Abstract:Abstract Structural Health Monitoring (SHM) uses sensors in advanced engineering structures to evaluate integrity and detect damage or deformation affecting structural performance, e.g. cracks, holes, or corrosion. Carbon fiber (CF) textile composites are commonly used to reinforce structures such as aircraft, vehicles, or bridges due to their high tensile strength to weight ratio, chemical resistance, and thermal and electrical conductivity. Printing electronics on textiles is a scalable manufacturing technology combining the physical properties of textile materials with the added functionality of electronic elements making them self-sensing. Extrusion printing is a contactless digital printing method to print electrical conductors and passive circuit elements. This paper proposes to combine conventional CF composite manufacturing processes with printed conductors to create self-sensing CF textile composites. Damage is sensed by measuring resistance changes in a CF sheet. Contacts are extrusion printed directly on woven CF sheets using silver flake ink. A multiplexed Kelvin Double Bridge circuit is the read-out interface. This allows small resistance changes due to damage to be measured in a four-point configuration. The circuit is connected to the printed contacts on the CF sheet through multiplexers to detect damage in different locations. This 2D digital sensor can detect the location and size of damage holes for SHM. The resolution of the sensor is controlled by the location and spacing of the silver electrodes, which were studied experimentally and by simulation. The resolution is 26 mm in the current direction and 16 mm in the orthogonal direction. The threshold of detectable damage is 4 mm 2 . Simulation of the sensor as an isotropic 2D conductor shows good agreement with experimental results for the orthotropic fabric. The resultant sensing device could be integrated into many composite structures as one of its layers or simply printed on the surface to create smart structures.

High sensitivity self-sensing damage of thick carbon fiber 3D woven angle-interlock composites with oblique current

Review of Self-Sensing of Damage and Interfacial Evaluation Using Electrical Resistance Measurements in Nano/micro Carbon Materials-Reinforced Composites

Interfacial Strengthening and Self-Monitoring in Carbon Fiber-Reinforced Composites via Carbon Nanotube-Based Damage Sensors

Thickness Measurement of Composite Material Using Eddy Current Testing

Impact damage reduction of woven composites subject to pulse current

Self-Sensing Of Position-Related Loads In Continuous Carbon Fibers-Embedded 3d-Printed Polymer Structures Using Electrical Resistance Measurement

Large-scale deformation and damage detection of 3D printed continuous carbon fiber reinforced polymer-matrix composite structures

A technique for real-time detecting, locating, and quantifying damage in large polymer composite structures made of carbon fibers and carbon nanotube networks

Precise Damage Shaping in Self-Sensing Composites Using Electrical Impedance Tomography and Genetic Algorithms

Real-time self-monitoring and smart bend recognizing of fiber-reinforced polymer composites enabled by embedded magnetic fibers

Damage location sensing in carbon fiber composites using extrusion printed electronics

Anisotropy characteristics of electrical conductivity and compressive strength of 3D carbon fiber/epoxy angle-interlock woven composites

Tensile damage self-monitoring of carbon fiber/epoxy 3D braided composites with electrical resistance method

Carbon fiber reinforced composites with self‐sensing and self‐healing capabilities enabled by CNT‐modified nanofibers

In Situ Damage Sensing in the Glass Fabric Reinforced Epoxy Composites Containing CNT–Al2O3 Hybrids

In-situ damage self-sensing and strength recovery activated by self-electricity in carbon fibrous composites embedded with multi-functional interleaves

A high-performance, sensitive, low-cost LIG/PDMS strain sensor for impact damage monitoring and localization in composite structures

Accurate damage localization and enhanced mechanical performance of self‐sensing epoxy nanocomposites using graphene platelets

Failure behavior and damage visualization of thick carbon/aramid hybrid woven composites under flexural loading conditions

Damage analysis of combined continuous and discontinuous thin‐ply carbon/glass hybrid composite using acoustic emission

Structural Health Monitoring of Glass Fiber-Reinforced Polymer Laminates with Carbon Nanotube-Coated Glass Fiber Sensing Layer after Low-Velocity Impact Using Electrical Resistance Tomography