Abstract:Hydraulic fracturing is widely used to stimulate unconventional reservoirs, but a systematic and comprehensive investigation into the hydraulic fracturing process is insufficient. In this work, a discrete element-lattice Boltzmann method is implemented to simulate the hydro-mechanical behavior in a hydraulic fracturing process. Different influential factors, including treatment parameters (injection rates and fluid viscosity), formation parameters (in situ stress states and natural fractures) and rock properties (heterogeneity of rock strengths and rock permeability), are considered and their impacts on the initiation and propagation of hydraulic fractures are evaluated. A higher injection rate, increased viscosity, and larger in situ stress will lead to an increase in the initiation pressure. Conversely, higher formation permeability and a greater degree of heterogeneity in bond strengths will result in a decrease in the initiation pressure. The complexity of generated fractures is significantly influenced by the injection rate and degree of heterogeneity. However, fluid viscosity, in situ stress states, and formation permeability individually do not affect the geometrical complexity. Shear displacement can occur during a hydraulic fracturing process due to increased pore pressure and variations in in situ stress caused by injected fluid. Low-viscosity fluid with a high injection rate can have a significant pressure buildup and generate complex fracture networks in low-permeability heterogeneous formations. Natural fractures can significantly impact the complexity of generated fractures, while more in-depth research is required regarding complex natural fracture distributions. Hydraulic fracturing technique is essential for the development of unconventional reserves, such as shale gas/oil and geothermal reservoirs. To optimize field operations and properly estimate the stimulation reservoir volume, it is necessary to investigate the impact of influential factors. In this work, we adopt a numerical scheme (DEM-LBM) to investigate the process in detail and consider as many factors as possible, including treatment parameters (injection rates and fluid viscosity), formation parameters (in situ stress states and preexisting natural fractures), and rock properties (heterogeneity of rock strengths and rock permeability). The impacts of those influential factors on the initiation and propagation of hydraulic fractures are evaluated. We find that all factors have a significant impact on fracture initiation pressure. However, the complexity of generated fractures is mainly affected by injection rates and heterogeneity degrees of rock strengths. The combination of low-viscosity fluid and a high injection rate can result in the generation of a much more complex fracture network in a low-permeability heterogeneous formation. The existence of natural fractures can significantly influence the complexity of the generated fracture networks. Further research on natural fracture networks is feasible based on the foundation established in this work. Different influential factors have significant impacts on the initiation pressureExistence of natural fractures, high injection rates and heterogeneity degrees increase the geometrical complexity of fracturesLow-viscosity fluid combined with a high injection rate leads to a complex fracture network in low-permeability heterogeneous formation

Effects of Confining Stresses, Pre-crack Inclination Angles and Injection Rates: Observations from Large-Scale True Triaxial and Hydraulic Fracturing Tests in Laboratory

Effects of Geo-Stress and Natural Fracture Strength on Hydraulic Fracture Propagation in a Deep Fractured Tight Sandstone Reservoir

Study of stress field induced by natural fracture and its influence on hydraulic fracture propagation

Laboratory Scale Research on the Impact of Stress Shadow and Natural Fractures on Fracture Geometry During Horizontal Multi-Staged Fracturing in Shale

Numerical Analysis on the Formation of Fracture Network during the Hydraulic Fracturing of Shale with Pre-Existing Fractures

A Micro-Macro Mechanism of Hydraulic Fracturing with Initial Stress State Effect of Brittle Rock

Physical Simulation Experiments of Hydraulic Fracture Initiation and Propagation under the Influence of Deep Shale Natural Fractures

Combined Effect of In Situ Stress Level and Bedding Anisotropy on Hydraulic Fracture Vertical Growth in Deep Marine Shale Revealed via CT Scans and Acoustic Emission

Crack Opening and Slippage Signatures During Stimulation of Bedded Montney Rock Under Laboratory True-Triaxial Hydraulic Fracturing Experiments

Experimental Study of Hydraulic Fracturing for Shale by Stimulated Reservoir Volume

Research on the impact of pre‐existing geological fractures on hydraulic fracturing in high in situ stress environments

3D Observations of the Hydraulic Fracturing Process for a Model Non-Cemented Horizontal Well under True Triaxial Conditions Using an X-ray CT Imaging Technique

Experimental study on the effects of pre-cracks, fracturing fluid, and rock mechanical characteristics on directional hydraulic fracturing with axial pre-cracks

Experimental and Numerical Study of Hydraulic Fracture Geometry in Shale Formations with Complex Geologic Conditions

Contributions of Non-Tectonic Micro-Fractures to Hydraulic Fracturing—a Numerical Investigation Based on FSD Model

Numerical Investigation of Influence of In-Situ Stress Ratio, Injection Rate and Fluid Viscosity on Hydraulic Fracture Propagation Using a Distinct Element Approach

Effect of Reservoir Porosity and Clay Content on Hydraulic Fracture Height Containment

Simulation Study on of Characteristics of Hydraulic Fracturing Propagation

Numerical Investigation of Influential Factors in Hydraulic Fracturing Processes Using Coupled Discrete Element-Lattice Boltzmann Method

Numerical Simulation of Stress Disturbance Mechanism Caused by Hydraulic Fracturing of Shale Formation