Design of UV-Curable Bio-based Oligoester Resins via Diacid and Diol Exploration

Digital Light Processing-3D Printing of Thermoset Materials with High Biodegradability from Amino Acid-Derived Acrylamide Monomers

Digital Light Processing (DLP) 3D Printing of Caprolactone Copolymers with Tailored Properties through Crystallinity

Biodegradable Poly(ester) Urethane Acrylate Resins for Digital Light Processing: From Polymer Synthesis to 3D Printed Tissue Engineering Constructs

Vat Photopolymerization 3D-Printing of Dynamic Thiol-Acrylate Photopolymers Using Bio-Derived Building Blocks

Digital Light Processing 3D Printing of Enhanced Polymers via Interlayer Welding

Synthesis and Formulation of PCL-Based Urethane Acrylates for DLP 3D Printers

Digital Light Processing Route for 3D Printing of Acrylate-Modified PLA/Lignin Blends: Microstructure and Mechanical Performance

Functional Materials for DLP-SLA 3D Printing Using Thiol–Acrylate Chemistry: Resin Design and Postprint Applications

Design and synthesis of photocrosslinker and light blocker based on l-Amino acid polyester and their application in solvent-free resin formulation for DLP/SLA 3D printing

Fabrication, mechanical, finite element and In vitro evaluation of 3D printed polylactide/biphasic calcium phosphate composite blends

Sustainable and Recyclable Acrylate Resins for Liquid-Crystal Display 3D Printing Based on Lipoic Acid

Titanium nanoparticles bonded polyacrylates with enhanced properties fabricated using DLP 3D printing

Functionalized poly l-lactic acid synthesis and optimization of process parameters for 3D printing of porous scaffolds via digital light processing (DLP) method

Development of Biocompatible Digital Light Processing Resins for Additive Manufacturing Using Visible Light-Induced RAFT Polymerization