Abstract:The heterogeneity in fracture formation significantly influences the hydraulic fracture propagation among adjacent wells, underscoring the urgency to comprehend the underlying fracture mechanisms. Specifically, in shale gas or oil extraction fracturing operations, stress interactions among neighboring fracturing clusters, or mutual interference during the propagation of parallel fractures, are commonplace. At present, there is relatively little research on the sensitivity parameters of adjacent borehole fracture propagation morphology. Consequently, we employed ABAQUS software 2022 to construct a numerical model simulating the fracturing of adjacent boreholes in opposing directions. Upon validating the model's fidelity, we systematically explored the influence of various engineering and geological factors on fracture morphology and propagation length. Our findings revealed a three-phase evolution: independent fracture propagation, subsequent mutual repulsion, and, ultimately, mutual attraction. It is worth noting that increasing the elastic modulus from 10 GPa to 80 GPa, and increasing the crack length by 16.30%, is beneficial for crack propagation, while the horizontal stress difference profoundly shapes the crack mode, but has a relatively small impact on the overall crack length. When HSD increases from 0 MPa to 15 MPa, the total crack length only changes by 1.24%. In addition, the filtration coefficient of the reservoir is a key determining factor that has a significant impact on the morphology and length of cracks generated by adjacent boreholes. Increasing the filtration coefficient from 1 × 10−14 m3/s/Pa to 5 × 10−12 m3/s/Pa reduces the total length of cracks by 60.77%. Notably, an optimal injection rate exists, optimizing fracturing outcomes. Conversely, the viscosity of the fracturing fluid exerts a limited influence on fracture morphology and length within the confines of this simulation, allowing for the selection of a suitable viscosity to ensure smooth proppant transport during actual fracturing operations. In designing fracturing parameters, it is imperative to aim for sufficient fracture propagation length while harnessing "stress interference" to foster the development of intricate fracture networks. Ultimately, our research findings serve as a solid foundation for engineering practices involving hydraulic fracture propagation in adjacent boreholes undergoing opposing fracturing operations.

Modeling of Borehole Hydraulic Fracture Initiation and Propagation with Pre-existing Cracks Using the Displacement Discontinuity Method

Experimental and Modeling Investigation of Fracture Initiation from Open-Hole Horizontal Wells in Permeable Formations

Numerical Simulation of Hydraulic Fracture Propagation in Unconsolidated Sandstone Reservoirs

A Dynamic Propagation Numerical Model of Hydraulic Fracture Interactions with Pre-Existing Complex Natural Fractures

3D Numerical Modeling of the Propagation of Hydraulic Fracture at Its Intersection with Natural (Pre-existing) Fracture

A Semi-Analytical Model for Studying the Transient Flow Behavior of Nonuniform-Width Fractures in a Three-Dimensional Domain

Numerical Analysis on the Formation of Fracture Network during the Hydraulic Fracturing of Shale with Pre-Existing Fractures

Investigation of coupled hydro-mechanical modelling of hydraulic fracture propagation and interaction with natural fractures

A New Approach to the Modeling of Hydraulic-Fracturing Treatments in Naturally Fractured Reservoirs

A 3D Numerical Model for Studying the Effect of Interface Shear Failure on Hydraulic Fracture Height Containment

Numerical study of hydraulic fractures propagation in deep fracture-cavity reservoir based on continuous damage theory

Numerical Simulation of 3D Hydraulic Fracturing Based on an Improved Flow-Stress-Damage Model and a Parallel FEM Technique

Visualization of hydraulic fracture interacting with pre-existing fracture

Numerical Simulation Study on Dynamic Interaction between Two Adjacent Wells during Hydraulic Fracturing

Numerical Simulation of Hydraulic Fracture Propagation on Multilayered Formation Using Limited Entry Fracturing Technique

Influence of Single Fracture Inclination on Fault Activation

Simulation of dynamic pulsing fracking in poroelastic media by a hydro-damage-mechanical coupled cohesive phase field model

Mixed-Mode Fracture Modelling of the Near-Wellbore Interaction Between Hydraulic Fracture and Natural Fracture

Effect of Borehole Radial Pore Pressure Gradient on the Initiation and Propagation of Sandstone Hydraulic Fractures

Hydro-mechanical Coupled Mechanisms of Hydraulic Fracture Propagation in Rocks with Cemented Natural Fractures