Abstract:Statement of problem: Three-dimensional printing has the potential for clinical applications, and additive manufacturing materials for dental use merit further investigation. Purpose: The purpose of this in vitro study was to evaluate the properties of materials formulated with ethoxylated bisphenol A-dimethacrylate (Bis-EMA), urethane dimethacrylate (UDMA), and triethylene glycol dimethacrylate (TEGDMA) as 3D printing resins for ultraviolet digital light processing (UV-DLP) 3D printers and to characterize the mechanical and biological properties and accuracy of the printed objects. Material and methods: Ten different light-polymerized resins were formulated using Bis-EMA, UDMA, and TEGDMA. Their viscosities were measured, and only 7 resins with viscosities lower than 1500 centipoise (cP) were selected for 3D printing and further material characterization. The light-polymerized resins were printed into representative shapes using a custom-made 3D printer equipped with a 405-nm UV-DLP projector as the light source. The printed specimens were subjected to biologic, mechanical, and accuracy tests, and the data were submitted to 1-way ANOVA and Tukey post hoc comparisons (α=.05). Results: Photopolymerizable resins made of Bis-EMA, UDMA, and TEGDMA were successfully formulated for 3D printing to fabricate objects of various shapes and sizes. TEGDMA served as the diluent to reduce the viscosity and increase the degree of conversion, while UDMA and Bis-EMA provided strength as demonstrated by the mechanical testing. All the printed objects passed cytotoxicity testing. The flexural strengths of the printed specimens ranged between 60 MPa and 90 MPa; flexural modulus ranged between 1.7 GPa and 2.1 GPa; and surface hardness ranged between 14.5 HV and 24.6 HV. These represent similar mechanical properties to those of currently used clinical resin materials. In the accuracy test, the resin mixture composed of 80% Bis-EMA, 10% UDMA, and 10% TEGDMA had the highest accuracy, with a 0.051-mm deviation from the original design. Conclusions: Bis-EMA, UDMA, and TEGDMA are good candidates for the formulation of 3D printing resins for dental use. The printed objects demonstrated favorable biological and mechanical properties. Further, the accuracy of the printed specimens showed potential for clinical application.

Synthesis and Formulation of PCL-Based Urethane Acrylates for DLP 3D Printers

Development of Mechanically Enhanced Polycaprolactone Composites by a Functionalized Titanate Nanofiller for Melt Electrowriting in 3D Printing.

Biodegradable Poly(ester) Urethane Acrylate Resins for Digital Light Processing: From Polymer Synthesis to 3D Printed Tissue Engineering Constructs

Medical-Grade PCL Based Polyurethane System for FDM 3D Printing—Characterization and Fabrication

Digital Light Processing (DLP) 3D Printing of Caprolactone Copolymers with Tailored Properties through Crystallinity

Mechanically tunable resins based on acrylate-based resin for digital light processing (DLP) 3D printing

A photocurable polyurethane elastomer for digital light processing with comprehensive reusability based on dynamic hindered urea bonds

Tailoring Mechanical Properties for Additive Manufacturing: Strategic Molecular Design of UV-Curable Bio-based Oligomeric Polyester Resins via Diacid and Diol Exploration

Tailoring Mechanical Properties for Additive Manufacturing: Strategic Molecular Design of UV-Curable Bio-based Oligoester Resins via Diacid and Diol Exploration

Investigating the Structure–Property−Processing Relationship of Polycaprolactone-Based 3D Printed Self-Healing Polymer Blends

Mechanical Properties and Biocompatibility of Urethane Acrylate-Based 3D-Printed Denture Base Resin

Tailorable acrylate-endcapped urethane-based polymers for precision in digital light processing: Versatile solutions for biomedical applications

Mechanical properties, accuracy, and cytotoxicity of UV-polymerized 3D printing resins composed of Bis-EMA, UDMA, and TEGDMA

Four-dimensional Printing of Shape Memory Polyurethanes with High Strength and Recyclability Based on Diels-Alder Chemistry

Digital Light Processing Route for 3D Printing of Acrylate-Modified PLA/Lignin Blends: Microstructure and Mechanical Performance

Advanced Bioresin Formulation for 3D-Printed Bone Scaffolds: PCLDMA and p-PLA Integration

Synthesis and Solvent Free DLP 3D Printing of Degradable Poly(Allyl Glycidyl Ether Succinate)

Preparation of photosensitive resin based on poly (trimethylene ether glycol) for 3D printing

Synthesis and properties of a low-viscosity UV-curable oligomer for three-dimensional printing

Effect of functionality of diluents on digital light processing (DLP) based three‐dimensional (3D) printing of UV‐curable bisphenol A‐based epoxy acrylate resin

Thermoplastic PCL- b-PEG- b-PCL and HDI Polyurethanes for Extrusion-Based 3D-Printing of Tough Hydrogels