Abstract:In hydrofracture stress measurements, the magnitude of the maximum horizontal stress, SH, is commonly estimated from the borehole pressure required to reopen an induced axial crack. Examination of the processes which govern the borehole pressure history recorded during the reopening cycle of such tests indicates two sources of error in the estimates of SH derived using the conventional method proposed by Bredehoeft et al. [Bredehoeft JD, Wolff RG, Keys WS and Shutter E, 1976, Colorado. Geol. Soc. Amer. Bull., 87, 250–8]. The first arises from the failure to include a term arising from pressure penetration into the crack prior to reopening in the force balance acting across the mouth of the induced axial cracks. The problem can be remedied by using a modified ‘reopening equation’ which includes pressure penetration of the crack. The second source of error is more problematic and concerns the correct identification of the true reopening pressure from the borehole pressure records. Analysis of the process of reopening aided by numerical simulations shows that the true reopening pressure is generally less than the apparent (i.e. that detected) reopening pressure. The discrepancy between true and apparent reopening pressures increases with larger hydraulic compliance of the test equipment. The compliance in question refers to that of the fluid volume between the flow meter and the crack mouth(s). Simulation of a pair of 1 m high axial cracks with 2 μm residual hydraulic aperture in a 100 mm borehole, indicates that the system compliance must be reduced to 5×10−7 m3/MPa to enable the true reopening pressure to be estimated to better than 10%, at flow rate is less than 10−4 m3/s. This is several orders of magnitude less than applies to conventional hydrofracture systems, but is attainable for tests in small holes at shallow depth by making relatively minor system modifications. Tests at greater depth, however, would seem to require downhole measurement of flow at the packers. We validate our assertions with a field test in which reopening pressure was determined mechanically and hydraulically.

The critical pressures for crack closure, crack reopening and crack instability in hydraulic fracturing

Theoretical Analysis of Crack Reopening Behavior in Hydraulic Fracturing Tectonic Stress Measurements

Reopening Behavior of Transverse Cracks in Hydraulic Fracturing Tectonic Stress Measurements.

Analysis of crack reopening behavior for hydrofrac stress measurement

Critical Pressure of Closure Fracture Reopening and Propagation: Modeling and Applications

Hydraulic fracture reopening pressure and the estimation of maximum horizontal stress

A Micro-Macro Mechanism of Hydraulic Fracturing with Initial Stress State Effect of Brittle Rock

Crack Opening and Slippage Signatures During Stimulation of Bedded Montney Rock Under Laboratory True-Triaxial Hydraulic Fracturing Experiments

Why Fracking Works and How to Optimize It

Investigations into the opening of fractures during hydraulic testing using a hybrid-dimensional flow formulation

An Innovative Method to Analyze the Hydraulic Fracture Reopening Pressure of Hot Dry Rock

STUDY ON CLOSING LAW OF CRACK IN ROCK MASS UNDER COMPRESSION

A semi‐analytical model for capturing dynamic behavior of hydraulic fractures during flowback period in tight oil reservoir

Effects of Confining Stresses, Pre-crack Inclination Angles and Injection Rates: Observations from Large-Scale True Triaxial and Hydraulic Fracturing Tests in Laboratory

Stress state analysis in the vicinity of the hydraulic fracturing tool located near the bottom of the well

Hydraulic and Mechanical Relationship of Individual Fracture in Rock under Compression and Shearing: Theoretical Study

Distribution Relationship of Pore Pressure and Matrix Stress during Hydraulic Fracturing

Modelling Rock Fracture Induced By Hydraulic Pulses

Crack propagation mechanism of rock-like specimens containing non-parallel flaws subjected to internal hydraulic pressure and shear loading

Impact of stress-driven crack growth on the emergence of anomalous transport in critically connected natural fracture networks

Modeling of Borehole Hydraulic Fracture Initiation and Propagation with Pre-existing Cracks Using the Displacement Discontinuity Method